Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1543375 > unrolled thread

wl1251 NVS calibration data format

Back to article view | Back to linux.kernel

Contents

  wl1251 NVS calibration data format Pali Rohár <pali.rohar@gmail.com> - 2016-12-16 12:10 +0100
    Re: wl1251 NVS calibration data format Pali Rohár <pali.rohar@gmail.com> - 2016-12-16 12:20 +0100
    Re: wl1251 NVS calibration data format Sebastian Reichel <sre@kernel.org> - 2016-12-17 10:40 +0100
      Re: wl1251 NVS calibration data format Pali Rohár <pali.rohar@gmail.com> - 2016-12-17 12:20 +0100
        Re: wl1251 NVS calibration data format Sebastian Reichel <sre@kernel.org> - 2016-12-17 13:10 +0100
          MAC address in wl1251 NVS data (Was: Re: wl1251 NVS calibration data format) Pali Rohár <pali.rohar@gmail.com> - 2016-12-17 14:20 +0100
        Re: wl1251 NVS calibration data format Pali Rohár <pali.rohar@gmail.com> - 2016-12-24 14:00 +0100

#1543375 — wl1251 NVS calibration data format

[Multipart message — attachments visible in raw view] — view raw

Hi! Do you know format of wl1251 NVS calibration data file?

I found that there is tool for changing NVS file for wl1271 and newer 
chips (so not for wl1251!) at: https://github.com/gxk/ti-utils

And wl1271 has in NVS data already place for MAC address. And in wlcore 
(for wl1271 and newer) there is really kernel code which is doing 
something with MAC address in NVS, see: 
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/drivers/net/wireless/ti/wlcore/boot.c#n352

So... I would like to know if in wl1251 NVS calibration file is also 
some place for MAC address or not.

Default wl1251 NVS calibration file is available in linux-firmware: 
https://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/tree/ti-connectivity/wl1251-nvs.bin

-- 
Pali Rohár
pali.rohar@gmail.com

[toc] | [next] | [standalone]

#1543387

[Multipart message — attachments visible in raw view] — view raw

Resending email to new Gery's address...

On Friday 16 December 2016 12:01:48 Pali Rohár wrote:
> Hi! Do you know format of wl1251 NVS calibration data file?
> 
> I found that there is tool for changing NVS file for wl1271 and newer 
> chips (so not for wl1251!) at: https://github.com/gxk/ti-utils
> 
> And wl1271 has in NVS data already place for MAC address. And in wlcore 
> (for wl1271 and newer) there is really kernel code which is doing 
> something with MAC address in NVS, see: 
> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/drivers/net/wireless/ti/wlcore/boot.c#n352

Also, there is parsing MAC address from NVS wl1271 data:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/drivers/net/wireless/ti/wlcore/main.c#n6009

> So... I would like to know if in wl1251 NVS calibration file is also 
> some place for MAC address or not.
> 
> Default wl1251 NVS calibration file is available in linux-firmware: 
> https://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/tree/ti-connectivity/wl1251-nvs.bin

-- 
Pali Rohár
pali.rohar@gmail.com

[toc] | [prev] | [next] | [standalone]

#1543947

[Multipart message — attachments visible in raw view] — view raw

Hi,

On Fri, Dec 16, 2016 at 12:01:48PM +0100, Pali Rohár wrote:
> Hi! Do you know format of wl1251 NVS calibration data file?
> 
> I found that there is tool for changing NVS file for wl1271 and newer 
> chips (so not for wl1251!) at: https://github.com/gxk/ti-utils
> 
> And wl1271 has in NVS data already place for MAC address. And in wlcore 
> (for wl1271 and newer) there is really kernel code which is doing 
> something with MAC address in NVS, see: 
> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/drivers/net/wireless/ti/wlcore/boot.c#n352
> 
> So... I would like to know if in wl1251 NVS calibration file is also 
> some place for MAC address or not.
> 
> Default wl1251 NVS calibration file is available in linux-firmware: 
> https://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/tree/ti-connectivity/wl1251-nvs.bin

Pandora people [0] have a description of the format at [1].

