Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1545613 > unrolled thread
| Started by | fu.wei@linaro.org |
|---|---|
| First post | 2016-12-21 07:50 +0100 |
| Last post | 2016-12-21 07:50 +0100 |
| Articles | 4 — 1 participant |
Back to article view | Back to linux.kernel
[PATCH v19 00/15] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer fu.wei@linaro.org - 2016-12-21 07:50 +0100
[PATCH v19 09/15] clocksource/drivers/arm_arch_timer: Introduce some new structs to prepare for GTDT fu.wei@linaro.org - 2016-12-21 07:50 +0100
[PATCH v19 04/15] clocksource/drivers/arm_arch_timer: rename some enums and defines. fu.wei@linaro.org - 2016-12-21 07:50 +0100
[PATCH v19 06/15] clocksource/drivers/arm_arch_timer: Rework counter frequency detection. fu.wei@linaro.org - 2016-12-21 07:50 +0100
| From | fu.wei@linaro.org |
|---|---|
| Date | 2016-12-21 07:50 +0100 |
| Subject | [PATCH v19 00/15] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer |
| Message-ID | <sQISR-8ka-3@gated-at.bofh.it> |
From: Fu Wei <fu.wei@linaro.org>
This patchset:
(1)Preparation for adding GTDT support in arm_arch_timer:
1. Move some enums and marcos to header file;
2. Add a new enum for spi type;
3. Improve printk relevant code;
4. Rename some enums and defines;
5. Rework PPI determination;
6. Rework counter frequency detection;
7. Refactor arch_timer_needs_probing, move it into DT init call
8. Introduce some new structs and refactor the MMIO timer init code
for reusing some common code.
(2)Introduce ACPI GTDT parser: drivers/acpi/arm64/acpi_gtdt.c
Parse all kinds of timer in GTDT table of ACPI:arch timer,
memory-mapped timer and SBSA Generic Watchdog timer.
This driver can help to simplify all the relevant timer drivers,
and separate all the ACPI GTDT knowledge from them.
(3)Simplify ACPI code for arm_arch_timer
(4)Add GTDT support for ARM memory-mapped timer.
This patchset has been tested on the following platforms with ACPI enabled:
(1)ARM Foundation v8 model
Changelog:
v19: https://lkml.org/lkml/2016/12/21/
Fix a '\n' missing in a error message in arch_timer_mem_init.
Add "request_mem_region" for ioremapping cntbase, according to
f947ee1 clocksource/drivers/arm_arch_timer: Map frame with of_io_request_and_map()
Rebase to 4.9.0-gfb779ff
v18: https://lkml.org/lkml/2016/12/8/446
Fix 8/15 patch problem of "int ret;" in arch_timer_acpi_init.
Rebase to 4.9.0-rc8-g9269898
v17: https://lkml.org/lkml/2016/11/25/140
Take out some cleanups from 4/15.
Merge 5/15 and 6/15, improve PPI determination code,
improve commit message.
Rework counter frequency detection.
Move arch_timer_needs_of_probing into DT init call.
Move Platform Timer scan loop back to timer init call to avoid allocating
and free memory.
Improve all the exported functions' comment.
v16: https://lkml.org/lkml/2016/11/16/268
Fix patchset problem about static enum ppi_nr of 01/13 in v15.
Refactor arch_timer_detect_rate.
Refactor arch_timer_needs_probing.
v15: https://lkml.org/lkml/2016/11/15/366
Re-order patches
Add arm_arch_timer refactoring patches to prepare for GTDT:
1. rename some enums and defines, and some cleanups
2. separate out arch_timer_uses_ppi init code and fix a potential bug
3. Improve some new structs, refactor the timer init code.
Since the some structs have been changed, GTDT parser for memory-mapped
timer and SBSA Generic Watchdog timer have been update.
v14: https://lkml.org/lkml/2016/9/28/573
Separate memory-mapped timer GTDT support into two patches
1. Refactor the timer init code to prepare for GTDT
2. Add GTDT support for memory-mapped timer
v13: http://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1231717.html
Improve arm_arch_timer code for memory-mapped
timer GTDT support, refactor original memory-mapped timer
dt support for reusing some common code.
v12: https://lkml.org/lkml/2016/9/13/250
Rebase to latest Linux 4.8-rc6
Delete the confusing "skipping" in the error message.
