Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1535023 > unrolled thread

[PATCH v2 3/3] ARM: da850: fix da850_set_pll0rate()

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v2 3/3] ARM: da850: fix da850_set_pll0rate() Bartosz Golaszewski <bgolaszewski@baylibre.com> - 2016-12-02 16:40 +0100
    Re: [PATCH v2 3/3] ARM: da850: fix da850_set_pll0rate() Viresh Kumar <viresh.kumar@linaro.org> - 2016-12-05 04:40 +0100
    Re: [PATCH v2 3/3] ARM: da850: fix da850_set_pll0rate() Sekhar Nori <nsekhar@ti.com> - 2016-12-05 10:20 +0100
      Re: [PATCH v2 3/3] ARM: da850: fix da850_set_pll0rate() Bartosz Golaszewski <bgolaszewski@baylibre.com> - 2016-12-05 10:40 +0100

#1535023 — [PATCH v2 3/3] ARM: da850: fix da850_set_pll0rate()

This function is broken - its second argument is an index to the freq
table, not the requested clock rate in Hz. It leads to an oops when
called from clk_set_rate() since this argument isn't bounds checked
either.

Fix it by iterating over the array of supported frequencies and
selecting a one that matches or returning -EINVAL for unsupported
rates.

Also: update the davinci cpufreq driver. It's the only user of this
clock and currently it passes the cpufreq table index to
clk_set_rate(), which is confusing. Make it pass the requested clock
rate in Hz.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/da850.c     | 22 ++++++++++++++++++----
 drivers/cpufreq/davinci-cpufreq.c |  2 +-
 2 files changed, 19 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index a55101c..92e3303 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -1179,14 +1179,28 @@ static int da850_set_armrate(struct clk *clk, unsigned long index)
 	return clk_set_rate(pllclk, index);
 }
 
-static int da850_set_pll0rate(struct clk *clk, unsigned long index)
+static int da850_set_pll0rate(struct clk *clk, unsigned long rate)
 {
-	unsigned int prediv, mult, postdiv;
-	struct da850_opp *opp;
 	struct pll_data *pll = clk->pll_data;
+	struct cpufreq_frequency_table *freq;
+	unsigned int prediv, mult, postdiv;
+	struct da850_opp *opp = NULL;
 	int ret;
 
-	opp = (struct da850_opp *) cpufreq_info.freq_table[index].driver_data;
+	for (freq = da850_freq_table;
+	     freq->frequency != CPUFREQ_TABLE_END; freq++) {
+		/* requested_rate is in Hz, freq->frequency is in KHz */
+		unsigned long freq_rate = freq->frequency * 1000;
+
+		if (freq_rate == rate) {
+			opp = (struct da850_opp *)freq->driver_data;
+			break;
+		}
+	}
+
+	if (opp == NULL)
+		return -EINVAL;
+
 	prediv = opp->prediv;
 	mult = opp->mult;
 	postdiv = opp->postdiv;
diff --git a/drivers/cpufreq/davinci-cpufreq.c b/drivers/cpufreq/davinci-cpufreq.c
index b95a872..d54a27c 100644
--- a/drivers/cpufreq/davinci-cpufreq.c
+++ b/drivers/cpufreq/davinci-cpufreq.c
@@ -55,7 +55,7 @@ static int davinci_target(struct cpufreq_policy *policy, unsigned int idx)
 			return ret;
 	}
 
-	ret = clk_set_rate(armclk, idx);
+	ret = clk_set_rate(armclk, new_freq * 1000);
 	if (ret)
 		return ret;
 
-- 
2.9.3

[toc] | [next] | [standalone]

#1535788

Good to see you again Bartosz :)

