Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1547463 > unrolled thread

[PATCH v4 1/5] devicetree: mfd: Add binding for the TI LM3533

Back to article view | Back to linux.kernel

Contents

  [PATCH v4 1/5] devicetree: mfd: Add binding for the TI LM3533 Bjorn Andersson <bjorn.andersson@linaro.org> - 2016-12-27 03:20 +0100
    Re: [PATCH v4 1/5] devicetree: mfd: Add binding for the TI LM3533 Jonathan Cameron <jic23@kernel.org> - 2016-12-30 21:00 +0100
    Re: [PATCH v4 1/5] devicetree: mfd: Add binding for the TI LM3533 Rob Herring <robh@kernel.org> - 2017-01-03 18:00 +0100
    Re: [PATCH v4 1/5] devicetree: mfd: Add binding for the TI LM3533 Lee Jones <lee.jones@linaro.org> - 2017-01-04 16:30 +0100

#1547463 — [PATCH v4 1/5] devicetree: mfd: Add binding for the TI LM3533

From: Bjorn Andersson <bjorn.andersson@sonymobile.com>

Add the binding for the Texas Instruments LM3533 lighting power
solution.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

I had Acks from Jonathan and Rob on v3, but dropped these due to the added
compatible properties.

Changes since v3:
- Added compatible to sub-nodes, per Lee's requested to treat them as separate
  pieces.

 Documentation/devicetree/bindings/mfd/lm3533.txt | 205 +++++++++++++++++++++++
 1 file changed, 205 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/lm3533.txt