V11: https://lkml.org/lkml/2016/9/6/354
Rebase to latest Linux 4.8-rc5
Delete typedef (suggested by checkpatch.pl)
V10: https://lkml.org/lkml/2016/7/26/215
Drop the "readq" patch.
Rebase to latest Linux 4.7.
V9: https://lkml.org/lkml/2016/7/25/345
Improve pr_err message in acpi gtdt driver.
Update Commit message for 7/9
shorten the irq mapping function name
Improve GTDT driver for memory-mapped timer
v8: https://lkml.org/lkml/2016/7/19/660
Improve "pr_fmt(fmt)" definition: add "ACPI" in front of "GTDT",
and also improve printk message.
Simplify is_timer_block and is_watchdog.
Merge acpi_gtdt_desc_init and gtdt_arch_timer_init into acpi_gtdt_init();
Delete __init in include/linux/acpi.h for GTDT API
Make ARM64 select GTDT.
Delete "#include <linux/module.h>" from acpi_gtdt.c
Simplify GT block parse code.
v7: https://lkml.org/lkml/2016/7/13/769
Move the GTDT driver to drivers/acpi/arm64
Add add the ARM64-specific ACPI Support maintainers in MAINTAINERS
Merge 3 patches of GTDT parser driver.
Fix the for_each_platform_timer bug.
v6: https://lkml.org/lkml/2016/6/29/580
split the GTDT driver to 4 parts: basic, arch_timer, memory-mapped timer,
and SBSA Generic Watchdog timer
Improve driver by suggestions and example code from Daniel Lezcano
v5: https://lkml.org/lkml/2016/5/24/356
Sorting out all patches, simplify the API of GTDT driver:
GTDT driver just fills the data struct for arm_arch_timer driver.
v4: https://lists.linaro.org/pipermail/linaro-acpi/2016-March/006667.html
Delete the kvm relevant patches
Separate two patches for sorting out the code for arm_arch_timer.
Improve irq info export code to allow missing irq info in GTDT table.
v3: https://lkml.org/lkml/2016/2/1/658
Improve GTDT driver code:
(1)improve pr_* by defining pr_fmt(fmt)
(2)simplify gtdt_sbsa_gwdt_init
(3)improve gtdt_arch_timer_data_init, if table is NULL, it will try
to get GTDT table.
Move enum ppi_nr to arm_arch_timer.h, and add enum spi_nr.
Add arm_arch_timer get ppi from DT and GTDT support for kvm.
v2: https://lkml.org/lkml/2015/12/2/10
Rebase to latest kernel version(4.4-rc3).
Fix the bug about the config problem,
use CONFIG_ACPI_GTDT instead of CONFIG_ACPI in arm_arch_timer.c
v1: The first upstreaming version: https://lkml.org/lkml/2015/10/28/553
Fu Wei (15):
clocksource/drivers/arm_arch_timer: Move enums and defines to header
file
clocksource/drivers/arm_arch_timer: Add a new enum for spi type
clocksource/drivers/arm_arch_timer: Improve printk relevant code
clocksource/drivers/arm_arch_timer: rename some enums and defines.
clocksource/drivers/arm_arch_timer: rework PPI determination
clocksource/drivers/arm_arch_timer: Rework counter frequency
detection.
clocksource/drivers/arm_arch_timer: Refactor arch_timer_needs_probing
clocksource/drivers/arm_arch_timer: move arch_timer_needs_of_probing
into DT init call
clocksource/drivers/arm_arch_timer: Introduce some new structs to
prepare for GTDT
clocksource/drivers/arm_arch_timer: Refactor the timer init code to
prepare for GTDT
acpi/arm64: Add GTDT table parse driver
clocksource/drivers/arm_arch_timer: Simplify ACPI support code.
acpi/arm64: Add memory-mapped timer support in GTDT driver
clocksource/drivers/arm_arch_timer: Add GTDT support for memory-mapped
timer
acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver
arch/arm64/Kconfig | 1 +
drivers/acpi/arm64/Kconfig | 3 +
drivers/acpi/arm64/Makefile | 1 +
drivers/acpi/arm64/gtdt.c | 374 +++++++++++++++++++++++++++
drivers/clocksource/arm_arch_timer.c | 483 ++++++++++++++++++++---------------
drivers/watchdog/Kconfig | 1 +
include/clocksource/arm_arch_timer.h | 45 +++-
include/linux/acpi.h | 7 +
virt/kvm/arm/hyp/timer-sr.c | 6 +-
9 files changed, 712 insertions(+), 209 deletions(-)
create mode 100644 drivers/acpi/arm64/gtdt.c
--
2.9.3
[toc] | [next] | [standalone]
| From | fu.wei@linaro.org |
|---|---|
| Date | 2016-12-21 07:50 +0100 |
| Subject | [PATCH v19 09/15] clocksource/drivers/arm_arch_timer: Introduce some new structs to prepare for GTDT |
| Message-ID | <sQISS-8ka-27@gated-at.bofh.it> |
| In reply to | #1545613 |
From: Fu Wei <fu.wei@linaro.org>
The patch introduce two new structs: arch_timer_mem, arch_timer_mem_frame.