[0] https://pandorawiki.org/WiFi
[1] http://notaz.gp2x.de/misc/pnd/wl1251/nvs_map.txt

-- Sebastian

[toc] | [prev] | [next] | [standalone]

#1543955

[Multipart message — attachments visible in raw view] — view raw

On Saturday 17 December 2016 10:37:05 Sebastian Reichel wrote:
> Hi,
> 
> On Fri, Dec 16, 2016 at 12:01:48PM +0100, Pali Rohár wrote:
> > Hi! Do you know format of wl1251 NVS calibration data file?
> > 
> > I found that there is tool for changing NVS file for wl1271 and
> > newer chips (so not for wl1251!) at:
> > https://github.com/gxk/ti-utils
> > 
> > And wl1271 has in NVS data already place for MAC address. And in
> > wlcore (for wl1271 and newer) there is really kernel code which is
> > doing something with MAC address in NVS, see:
> > https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tre
> > e/drivers/net/wireless/ti/wlcore/boot.c#n352
> > 
> > So... I would like to know if in wl1251 NVS calibration file is
> > also some place for MAC address or not.
> > 
> > Default wl1251 NVS calibration file is available in linux-firmware:
> > https://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmwar
> > e.git/tree/ti-connectivity/wl1251-nvs.bin
> 
> Pandora people [0] have a description of the format at [1].
> 
> [0] https://pandorawiki.org/WiFi
> [1] http://notaz.gp2x.de/misc/pnd/wl1251/nvs_map.txt

Thank you very very much!

I tried to search for something, but I have not find anything.

In that description is something about STA mac address:

01a       6d           //STA_ADDR_L Register Address.  (STA MAC Address)
01b       54           //
01c       00           //STA_ADDR_L Register
01d       00           //
01e       32           //
01f       28           //
020       00           //STA_ADDR_H Register Data.

STA would be abbreviation for station and so it should be really set to 
mac address of that chip?

If yes, that could allow us to set permanent MAC address at time when 
loading & sending NVS calibration data... Exactly same as wl1271 and new 
drivers are working.

I will try to play with driver if it is really truth!

I already looked into original TI's multiplatform HAL driver for wl1251 
chip (big mess) and found there that there is wl1251 command to read mac 
address from chip. It could be done by this wl1251 function:

wl1251_cmd_interrogate(wl, DOT11_STATION_ID, mac, sizeof(*mac))

(same id as for setting permanent mac address, but opposite to read it)

-- 
Pali Rohár
pali.rohar@gmail.com

[toc] | [prev] | [next] | [standalone]

#1543962

[Multipart message — attachments visible in raw view] — view raw

Hi,

On Sat, Dec 17, 2016 at 12:14:50PM +0100, Pali Rohár wrote:
> On Saturday 17 December 2016 10:37:05 Sebastian Reichel wrote:
> > On Fri, Dec 16, 2016 at 12:01:48PM +0100, Pali Rohár wrote:
> > > Hi! Do you know format of wl1251 NVS calibration data file?
> > > 
> > > I found that there is tool for changing NVS file for wl1271 and
> > > newer chips (so not for wl1251!) at:
> > > https://github.com/gxk/ti-utils
> > > 
> > > And wl1271 has in NVS data already place for MAC address. And in
> > > wlcore (for wl1271 and newer) there is really kernel code which is
> > > doing something with MAC address in NVS, see:
> > > https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tre
> > > e/drivers/net/wireless/ti/wlcore/boot.c#n352
> > > 
> > > So... I would like to know if in wl1251 NVS calibration file is
> > > also some place for MAC address or not.
> > > 
> > > Default wl1251 NVS calibration file is available in linux-firmware:
> > > https://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmwar
> > > e.git/tree/ti-connectivity/wl1251-nvs.bin
> > 
> > Pandora people [0] have a description of the format at [1].
> > 
> > [0] https://pandorawiki.org/WiFi
> > [1] http://notaz.gp2x.de/misc/pnd/wl1251/nvs_map.txt
> 
> Thank you very very much!

You are welcome.

> I tried to search for something, but I have not find anything.
> In that description is something about STA mac address:
> 
> 01a       6d           //STA_ADDR_L Register Address.  (STA MAC Address)
> 01b       54           //
> 01c       00           //STA_ADDR_L Register
> 01d       00           //
> 01e       32           //
> 01f       28           //
> 020       00           //STA_ADDR_H Register Data.
> 
> STA would be abbreviation for station and so it should be really set to 
> mac address of that chip?

Yes, STA is a common abbreviation:

https://en.wikipedia.org/wiki/Station_(networking)

> If yes, that could allow us to set permanent MAC address at time when 
> loading & sending NVS calibration data... Exactly same as wl1271 and new 
> drivers are working.
> 
> I will try to play with driver if it is really truth!

