Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1535911 > unrolled thread
| Started by | Niklas Cassel <niklas.cassel@axis.com> |
|---|---|
| First post | 2016-12-05 10:20 +0100 |
| Last post | 2016-12-05 11:10 +0100 |
| Articles | 4 — 1 participant |
Back to article view | Back to linux.kernel
[PATCH v2 0/6] net: stmmac: make DMA programmable burst length more configurable Niklas Cassel <niklas.cassel@axis.com> - 2016-12-05 10:20 +0100
[PATCH v2 4/6] net: stmmac: dwmac1000: fix define DMA_BUS_MODE_RPBL_MASK Niklas Cassel <niklas.cassel@axis.com> - 2016-12-05 10:20 +0100
[PATCH v2 2/6] net: stmmac: simplify the common DMA init API Niklas Cassel <niklas.cassel@axis.com> - 2016-12-05 11:10 +0100
[PATCH v2 1/6] net: stmmac: return error if no DMA configuration is found Niklas Cassel <niklas.cassel@axis.com> - 2016-12-05 11:10 +0100
| From | Niklas Cassel <niklas.cassel@axis.com> |
|---|---|
| Date | 2016-12-05 10:20 +0100 |
| Subject | [PATCH v2 0/6] net: stmmac: make DMA programmable burst length more configurable |
| Message-ID | <sKXBf-2G5-3@gated-at.bofh.it> |
From: Niklas Cassel <niklas.cassel@axis.com> Make DMA programmable burst length more configurable in the stmmac driver. This is done by adding support for independent pbl for tx/rx through DT. More fine grained tuning of pbl is possible thanks to a DT property saying that we should NOT multiply pbl values by x8/x4 in hardware. All new DT properties are optional, and created in a way that it will not affect any existing DT configurations. Changes since V1: Created cover-letter. Rebased patch set against next-20161205, since conflicting patches to stmmac_platform.c has been merged since V1. Niklas Cassel (6): net: stmmac: return error if no DMA configuration is found net: stmmac: simplify the common DMA init API net: stmmac: stmmac_platform: fix parsing of DT binding net: stmmac: dwmac1000: fix define DMA_BUS_MODE_RPBL_MASK net: stmmac: add support for independent DMA pbl for tx/rx net: smmac: allow configuring lower pbl values Documentation/devicetree/bindings/net/stmmac.txt | 8 +++++- Documentation/networking/stmmac.txt | 24 ++++++++++++----- drivers/net/ethernet/stmicro/stmmac/common.h | 4 +-- drivers/net/ethernet/stmicro/stmmac/dwmac1000.h | 2 +- .../net/ethernet/stmicro/stmmac/dwmac1000_dma.c | 26 ++++++++++--------- drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c | 7 ++--- drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 25 ++++++++++-------- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 17 ++++++------ drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 2 ++ .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 30 ++++++++++++---------- include/linux/stmmac.h | 3 +++ 11 files changed, 89 insertions(+), 59 deletions(-) -- 2.1.4
[toc] | [next] | [standalone]
| From | Niklas Cassel <niklas.cassel@axis.com> |
|---|---|
| Date | 2016-12-05 10:20 +0100 |
| Subject | [PATCH v2 4/6] net: stmmac: dwmac1000: fix define DMA_BUS_MODE_RPBL_MASK |
| Message-ID | <sKXBh-2G5-53@gated-at.bofh.it> |
| In reply to | #1535911 |
From: Niklas Cassel <niklas.cassel@axis.com>
DMA_BUS_MODE_RPBL_MASK is really 6 bits,
just like DMA_BUS_MODE_PBL_MASK.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac1000.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
index ff3e5ab39bd0..52b9407a8a39 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
@@ -225,7 +225,7 @@ enum rx_tx_priority_ratio {