And also introduce a new define: ARCH_TIMER_MEM_MAX_FRAMES
These will be used for refactoring the memory-mapped timer init code to
prepare for GTDT
Signed-off-by: Fu Wei <fu.wei@linaro.org>
---
include/clocksource/arm_arch_timer.h | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h
index 48376a5..3403247 100644
--- a/include/clocksource/arm_arch_timer.h
+++ b/include/clocksource/arm_arch_timer.h
@@ -57,6 +57,8 @@ enum arch_timer_spi_nr {
#define ARCH_TIMER_MEM_PHYS_ACCESS 2
#define ARCH_TIMER_MEM_VIRT_ACCESS 3
+#define ARCH_TIMER_MEM_MAX_FRAMES 8
+
#define ARCH_TIMER_USR_PCT_ACCESS_EN (1 << 0) /* physical counter */
#define ARCH_TIMER_USR_VCT_ACCESS_EN (1 << 1) /* virtual counter */
#define ARCH_TIMER_VIRT_EVT_EN (1 << 2)
@@ -72,6 +74,21 @@ struct arch_timer_kvm_info {
int virtual_irq;
};
+struct arch_timer_mem_frame {
+ int frame_nr;
+ phys_addr_t cntbase;
+ size_t size;
+ int phys_irq;
+ int virt_irq;
+};
+
+struct arch_timer_mem {
+ phys_addr_t cntctlbase;
+ size_t size;
+ int num_frames;
+ struct arch_timer_mem_frame frame[ARCH_TIMER_MEM_MAX_FRAMES];
+};
+
#ifdef CONFIG_ARM_ARCH_TIMER
extern u32 arch_timer_get_rate(void);
--
2.9.3
[toc] | [prev] | [next] | [standalone]
| From | fu.wei@linaro.org |
|---|---|
| Date | 2016-12-21 07:50 +0100 |
| Subject | [PATCH v19 04/15] clocksource/drivers/arm_arch_timer: rename some enums and defines. |
| Message-ID | <sQISS-8ka-35@gated-at.bofh.it> |
| In reply to | #1545613 |
From: Fu Wei <fu.wei@linaro.org>
Rename some enums and defines, to unify the format of enums and defines
in arm_arch_timer.h, also update all the users of these enums and defines:
drivers/clocksource/arm_arch_timer.c
virt/kvm/arm/hyp/timer-sr.c
No functional change.
Signed-off-by: Fu Wei <fu.wei@linaro.org>
Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
---
drivers/clocksource/arm_arch_timer.c | 111 ++++++++++++++++++-----------------
include/clocksource/arm_arch_timer.h | 24 ++++----
virt/kvm/arm/hyp/timer-sr.c | 6 +-
3 files changed, 73 insertions(+), 68 deletions(-)
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 7203f95..c7b4e50 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -66,11 +66,11 @@ struct arch_timer {
#define to_arch_timer(e) container_of(e, struct arch_timer, evt)
static u32 arch_timer_rate;
-static int arch_timer_ppi[MAX_TIMER_PPI];
+static int arch_timer_ppi[ARCH_TIMER_MAX_TIMER_PPI];
static struct clock_event_device __percpu *arch_timer_evt;
-static enum arch_timer_ppi_nr arch_timer_uses_ppi = VIRT_PPI;
+static enum arch_timer_ppi_nr arch_timer_uses_ppi = ARCH_TIMER_VIRT_PPI;
static bool arch_timer_c3stop;
static bool arch_timer_mem_use_virtual;
static bool arch_counter_suspend_stop;
@@ -341,7 +341,7 @@ static void fsl_a008585_set_sne(struct clock_event_device *clk)
if (!static_branch_unlikely(&arch_timer_read_ool_enabled))
return;
- if (arch_timer_uses_ppi == VIRT_PPI)
+ if (arch_timer_uses_ppi == ARCH_TIMER_VIRT_PPI)
clk->set_next_event = fsl_a008585_set_next_event_virt;
else
clk->set_next_event = fsl_a008585_set_next_event_phys;