diff --git a/Documentation/devicetree/bindings/mfd/lm3533.txt b/Documentation/devicetree/bindings/mfd/lm3533.txt
new file mode 100644
index 000000000000..909281096ba2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/lm3533.txt
@@ -0,0 +1,205 @@
+Texas Instruments LM3533 binding
+
+This binding describes the Texas Instruments LM3533, a lighting power solution
+for smartphone handsets. The common properties are described directly in the
+node, while each individual component are described in an optional subnode.
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be:
+		    "ti,lm3533"
+
+- reg:
+	Usage: required
+	Value type: <u32>
+	Definition: i2c address of the LM3533 chip
+
+- als-supply:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: reference to regulator powering the V_als input; as
+		    specified in "../regulator/regulator.txt"
+
+- hwen-gpios:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: reference to gpio pin connected to the HWEN input; as
+		    specified in "../gpio/gpio.txt"
+
+- ti,boost-freq-hz:
+	Usage: required
+	Value type: <u32>
+	Definition: switch-frequency of the boost converter, must be either:
+		    500000 or 1000000
+
+- ti,boost-ovp-mv:
+	Usage: required
+	Value type: <u32>
+	Definition: over-voltage protection limit, in mV. Must be one of:
+		    16000, 24000, 32000 or 40000
+
+- #address-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 1
+
+- #size-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 0
+
+= ALS SUBNODE
+The ambient light sensor subnode carrying the light sensor related properties.
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be:
+		    "ti,lm3533-als"
+
+- ti,als-resistance-ohm:
+	Usage: required (unless ti,pwm-mode is specified)
+	Value type: <u32>
+	Definition: specifies the resistor value (R_als), in Ohm. Valid values
+		    ranges from 200000 to 1574 Ohm.
+
+- ti,pwm-mode:
+	Usage: optional
+	Value type: <empty>
+	Definition: specifies, if present, that the als should operate in PWM
+		    mode - rather than analog mode
+
+= BACKLIGHT NODES
+Backlight subnodes carrying the backlight related properties.
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be:
+		    "ti,lm3533-backlight"
+
+- reg:
+	Usage: required
+	Value type: <u32>
+	Definition: specifies which of the two backlights this node corresponds
+		    to
+
+- default-brightness:
+	Usage: optional
+	Value type: <32>
+	Definition: specifies the default brightness for the backlight, in
+		    units of brightness [0-255]
+
+- label:
+	Usage: required
+	Value type: <string>
+	Definition: specifies a name of this backlight
+
+- led-max-microamp:
+	Usage: required
+	Value type: <u32>
+	Definition: specifies the max current for this backlight, in uA, as
+		    described in "../leds/common.txt"
+
+- ti,pwm-zones:
+	Usage: optional
+	Value type: <u32 list>
+	Definition: lists the ALS zones to be PWM controlled for this backlight,
+		    the values in the list are in the range [0 - 4]
+
+= LED NODES
+LED subnodes carrying the LED related properties.
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be:
+		    "ti,lm3533-led"
+
+- reg:
+	Usage: required
+	Value type: <u32>
+	Definition: specifies which of the four LEDs this node corresponds to
+
+- linux,default-trigger:
+	Usage: optional
+	Value type: <string>
+	Definition: specifies the default trigger for the LED, as described in
+		    "../leds/common.txt"
+
+- label:
+	Usage: required
+	Value type: <string>
+	Definition: specifies a name of this LED, as described in
+		    "../leds/common.txt"
+
+- led-max-microamp:
+	Usage: required
+	Value type: <u32>
+	Definition: specifies the max current for this LED, in uA, as described
+		    in "../leds/common.txt"
+
+- ti,pwm-zones:
+	Usage: optional
+	Value type: <u32 list>
+	Definition: lists the ALS zones to be PWM controlled for this LED, the
+		    values in the list are in the range [0 - 4]
+
+= EXAMPLE
+
+i2c@12460000 {
+	compatible = "qcom,i2c-qup-v1.1.1";
+	...
+
+	lm3533@36 {
+		compatible = "ti,lm3533";
+		reg = <0x36>;
+
+		als-supply = <&pm8921_l11>;
+		hwen-gpios = <&pm8921_gpio 26 GPIO_ACTIVE_HIGH>;
+
+		ti,boost-freq-hz = <500000>;
+		ti,boost-ovp-mv = <24000>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		als {
+			compatible = "ti,lm3533-als";
+			ti,als-resistance-ohm = <200000>;
+		};
+
+		backlight@0 {
+			compatible = "ti,lm3533-backlight";
+			reg = <0>;
+			label = "backlight";
+
+			led-max-microamp = <20200>;
+		};
+
+		led@0 {
+			compatible = "ti,lm3533-led";
+			reg = <0>;
+			label = "red";
+
+			led-max-microamp = <5000>;
+		};
+
+		led@1 {
+			compatible = "ti,lm3533-led";
+			reg = <1>;
+			label = "green";
+
+			led-max-microamp = <5000>;
+		};
+
+		led@2 {
+			compatible = "ti,lm3533-led";
+			reg = <2>;
+			label = "blue";
+
+			led-max-microamp = <5000>;
+		};
+	};
+
-- 
2.11.0

[toc] | [next] | [standalone]

#1548723

On 26/12/16 18:11, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@sonymobile.com>
> 
> Add the binding for the Texas Instruments LM3533 lighting power
> solution.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> 
> I had Acks from Jonathan and Rob on v3, but dropped these due to the added
> compatible properties.
Looks sensible to me