Thanks for your work.

> I already looked into original TI's multiplatform HAL driver for wl1251 
> chip (big mess) and found there that there is wl1251 command to read mac 
> address from chip. It could be done by this wl1251 function:
> 
> wl1251_cmd_interrogate(wl, DOT11_STATION_ID, mac, sizeof(*mac))
> 
> (same id as for setting permanent mac address, but opposite to read it)

-- Sebastian

[toc] | [prev] | [next] | [standalone]

#1543969 — MAC address in wl1251 NVS data (Was: Re: wl1251 NVS calibration data format)

[Multipart message — attachments visible in raw view] — view raw

> On Sat, Dec 17, 2016 at 12:14:50PM +0100, Pali Rohár wrote:
> > > [1] http://notaz.gp2x.de/misc/pnd/wl1251/nvs_map.txt
> > In that description is something about STA mac address:
> > 

    019       02           //length

> > 01a       6d           //STA_ADDR_L Register Address.  (STA MAC
> > Address)
> > 01b       54           //
> > 01c       00           //STA_ADDR_L Register
> > 01d       00           //
> > 01e       32           //
> > 01f       28           //
> > 020       00           //STA_ADDR_H Register Data.

    021       08           //
    022       00           //
    023       00           //

So... above data means:

019 - number of words
01a - low bits of offset applied with mask 0xfe
01b - high bits of offset
01c-01f first word
020-023 second word

Interpreted as: at address offset 0x536c are written two words 
0x28320000 and 0x00000800

wl1271 driver has in linux/drivers/net/wireless/ti/wlcore/boot.c this:

	/* update current MAC address to NVS */
	nvs_ptr[11] = wl->addresses[0].addr[0];
	nvs_ptr[10] = wl->addresses[0].addr[1];
	nvs_ptr[6] = wl->addresses[0].addr[2];
	nvs_ptr[5] = wl->addresses[0].addr[3];
	nvs_ptr[4] = wl->addresses[0].addr[4];
	nvs_ptr[3] = wl->addresses[0].addr[5];

Looking at wl1271-nvs.bin file (which is "modified" in kernel by boot.c)

000: 01
001: 6d
002: 54
003: 00
004: 00
005: ef
006: be

Means: at address offset 0x536c is written one word 0xBEEF0000

007: 01
008: 71
009: 54
00a: ad
00b: de
00c: 00
00d: 00

Means: at address offset 0x5371 is written one word 0x0000DEAD

Above boot.c kernel code updates those data to MAC address, so at 
address offset 0x536c is written four low bytes of MAC address and to 
0x5371 are written remaining two bytes. So 00:00:DE:AD:BE:EF

So conclusion: address offset for wl1271 (where is written MAC address) 
is exactly same as for wl1251 which is marked in that documentation as 
STA_ADDR_L Register.

Btw, in our wl1251-nvs.bin found in Maemo rootfs, which is exactly same 
as in linux-firmware.git tree there are those data:

019: 02
01a: 6d
01b: 54
01c: 09
01d: 03
01e: 07
01f: 20
020: 00
021: 00
022: 00
023: 00

So hardcoded MAC address in wl1251-nvs.bin is: 00:00:20:07:03:09. Which 
is assigned to DIAB. Strange that it is not TI...

-- 
Pali Rohár
pali.rohar@gmail.com

[toc] | [prev] | [next] | [standalone]

#1547055

[Multipart message — attachments visible in raw view] — view raw

On Saturday 17 December 2016 12:14:50 Pali Rohár wrote:
> I will try to play with driver if it is really truth!
> 
> I already looked into original TI's multiplatform HAL driver for
> wl1251 chip (big mess) and found there that there is wl1251 command
> to read mac address from chip. It could be done by this wl1251
> function:
> 
> wl1251_cmd_interrogate(wl, DOT11_STATION_ID, mac, sizeof(*mac))
> 
> (same id as for setting permanent mac address, but opposite to read
> it)

Confirmed! Calling that function (before setting real linux mac address) 
returns MAC address 00:00:20:07:03:09.

Changing NVS data at position 0x1c-0x21 changes also what above function 
returns.

So really at position 0x1c-0x21 in NVS data is stored MAC address (in 
reverse order). Just default is some unknown 00:00:20:07:03:09.

So MAC address is really part of NVS data.

-- 
Pali Rohár
pali.rohar@gmail.com

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web