@@ -353,7 +353,7 @@ static void __arch_timer_setup(unsigned type,
{
clk->features = CLOCK_EVT_FEAT_ONESHOT;
- if (type == ARCH_CP15_TIMER) {
+ if (type == ARCH_TIMER_TYPE_CP15) {
if (arch_timer_c3stop)
clk->features |= CLOCK_EVT_FEAT_C3STOP;
clk->name = "arch_sys_timer";
@@ -361,14 +361,14 @@ static void __arch_timer_setup(unsigned type,
clk->cpumask = cpumask_of(smp_processor_id());
clk->irq = arch_timer_ppi[arch_timer_uses_ppi];
switch (arch_timer_uses_ppi) {
- case VIRT_PPI:
+ case ARCH_TIMER_VIRT_PPI:
clk->set_state_shutdown = arch_timer_shutdown_virt;
clk->set_state_oneshot_stopped = arch_timer_shutdown_virt;
clk->set_next_event = arch_timer_set_next_event_virt;
break;
- case PHYS_SECURE_PPI:
- case PHYS_NONSECURE_PPI:
- case HYP_PPI:
+ case ARCH_TIMER_PHYS_SECURE_PPI:
+ case ARCH_TIMER_PHYS_NONSECURE_PPI:
+ case ARCH_TIMER_HYP_PPI:
clk->set_state_shutdown = arch_timer_shutdown_phys;
clk->set_state_oneshot_stopped = arch_timer_shutdown_phys;
clk->set_next_event = arch_timer_set_next_event_phys;
@@ -448,8 +448,8 @@ static void arch_counter_set_user_access(void)
static bool arch_timer_has_nonsecure_ppi(void)
{
- return (arch_timer_uses_ppi == PHYS_SECURE_PPI &&
- arch_timer_ppi[PHYS_NONSECURE_PPI]);
+ return (arch_timer_uses_ppi == ARCH_TIMER_PHYS_SECURE_PPI &&
+ arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI]);
}
static u32 check_ppi_trigger(int irq)
@@ -470,14 +470,15 @@ static int arch_timer_starting_cpu(unsigned int cpu)
struct clock_event_device *clk = this_cpu_ptr(arch_timer_evt);
u32 flags;
- __arch_timer_setup(ARCH_CP15_TIMER, clk);
+ __arch_timer_setup(ARCH_TIMER_TYPE_CP15, clk);
flags = check_ppi_trigger(arch_timer_ppi[arch_timer_uses_ppi]);
enable_percpu_irq(arch_timer_ppi[arch_timer_uses_ppi], flags);
if (arch_timer_has_nonsecure_ppi()) {
- flags = check_ppi_trigger(arch_timer_ppi[PHYS_NONSECURE_PPI]);
- enable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI], flags);
+ flags = check_ppi_trigger(arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI]);
+ enable_percpu_irq(arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI],
+ flags);
}
arch_counter_set_user_access();
@@ -514,16 +515,17 @@ arch_timer_detect_rate(void __iomem *cntbase, struct device_node *np)
static void arch_timer_banner(unsigned type)
{
pr_info("%s%s%s timer(s) running at %lu.%02luMHz (%s%s%s).\n",
- type & ARCH_CP15_TIMER ? "cp15" : "",
- type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ? " and " : "",
- type & ARCH_MEM_TIMER ? "mmio" : "",
+ type & ARCH_TIMER_TYPE_CP15 ? "cp15" : "",
+ type == (ARCH_TIMER_TYPE_CP15 | ARCH_TIMER_TYPE_MEM) ?
+ " and " : "",
+ type & ARCH_TIMER_TYPE_MEM ? "mmio" : "",
(unsigned long)arch_timer_rate / 1000000,
(unsigned long)(arch_timer_rate / 10000) % 100,
- type & ARCH_CP15_TIMER ?
- (arch_timer_uses_ppi == VIRT_PPI) ? "virt" : "phys" :
+ type & ARCH_TIMER_TYPE_CP15 ?
+ (arch_timer_uses_ppi == ARCH_TIMER_VIRT_PPI) ? "virt" : "phys" :
"",
- type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ? "/" : "",
- type & ARCH_MEM_TIMER ?