Acked-by: Jonathan Cameron <jic23@kernel.org>
> 
> Changes since v3:
> - Added compatible to sub-nodes, per Lee's requested to treat them as separate
>   pieces.
> 
>  Documentation/devicetree/bindings/mfd/lm3533.txt | 205 +++++++++++++++++++++++
>  1 file changed, 205 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/lm3533.txt
> 
> diff --git a/Documentation/devicetree/bindings/mfd/lm3533.txt b/Documentation/devicetree/bindings/mfd/lm3533.txt
> new file mode 100644
> index 000000000000..909281096ba2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/lm3533.txt
> @@ -0,0 +1,205 @@
> +Texas Instruments LM3533 binding
> +
> +This binding describes the Texas Instruments LM3533, a lighting power solution
> +for smartphone handsets. The common properties are described directly in the
> +node, while each individual component are described in an optional subnode.
> +
> +- compatible:
> +	Usage: required
> +	Value type: <stringlist>
> +	Definition: must be:
> +		    "ti,lm3533"
> +
> +- reg:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: i2c address of the LM3533 chip
> +
> +- als-supply:
> +	Usage: optional
> +	Value type: <prop-encoded-array>
> +	Definition: reference to regulator powering the V_als input; as
> +		    specified in "../regulator/regulator.txt"
> +
> +- hwen-gpios:
> +	Usage: required
> +	Value type: <prop-encoded-array>
> +	Definition: reference to gpio pin connected to the HWEN input; as
> +		    specified in "../gpio/gpio.txt"
> +
> +- ti,boost-freq-hz:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: switch-frequency of the boost converter, must be either:
> +		    500000 or 1000000
> +
> +- ti,boost-ovp-mv:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: over-voltage protection limit, in mV. Must be one of:
> +		    16000, 24000, 32000 or 40000
> +
> +- #address-cells:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: must be 1
> +
> +- #size-cells:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: must be 0
> +
> += ALS SUBNODE
> +The ambient light sensor subnode carrying the light sensor related properties.
> +
> +- compatible:
> +	Usage: required
> +	Value type: <stringlist>
> +	Definition: must be:
> +		    "ti,lm3533-als"
> +
> +- ti,als-resistance-ohm:
> +	Usage: required (unless ti,pwm-mode is specified)
> +	Value type: <u32>
> +	Definition: specifies the resistor value (R_als), in Ohm. Valid values
> +		    ranges from 200000 to 1574 Ohm.
> +
> +- ti,pwm-mode:
> +	Usage: optional
> +	Value type: <empty>
> +	Definition: specifies, if present, that the als should operate in PWM
> +		    mode - rather than analog mode
> +
> += BACKLIGHT NODES
> +Backlight subnodes carrying the backlight related properties.
> +
> +- compatible:
> +	Usage: required
> +	Value type: <stringlist>
> +	Definition: must be:
> +		    "ti,lm3533-backlight"
> +
> +- reg:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: specifies which of the two backlights this node corresponds
> +		    to
> +
> +- default-brightness:
> +	Usage: optional
> +	Value type: <32>
> +	Definition: specifies the default brightness for the backlight, in
> +		    units of brightness [0-255]
> +
> +- label:
> +	Usage: required
> +	Value type: <string>
> +	Definition: specifies a name of this backlight
> +
> +- led-max-microamp:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: specifies the max current for this backlight, in uA, as
> +		    described in "../leds/common.txt"
> +
> +- ti,pwm-zones:
> +	Usage: optional
> +	Value type: <u32 list>
> +	Definition: lists the ALS zones to be PWM controlled for this backlight,
> +		    the values in the list are in the range [0 - 4]
> +
> += LED NODES
> +LED subnodes carrying the LED related properties.
> +
> +- compatible:
> +	Usage: required
> +	Value type: <stringlist>
> +	Definition: must be:
> +		    "ti,lm3533-led"
> +
> +- reg:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: specifies which of the four LEDs this node corresponds to
> +
> +- linux,default-trigger:
> +	Usage: optional
> +	Value type: <string>
> +	Definition: specifies the default trigger for the LED, as described in
> +		    "../leds/common.txt"
> +
> +- label:
> +	Usage: required
> +	Value type: <string>
> +	Definition: specifies a name of this LED, as described in
> +		    "../leds/common.txt"
> +
> +- led-max-microamp:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: specifies the max current for this LED, in uA, as described
> +		    in "../leds/common.txt"
> +
> +- ti,pwm-zones:
> +	Usage: optional
> +	Value type: <u32 list>
> +	Definition: lists the ALS zones to be PWM controlled for this LED, the
> +		    values in the list are in the range [0 - 4]
> +
> += EXAMPLE
> +
> +i2c@12460000 {
> +	compatible = "qcom,i2c-qup-v1.1.1";
> +	...
> +
> +	lm3533@36 {
> +		compatible = "ti,lm3533";
> +		reg = <0x36>;
> +
> +		als-supply = <&pm8921_l11>;
> +		hwen-gpios = <&pm8921_gpio 26 GPIO_ACTIVE_HIGH>;
> +
> +		ti,boost-freq-hz = <500000>;
> +		ti,boost-ovp-mv = <24000>;
> +
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		als {
> +			compatible = "ti,lm3533-als";
> +			ti,als-resistance-ohm = <200000>;
> +		};
> +
> +		backlight@0 {
> +			compatible = "ti,lm3533-backlight";
> +			reg = <0>;
> +			label = "backlight";
> +
> +			led-max-microamp = <20200>;
> +		};
> +
> +		led@0 {
> +			compatible = "ti,lm3533-led";
> +			reg = <0>;
> +			label = "red";
> +
> +			led-max-microamp = <5000>;
> +		};
> +
> +		led@1 {
> +			compatible = "ti,lm3533-led";
> +			reg = <1>;
> +			label = "green";
> +
> +			led-max-microamp = <5000>;
> +		};
> +
> +		led@2 {
> +			compatible = "ti,lm3533-led";
> +			reg = <2>;
> +			label = "blue";
> +
> +			led-max-microamp = <5000>;
> +		};
> +	};
> +
> 