On 02-12-16, 16:38, Bartosz Golaszewski wrote:
> This function is broken - its second argument is an index to the freq
> table, not the requested clock rate in Hz. It leads to an oops when
> called from clk_set_rate() since this argument isn't bounds checked
> either.
> 
> Fix it by iterating over the array of supported frequencies and
> selecting a one that matches or returning -EINVAL for unsupported
> rates.
> 
> Also: update the davinci cpufreq driver. It's the only user of this
> clock and currently it passes the cpufreq table index to
> clk_set_rate(), which is confusing. Make it pass the requested clock
> rate in Hz.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
>  arch/arm/mach-davinci/da850.c     | 22 ++++++++++++++++++----
>  drivers/cpufreq/davinci-cpufreq.c |  2 +-
>  2 files changed, 19 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
> index a55101c..92e3303 100644
> --- a/arch/arm/mach-davinci/da850.c
> +++ b/arch/arm/mach-davinci/da850.c
> @@ -1179,14 +1179,28 @@ static int da850_set_armrate(struct clk *clk, unsigned long index)
>  	return clk_set_rate(pllclk, index);
>  }
>  
> -static int da850_set_pll0rate(struct clk *clk, unsigned long index)
> +static int da850_set_pll0rate(struct clk *clk, unsigned long rate)
>  {
> -	unsigned int prediv, mult, postdiv;
> -	struct da850_opp *opp;
>  	struct pll_data *pll = clk->pll_data;
> +	struct cpufreq_frequency_table *freq;
> +	unsigned int prediv, mult, postdiv;
> +	struct da850_opp *opp = NULL;
>  	int ret;
>  
> -	opp = (struct da850_opp *) cpufreq_info.freq_table[index].driver_data;
> +	for (freq = da850_freq_table;
> +	     freq->frequency != CPUFREQ_TABLE_END; freq++) {
> +		/* requested_rate is in Hz, freq->frequency is in KHz */
> +		unsigned long freq_rate = freq->frequency * 1000;
> +
> +		if (freq_rate == rate) {
> +			opp = (struct da850_opp *)freq->driver_data;
> +			break;
> +		}
> +	}
> +
> +	if (opp == NULL)
> +		return -EINVAL;
> +
>  	prediv = opp->prediv;
>  	mult = opp->mult;
>  	postdiv = opp->postdiv;
> diff --git a/drivers/cpufreq/davinci-cpufreq.c b/drivers/cpufreq/davinci-cpufreq.c
> index b95a872..d54a27c 100644
> --- a/drivers/cpufreq/davinci-cpufreq.c
> +++ b/drivers/cpufreq/davinci-cpufreq.c
> @@ -55,7 +55,7 @@ static int davinci_target(struct cpufreq_policy *policy, unsigned int idx)
>  			return ret;
>  	}
>  
> -	ret = clk_set_rate(armclk, idx);
> +	ret = clk_set_rate(armclk, new_freq * 1000);
>  	if (ret)
>  		return ret;

I haven't checked the internal of davinci or the way rate is changed now, but
from cpufreq's perspective, fee free to add my:

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

-- 
viresh

[toc] | [prev] | [next] | [standalone]

#1535923

On Friday 02 December 2016 09:08 PM, Bartosz Golaszewski wrote:
> This function is broken - its second argument is an index to the freq
> table, not the requested clock rate in Hz. It leads to an oops when
> called from clk_set_rate() since this argument isn't bounds checked
> either.
> 
> Fix it by iterating over the array of supported frequencies and
> selecting a one that matches or returning -EINVAL for unsupported
> rates.
> 
> Also: update the davinci cpufreq driver. It's the only user of this
> clock and currently it passes the cpufreq table index to
> clk_set_rate(), which is confusing. Make it pass the requested clock
> rate in Hz.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
>  arch/arm/mach-davinci/da850.c     | 22 ++++++++++++++++++----
>  drivers/cpufreq/davinci-cpufreq.c |  2 +-
>  2 files changed, 19 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
> index a55101c..92e3303 100644
> --- a/arch/arm/mach-davinci/da850.c
> +++ b/arch/arm/mach-davinci/da850.c
> @@ -1179,14 +1179,28 @@ static int da850_set_armrate(struct clk *clk, unsigned long index)
>  	return clk_set_rate(pllclk, index);
>  }
>  
> -static int da850_set_pll0rate(struct clk *clk, unsigned long index)
> +static int da850_set_pll0rate(struct clk *clk, unsigned long rate)
>  {
> -	unsigned int prediv, mult, postdiv;
> -	struct da850_opp *opp;
>  	struct pll_data *pll = clk->pll_data;
> +	struct cpufreq_frequency_table *freq;
> +	unsigned int prediv, mult, postdiv;
> +	struct da850_opp *opp = NULL;
>  	int ret;
>  
> -	opp = (struct da850_opp *) cpufreq_info.freq_table[index].driver_data;
> +	for (freq = da850_freq_table;
> +	     freq->frequency != CPUFREQ_TABLE_END; freq++) {
> +		/* requested_rate is in Hz, freq->frequency is in KHz */
> +		unsigned long freq_rate = freq->frequency * 1000;