+ type == (ARCH_TIMER_TYPE_CP15 | ARCH_TIMER_TYPE_MEM) ? "/" : "",
+ type & ARCH_TIMER_TYPE_MEM ?
arch_timer_mem_use_virtual ? "virt" : "phys" :
"");
}
@@ -589,8 +591,9 @@ static void __init arch_counter_register(unsigned type)
u64 start_count;
/* Register the CP15 based counter if we have one */
- if (type & ARCH_CP15_TIMER) {
- if (IS_ENABLED(CONFIG_ARM64) || arch_timer_uses_ppi == VIRT_PPI)
+ if (type & ARCH_TIMER_TYPE_CP15) {
+ if (IS_ENABLED(CONFIG_ARM64) ||
+ arch_timer_uses_ppi == ARCH_TIMER_VIRT_PPI)
arch_timer_read_counter = arch_counter_get_cntvct;
else
arch_timer_read_counter = arch_counter_get_cntpct;
@@ -628,7 +631,7 @@ static void arch_timer_stop(struct clock_event_device *clk)
disable_percpu_irq(arch_timer_ppi[arch_timer_uses_ppi]);
if (arch_timer_has_nonsecure_ppi())
- disable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI]);
+ disable_percpu_irq(arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI]);
clk->set_state_shutdown(clk);
}
@@ -691,24 +694,24 @@ static int __init arch_timer_register(void)
ppi = arch_timer_ppi[arch_timer_uses_ppi];
switch (arch_timer_uses_ppi) {
- case VIRT_PPI:
+ case ARCH_TIMER_VIRT_PPI:
err = request_percpu_irq(ppi, arch_timer_handler_virt,
"arch_timer", arch_timer_evt);
break;
- case PHYS_SECURE_PPI:
- case PHYS_NONSECURE_PPI:
+ case ARCH_TIMER_PHYS_SECURE_PPI:
+ case ARCH_TIMER_PHYS_NONSECURE_PPI:
err = request_percpu_irq(ppi, arch_timer_handler_phys,
"arch_timer", arch_timer_evt);
- if (!err && arch_timer_ppi[PHYS_NONSECURE_PPI]) {
- ppi = arch_timer_ppi[PHYS_NONSECURE_PPI];
+ if (!err && arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI]) {
+ ppi = arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI];
err = request_percpu_irq(ppi, arch_timer_handler_phys,
"arch_timer", arch_timer_evt);
if (err)
- free_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI],
+ free_percpu_irq(arch_timer_ppi[ARCH_TIMER_PHYS_SECURE_PPI],
arch_timer_evt);
}
break;
- case HYP_PPI:
+ case ARCH_TIMER_HYP_PPI:
err = request_percpu_irq(ppi, arch_timer_handler_phys,
"arch_timer", arch_timer_evt);
break;
@@ -740,7 +743,7 @@ static int __init arch_timer_register(void)
out_unreg_notify:
free_percpu_irq(arch_timer_ppi[arch_timer_uses_ppi], arch_timer_evt);
if (arch_timer_has_nonsecure_ppi())
- free_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI],
+ free_percpu_irq(arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI],
arch_timer_evt);
out_free:
@@ -761,7 +764,7 @@ static int __init arch_timer_mem_register(void __iomem *base, unsigned int irq)
t->base = base;
t->evt.irq = irq;
- __arch_timer_setup(ARCH_MEM_TIMER, &t->evt);
+ __arch_timer_setup(ARCH_TIMER_TYPE_MEM, &t->evt);
if (arch_timer_mem_use_virtual)
func = arch_timer_handler_virt_mem;
@@ -804,13 +807,15 @@ arch_timer_needs_probing(int type, const struct of_device_id *matches)
static int __init arch_timer_common_init(void)
{
- unsigned mask = ARCH_CP15_TIMER | ARCH_MEM_TIMER;
+ unsigned mask = ARCH_TIMER_TYPE_CP15 | ARCH_TIMER_TYPE_MEM;
/* Wait until both nodes are probed if we have two timers */
if ((arch_timers_present & mask) != mask) {
- if (arch_timer_needs_probing(ARCH_MEM_TIMER, arch_timer_mem_of_match))
+ if (arch_timer_needs_probing(ARCH_TIMER_TYPE_MEM,
+ arch_timer_mem_of_match))
return 0;
- if (arch_timer_needs_probing(ARCH_CP15_TIMER, arch_timer_of_match))
+ if (arch_timer_needs_probing(ARCH_TIMER_TYPE_CP15,
+ arch_timer_of_match))
return 0;
}
@@ -835,16 +840,16 @@ static int __init arch_timer_init(void)
* their CNTHP_*_EL2 counterparts, and use a different PPI
* number.