[toc] | [prev] | [next] | [standalone]

#1549956

On Mon, Dec 26, 2016 at 10:11:49AM -0800, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@sonymobile.com>
> 
> Add the binding for the Texas Instruments LM3533 lighting power
> solution.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> 
> I had Acks from Jonathan and Rob on v3, but dropped these due to the added
> compatible properties.
> 
> Changes since v3:
> - Added compatible to sub-nodes, per Lee's requested to treat them as separate
>   pieces.

Acked-by: Rob Herring <robh@kernel.org>

[toc] | [prev] | [next] | [standalone]

#1550917

On Mon, 26 Dec 2016, Bjorn Andersson wrote:

> From: Bjorn Andersson <bjorn.andersson@sonymobile.com>
> 
> Add the binding for the Texas Instruments LM3533 lighting power
> solution.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

For my own reference:
  Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>

> ---
> 
> I had Acks from Jonathan and Rob on v3, but dropped these due to the added
> compatible properties.
> 
> Changes since v3:
> - Added compatible to sub-nodes, per Lee's requested to treat them as separate
>   pieces.
> 
>  Documentation/devicetree/bindings/mfd/lm3533.txt | 205 +++++++++++++++++++++++
>  1 file changed, 205 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/lm3533.txt
> 
> diff --git a/Documentation/devicetree/bindings/mfd/lm3533.txt b/Documentation/devicetree/bindings/mfd/lm3533.txt
> new file mode 100644
> index 000000000000..909281096ba2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/lm3533.txt
> @@ -0,0 +1,205 @@
> +Texas Instruments LM3533 binding
> +
> +This binding describes the Texas Instruments LM3533, a lighting power solution
> +for smartphone handsets. The common properties are described directly in the
> +node, while each individual component are described in an optional subnode.
> +
> +- compatible:
> +	Usage: required
> +	Value type: <stringlist>
> +	Definition: must be:
> +		    "ti,lm3533"
> +
> +- reg:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: i2c address of the LM3533 chip
> +
> +- als-supply:
> +	Usage: optional
> +	Value type: <prop-encoded-array>
> +	Definition: reference to regulator powering the V_als input; as
> +		    specified in "../regulator/regulator.txt"
> +
> +- hwen-gpios:
> +	Usage: required
> +	Value type: <prop-encoded-array>
> +	Definition: reference to gpio pin connected to the HWEN input; as
> +		    specified in "../gpio/gpio.txt"
> +
> +- ti,boost-freq-hz:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: switch-frequency of the boost converter, must be either:
> +		    500000 or 1000000
> +
> +- ti,boost-ovp-mv:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: over-voltage protection limit, in mV. Must be one of:
> +		    16000, 24000, 32000 or 40000
> +
> +- #address-cells:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: must be 1
> +
> +- #size-cells:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: must be 0
> +
> += ALS SUBNODE
> +The ambient light sensor subnode carrying the light sensor related properties.
> +
> +- compatible:
> +	Usage: required
> +	Value type: <stringlist>
> +	Definition: must be:
> +		    "ti,lm3533-als"
> +
> +- ti,als-resistance-ohm:
> +	Usage: required (unless ti,pwm-mode is specified)
> +	Value type: <u32>
> +	Definition: specifies the resistor value (R_als), in Ohm. Valid values