A small optimization here. Instead of multiplying potentially every
frequency in the table by 1000, you could divide the incoming rate down
to KHz. This will also avoid the need for 'freq_rate'. Should have
noticed this earlier. Sorry about that.

Thanks,
Sekhar

[toc] | [prev] | [next] | [standalone]

#1535938

2016-12-05 9:45 GMT+01:00 Sekhar Nori <nsekhar@ti.com>:
> On Friday 02 December 2016 09:08 PM, Bartosz Golaszewski wrote:
>> This function is broken - its second argument is an index to the freq
>> table, not the requested clock rate in Hz. It leads to an oops when
>> called from clk_set_rate() since this argument isn't bounds checked
>> either.
>>
>> Fix it by iterating over the array of supported frequencies and
>> selecting a one that matches or returning -EINVAL for unsupported
>> rates.
>>
>> Also: update the davinci cpufreq driver. It's the only user of this
>> clock and currently it passes the cpufreq table index to
>> clk_set_rate(), which is confusing. Make it pass the requested clock
>> rate in Hz.
>>
>> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>> ---
>>  arch/arm/mach-davinci/da850.c     | 22 ++++++++++++++++++----
>>  drivers/cpufreq/davinci-cpufreq.c |  2 +-
>>  2 files changed, 19 insertions(+), 5 deletions(-)
>>
>> diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
>> index a55101c..92e3303 100644
>> --- a/arch/arm/mach-davinci/da850.c
>> +++ b/arch/arm/mach-davinci/da850.c
>> @@ -1179,14 +1179,28 @@ static int da850_set_armrate(struct clk *clk, unsigned long index)
>>       return clk_set_rate(pllclk, index);
>>  }
>>
>> -static int da850_set_pll0rate(struct clk *clk, unsigned long index)
>> +static int da850_set_pll0rate(struct clk *clk, unsigned long rate)
>>  {
>> -     unsigned int prediv, mult, postdiv;
>> -     struct da850_opp *opp;
>>       struct pll_data *pll = clk->pll_data;
>> +     struct cpufreq_frequency_table *freq;
>> +     unsigned int prediv, mult, postdiv;
>> +     struct da850_opp *opp = NULL;
>>       int ret;
>>
>> -     opp = (struct da850_opp *) cpufreq_info.freq_table[index].driver_data;
>> +     for (freq = da850_freq_table;
>> +          freq->frequency != CPUFREQ_TABLE_END; freq++) {
>> +             /* requested_rate is in Hz, freq->frequency is in KHz */
>> +             unsigned long freq_rate = freq->frequency * 1000;
>
> A small optimization here. Instead of multiplying potentially every
> frequency in the table by 1000, you could divide the incoming rate down
> to KHz. This will also avoid the need for 'freq_rate'. Should have
> noticed this earlier. Sorry about that.
>
> Thanks,
> Sekhar

I thought about it, but figured the multiplication would be safer. I
will change it if you prefer this version.

Best regards,
Bartosz Golaszewski

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web