*/
- if (is_hyp_mode_available() || !arch_timer_ppi[VIRT_PPI]) {
+ if (is_hyp_mode_available() || !arch_timer_ppi[ARCH_TIMER_VIRT_PPI]) {
bool has_ppi;
if (is_kernel_in_hyp_mode()) {
- arch_timer_uses_ppi = HYP_PPI;
- has_ppi = !!arch_timer_ppi[HYP_PPI];
+ arch_timer_uses_ppi = ARCH_TIMER_HYP_PPI;
+ has_ppi = !!arch_timer_ppi[ARCH_TIMER_HYP_PPI];
} else {
- arch_timer_uses_ppi = PHYS_SECURE_PPI;
- has_ppi = (!!arch_timer_ppi[PHYS_SECURE_PPI] ||
- !!arch_timer_ppi[PHYS_NONSECURE_PPI]);
+ arch_timer_uses_ppi = ARCH_TIMER_PHYS_SECURE_PPI;
+ has_ppi = (!!arch_timer_ppi[ARCH_TIMER_PHYS_SECURE_PPI] ||
+ !!arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI]);
}
if (!has_ppi) {
@@ -861,7 +866,7 @@ static int __init arch_timer_init(void)
if (ret)
return ret;
- arch_timer_kvm_info.virtual_irq = arch_timer_ppi[VIRT_PPI];
+ arch_timer_kvm_info.virtual_irq = arch_timer_ppi[ARCH_TIMER_VIRT_PPI];
return 0;
}
@@ -870,13 +875,13 @@ static int __init arch_timer_of_init(struct device_node *np)
{
int i;
- if (arch_timers_present & ARCH_CP15_TIMER) {
+ if (arch_timers_present & ARCH_TIMER_TYPE_CP15) {
pr_warn("multiple nodes in dt, skipping\n");
return 0;
}
- arch_timers_present |= ARCH_CP15_TIMER;
- for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++)
+ arch_timers_present |= ARCH_TIMER_TYPE_CP15;
+ for (i = ARCH_TIMER_PHYS_SECURE_PPI; i < ARCH_TIMER_MAX_TIMER_PPI; i++)
arch_timer_ppi[i] = irq_of_parse_and_map(np, i);
arch_timer_detect_rate(NULL, np);
@@ -898,7 +903,7 @@ static int __init arch_timer_of_init(struct device_node *np)
*/
if (IS_ENABLED(CONFIG_ARM) &&
of_property_read_bool(np, "arm,cpu-registers-not-fw-configured"))
- arch_timer_uses_ppi = PHYS_SECURE_PPI;
+ arch_timer_uses_ppi = ARCH_TIMER_PHYS_SECURE_PPI;
/* On some systems, the counter stops ticking when in suspend. */
arch_counter_suspend_stop = of_property_read_bool(np,
@@ -916,7 +921,7 @@ static int __init arch_timer_mem_init(struct device_node *np)
unsigned int irq, ret = -EINVAL;
u32 cnttidr;
- arch_timers_present |= ARCH_MEM_TIMER;
+ arch_timers_present |= ARCH_TIMER_TYPE_MEM;
cntctlbase = of_iomap(np, 0);
if (!cntctlbase) {
pr_err("Can't find CNTCTLBase\n");
@@ -1016,28 +1021,28 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table)
{
struct acpi_table_gtdt *gtdt;
- if (arch_timers_present & ARCH_CP15_TIMER) {
+ if (arch_timers_present & ARCH_TIMER_TYPE_CP15) {
pr_warn("already initialized, skipping\n");
return -EINVAL;
}
gtdt = container_of(table, struct acpi_table_gtdt, header);
- arch_timers_present |= ARCH_CP15_TIMER;
+ arch_timers_present |= ARCH_TIMER_TYPE_CP15;
- arch_timer_ppi[PHYS_SECURE_PPI] =
+ arch_timer_ppi[ARCH_TIMER_PHYS_SECURE_PPI] =
map_generic_timer_interrupt(gtdt->secure_el1_interrupt,
gtdt->secure_el1_flags);
- arch_timer_ppi[PHYS_NONSECURE_PPI] =
+ arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI] =
map_generic_timer_interrupt(gtdt->non_secure_el1_interrupt,
gtdt->non_secure_el1_flags);
- arch_timer_ppi[VIRT_PPI] =
+ arch_timer_ppi[ARCH_TIMER_VIRT_PPI] =
map_generic_timer_interrupt(gtdt->virtual_timer_interrupt,
