Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1544126 > unrolled thread

[PATCH v6 5/6] Documentation: bindings: add documentation for ir-spi device driver

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v6 5/6] Documentation: bindings: add documentation for ir-spi  device driver Andi Shyti <andi.shyti@samsung.com> - 2016-12-18 12:20 +0100
    Re: [PATCH v6 5/6] Documentation: bindings: add documentation for  ir-spi device driver Rob Herring <robh@kernel.org> - 2016-12-22 17:50 +0100

#1544126 — [PATCH v6 5/6] Documentation: bindings: add documentation for ir-spi device driver

Document the ir-spi driver's binding which is a IR led driven
through the SPI line.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Reviewed-by: Sean Young <sean@mess.org>
---
 .../devicetree/bindings/leds/irled/spi-ir-led.txt  | 29 ++++++++++++++++++++++
 1 file changed, 29 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt

diff --git a/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt b/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt
new file mode 100644
index 000000000000..896b6997cf30
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt
@@ -0,0 +1,29 @@
+Device tree bindings for IR LED connected through SPI bus which is used as
+remote controller.
+
+The IR LED switch is connected to the MOSI line of the SPI device and the data
+are delivered thourgh that.
+
+Required properties:
+	- compatible: should be "ir-spi-led".
+
+Optional properties:
+	- duty-cycle: 8 bit balue that represents the percentage of one period
+	  in which the signal is active.  It can be 50, 60, 70, 75, 80 or 90.
+	- led-active-low: boolean value that specifies whether the output is
+	  negated with a NOT gate.
+	- power-supply: specifies the power source. It can either be a regulator
+	  or a gpio which enables a regulator, i.e. a regulator-fixed as
+	  described in
+	  Documentation/devicetree/bindings/regulator/fixed-regulator.txt
+
+Example:
+
+	irled@0 {
+		compatible = "ir-spi-led";
+		reg = <0x0>;
+		spi-max-frequency = <5000000>;
+		power-supply = <&vdd_led>;
+		led-active-low;
+		duty-cycle = /bits/ 8 <60>;
+	};
-- 
2.11.0

[toc] | [next] | [standalone]

#1546482 — Re: [PATCH v6 5/6] Documentation: bindings: add documentation for ir-spi device driver

On Sun, Dec 18, 2016 at 08:11:37PM +0900, Andi Shyti wrote:
> Document the ir-spi driver's binding which is a IR led driven
> through the SPI line.
> 
> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
> Reviewed-by: Sean Young <sean@mess.org>
> ---
>  .../devicetree/bindings/leds/irled/spi-ir-led.txt  | 29 ++++++++++++++++++++++
>  1 file changed, 29 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt

Acked-by: Rob Herring <robh@kernel.org>

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web