> +		    ranges from 200000 to 1574 Ohm.
> +
> +- ti,pwm-mode:
> +	Usage: optional
> +	Value type: <empty>
> +	Definition: specifies, if present, that the als should operate in PWM
> +		    mode - rather than analog mode
> +
> += BACKLIGHT NODES
> +Backlight subnodes carrying the backlight related properties.
> +
> +- compatible:
> +	Usage: required
> +	Value type: <stringlist>
> +	Definition: must be:
> +		    "ti,lm3533-backlight"
> +
> +- reg:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: specifies which of the two backlights this node corresponds
> +		    to
> +
> +- default-brightness:
> +	Usage: optional
> +	Value type: <32>
> +	Definition: specifies the default brightness for the backlight, in
> +		    units of brightness [0-255]
> +
> +- label:
> +	Usage: required
> +	Value type: <string>
> +	Definition: specifies a name of this backlight
> +
> +- led-max-microamp:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: specifies the max current for this backlight, in uA, as
> +		    described in "../leds/common.txt"
> +
> +- ti,pwm-zones:
> +	Usage: optional
> +	Value type: <u32 list>
> +	Definition: lists the ALS zones to be PWM controlled for this backlight,
> +		    the values in the list are in the range [0 - 4]
> +
> += LED NODES
> +LED subnodes carrying the LED related properties.
> +
> +- compatible:
> +	Usage: required
> +	Value type: <stringlist>
> +	Definition: must be:
> +		    "ti,lm3533-led"
> +
> +- reg:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: specifies which of the four LEDs this node corresponds to
> +
> +- linux,default-trigger:
> +	Usage: optional
> +	Value type: <string>
> +	Definition: specifies the default trigger for the LED, as described in
> +		    "../leds/common.txt"
> +
> +- label:
> +	Usage: required
> +	Value type: <string>
> +	Definition: specifies a name of this LED, as described in
> +		    "../leds/common.txt"
> +
> +- led-max-microamp:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: specifies the max current for this LED, in uA, as described
> +		    in "../leds/common.txt"
> +
> +- ti,pwm-zones:
> +	Usage: optional
> +	Value type: <u32 list>
> +	Definition: lists the ALS zones to be PWM controlled for this LED, the
> +		    values in the list are in the range [0 - 4]
> +
> += EXAMPLE
> +
> +i2c@12460000 {
> +	compatible = "qcom,i2c-qup-v1.1.1";
> +	...
> +
> +	lm3533@36 {
> +		compatible = "ti,lm3533";
> +		reg = <0x36>;
> +
> +		als-supply = <&pm8921_l11>;
> +		hwen-gpios = <&pm8921_gpio 26 GPIO_ACTIVE_HIGH>;
> +
> +		ti,boost-freq-hz = <500000>;
> +		ti,boost-ovp-mv = <24000>;
> +
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		als {
> +			compatible = "ti,lm3533-als";
> +			ti,als-resistance-ohm = <200000>;
> +		};
> +
> +		backlight@0 {
> +			compatible = "ti,lm3533-backlight";
> +			reg = <0>;
> +			label = "backlight";
> +
> +			led-max-microamp = <20200>;
> +		};
> +
> +		led@0 {
> +			compatible = "ti,lm3533-led";
> +			reg = <0>;
> +			label = "red";
> +
> +			led-max-microamp = <5000>;
> +		};
> +
> +		led@1 {
> +			compatible = "ti,lm3533-led";
> +			reg = <1>;
> +			label = "green";
> +
> +			led-max-microamp = <5000>;
> +		};
> +
> +		led@2 {
> +			compatible = "ti,lm3533-led";
> +			reg = <2>;
> +			label = "blue";
> +
> +			led-max-microamp = <5000>;
> +		};
> +	};
> +

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web