gtdt->virtual_timer_flags);
- arch_timer_ppi[HYP_PPI] =
+ arch_timer_ppi[ARCH_TIMER_HYP_PPI] =
map_generic_timer_interrupt(gtdt->non_secure_el2_interrupt,
gtdt->non_secure_el2_flags);
diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h
index d23c381..48376a5 100644
--- a/include/clocksource/arm_arch_timer.h
+++ b/include/clocksource/arm_arch_timer.h
@@ -20,18 +20,18 @@
#include <linux/timecounter.h>
#include <linux/types.h>
-#define ARCH_CP15_TIMER BIT(0)
-#define ARCH_MEM_TIMER BIT(1)
+#define ARCH_TIMER_TYPE_CP15 BIT(0)
+#define ARCH_TIMER_TYPE_MEM BIT(1)
#define ARCH_TIMER_CTRL_ENABLE (1 << 0)
#define ARCH_TIMER_CTRL_IT_MASK (1 << 1)
#define ARCH_TIMER_CTRL_IT_STAT (1 << 2)
-#define CNTHCTL_EL1PCTEN (1 << 0)
-#define CNTHCTL_EL1PCEN (1 << 1)
-#define CNTHCTL_EVNTEN (1 << 2)
-#define CNTHCTL_EVNTDIR (1 << 3)
-#define CNTHCTL_EVNTI (0xF << 4)
+#define ARCH_TIMER_CNTHCTL_EL1PCTEN (1 << 0)
+#define ARCH_TIMER_CNTHCTL_EL1PCEN (1 << 1)
+#define ARCH_TIMER_CNTHCTL_EVNTEN (1 << 2)
+#define ARCH_TIMER_CNTHCTL_EVNTDIR (1 << 3)
+#define ARCH_TIMER_CNTHCTL_EVNTI (0xF << 4)
enum arch_timer_reg {
ARCH_TIMER_REG_CTRL,
@@ -39,11 +39,11 @@ enum arch_timer_reg {
};
enum arch_timer_ppi_nr {
- PHYS_SECURE_PPI,
- PHYS_NONSECURE_PPI,
- VIRT_PPI,
- HYP_PPI,
- MAX_TIMER_PPI
+ ARCH_TIMER_PHYS_SECURE_PPI,
+ ARCH_TIMER_PHYS_NONSECURE_PPI,
+ ARCH_TIMER_VIRT_PPI,
+ ARCH_TIMER_HYP_PPI,
+ ARCH_TIMER_MAX_TIMER_PPI
};
enum arch_timer_spi_nr {
diff --git a/virt/kvm/arm/hyp/timer-sr.c b/virt/kvm/arm/hyp/timer-sr.c
index 798866a..695b9d9 100644
--- a/virt/kvm/arm/hyp/timer-sr.c
+++ b/virt/kvm/arm/hyp/timer-sr.c
@@ -37,7 +37,7 @@ void __hyp_text __timer_save_state(struct kvm_vcpu *vcpu)
/* Allow physical timer/counter access for the host */
val = read_sysreg(cnthctl_el2);
- val |= CNTHCTL_EL1PCTEN | CNTHCTL_EL1PCEN;
+ val |= ARCH_TIMER_CNTHCTL_EL1PCTEN | ARCH_TIMER_CNTHCTL_EL1PCEN;
write_sysreg(val, cnthctl_el2);
/* Clear cntvoff for the host */
@@ -55,8 +55,8 @@ void __hyp_text __timer_restore_state(struct kvm_vcpu *vcpu)
* Physical counter access is allowed
*/
val = read_sysreg(cnthctl_el2);
- val &= ~CNTHCTL_EL1PCEN;
- val |= CNTHCTL_EL1PCTEN;
+ val &= ~ARCH_TIMER_CNTHCTL_EL1PCEN;
+ val |= ARCH_TIMER_CNTHCTL_EL1PCTEN;
write_sysreg(val, cnthctl_el2);
if (timer->enabled) {
--
2.9.3
[toc] | [prev] | [next] | [standalone]
| From | fu.wei@linaro.org |
|---|---|
| Date | 2016-12-21 07:50 +0100 |
| Subject | [PATCH v19 06/15] clocksource/drivers/arm_arch_timer: Rework counter frequency detection. |
| Message-ID | <sQISS-8ka-37@gated-at.bofh.it> |
| In reply to | #1545613 |
From: Fu Wei <fu.wei@linaro.org>
Currently, the counter frequency detection call(arch_timer_detect_rate)
combines all the ways to get counter frequency: device-tree property,
system coprocessor register, MMIO timer. But in the most of use cases,
we don't need all the ways to try:
For example, reading device-tree property will be needed only when
system boot with device-tree, getting frequency from MMIO timer register
will beneeded only when we init MMIO timer.
This patch separates paths to determine frequency:
Separate out device-tree code, keep them in device-tree init function.
Separate out the MMIO frequency and the sysreg frequency detection call,
and use the appropriate one for the counter.
Signed-off-by: Fu Wei <fu.wei@linaro.org>
Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
---
drivers/clocksource/arm_arch_timer.c | 49 +++++++++++++++++++++++-------------
1 file changed, 31 insertions(+), 18 deletions(-)
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index c7b4482..9a1f138 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -488,27 +488,31 @@ static int arch_timer_starting_cpu(unsigned int cpu)
return 0;
}
-static void
-arch_timer_detect_rate(void __iomem *cntbase, struct device_node *np)
+static void arch_timer_detect_rate(void)
{
- /* Who has more than one independent system counter? */
- if (arch_timer_rate)
- return;
+ /*
+ * Try to get the timer frequency from
+ * cntfrq_el0(system coprocessor register).
+ */
+ if (!arch_timer_rate)
+ arch_timer_rate = arch_timer_get_cntfrq();
+
+ /* Check the timer frequency. */
+ if (!arch_timer_rate)
+ pr_warn("frequency not available\n");
+}
+static void arch_timer_mem_detect_rate(void __iomem *cntbase)
+{
/*
- * Try to determine the frequency from the device tree or CNTFRQ,
- * if ACPI is enabled, get the frequency from CNTFRQ ONLY.
+ * Try to determine the frequency from
+ * CNTFRQ in memory-mapped timer.
*/
- if (!acpi_disabled ||
- of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) {
- if (cntbase)
- arch_timer_rate = readl_relaxed(cntbase + CNTFRQ);
- else
- arch_timer_rate = arch_timer_get_cntfrq();
- }
+ if (!arch_timer_rate)
+ arch_timer_rate = readl_relaxed(cntbase + CNTFRQ);
/* Check the timer frequency. */
- if (arch_timer_rate == 0)
+ if (!arch_timer_rate)
pr_warn("frequency not available\n");
}
@@ -886,7 +890,9 @@ static int __init arch_timer_of_init(struct device_node *np)
for (i = ARCH_TIMER_PHYS_SECURE_PPI; i < ARCH_TIMER_MAX_TIMER_PPI; i++)
arch_timer_ppi[i] = irq_of_parse_and_map(np, i);
- arch_timer_detect_rate(NULL, np);
+ if (!arch_timer_rate &&
+ of_property_read_u32(np, "clock-frequency", &arch_timer_rate))
+ arch_timer_detect_rate();
arch_timer_c3stop = !of_property_read_bool(np, "always-on");
@@ -994,7 +1000,14 @@ static int __init arch_timer_mem_init(struct device_node *np)
goto out;
}
- arch_timer_detect_rate(base, np);
+ /*
+ * Try to determine the frequency from the device tree,
+ * if fail, get the frequency from CNTFRQ.
+ */
+ if (!arch_timer_rate &&
+ of_property_read_u32(np, "clock-frequency", &arch_timer_rate))
+ arch_timer_mem_detect_rate(base);
+
ret = arch_timer_mem_register(base, irq);
if (ret)
goto out;
@@ -1056,7 +1069,7 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table)
gtdt->non_secure_el2_flags);
/* Get the frequency from CNTFRQ */
- arch_timer_detect_rate(NULL, NULL);
+ arch_timer_detect_rate();
arch_timer_uses_ppi = arch_timer_select_ppi();
if (!arch_timer_ppi[arch_timer_uses_ppi]) {
--
2.9.3
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web