#define DMA_BUS_MODE_FB 0x00010000 /* Fixed burst */
#define DMA_BUS_MODE_MB 0x04000000 /* Mixed burst */
-#define DMA_BUS_MODE_RPBL_MASK 0x003e0000 /* Rx-Programmable Burst Len */
+#define DMA_BUS_MODE_RPBL_MASK 0x007e0000 /* Rx-Programmable Burst Len */
#define DMA_BUS_MODE_RPBL_SHIFT 17
#define DMA_BUS_MODE_USP 0x00800000
#define DMA_BUS_MODE_MAXPBL 0x01000000
--
2.1.4
[toc] | [prev] | [next] | [standalone]
| From | Niklas Cassel <niklas.cassel@axis.com> |
|---|---|
| Date | 2016-12-05 11:10 +0100 |
| Subject | [PATCH v2 2/6] net: stmmac: simplify the common DMA init API |
| Message-ID | <sKYnE-3bM-43@gated-at.bofh.it> |
| In reply to | #1535911 |
From: Niklas Cassel <niklas.cassel@axis.com>
Use struct stmmac_dma_cfg *dma_cfg as an argument rather
than using all the struct members as individual arguments.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
---
drivers/net/ethernet/stmicro/stmmac/common.h | 4 ++--
drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c | 13 +++++++------
drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c | 7 ++++---
drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 14 ++++++++------
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +-----
5 files changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index 3ced2e1703c1..b13a144f72ad 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -412,8 +412,8 @@ extern const struct stmmac_desc_ops ndesc_ops;
struct stmmac_dma_ops {
/* DMA core initialization */
int (*reset)(void __iomem *ioaddr);
- void (*init)(void __iomem *ioaddr, int pbl, int fb, int mb,
- int aal, u32 dma_tx, u32 dma_rx, int atds);
+ void (*init)(void __iomem *ioaddr, struct stmmac_dma_cfg *dma_cfg,
+ u32 dma_tx, u32 dma_rx, int atds);
/* Configure the AXI Bus Mode Register */
void (*axi)(void __iomem *ioaddr, struct stmmac_axi *axi);
/* Dump DMA registers */
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
index 990746955216..01d0d0f315e5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
@@ -82,8 +82,9 @@ static void dwmac1000_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi)
writel(value, ioaddr + DMA_AXI_BUS_MODE);
}
-static void dwmac1000_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb,
- int aal, u32 dma_tx, u32 dma_rx, int atds)
+static void dwmac1000_dma_init(void __iomem *ioaddr,
+ struct stmmac_dma_cfg *dma_cfg,
+ u32 dma_tx, u32 dma_rx, int atds)
{
u32 value = readl(ioaddr + DMA_BUS_MODE);
@@ -99,20 +100,20 @@ static void dwmac1000_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb,
*/
value |= DMA_BUS_MODE_MAXPBL;
value &= ~DMA_BUS_MODE_PBL_MASK;
- value |= (pbl << DMA_BUS_MODE_PBL_SHIFT);
+ value |= (dma_cfg->pbl << DMA_BUS_MODE_PBL_SHIFT);
/* Set the Fixed burst mode */
- if (fb)
+ if (dma_cfg->fixed_burst)
value |= DMA_BUS_MODE_FB;
/* Mixed Burst has no effect when fb is set */
- if (mb)
+ if (dma_cfg->mixed_burst)
value |= DMA_BUS_MODE_MB;
if (atds)
value |= DMA_BUS_MODE_ATDS;
- if (aal)
+ if (dma_cfg->aal)
value |= DMA_BUS_MODE_AAL;
writel(value, ioaddr + DMA_BUS_MODE);
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
index 61f54c99a7de..e5664da382f3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
@@ -32,11 +32,12 @@
#include "dwmac100.h"
#include "dwmac_dma.h"
-static void dwmac100_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb,
- int aal, u32 dma_tx, u32 dma_rx, int atds)
+static void dwmac100_dma_init(void __iomem *ioaddr,
+ struct stmmac_dma_cfg *dma_cfg,
+ u32 dma_tx, u32 dma_rx, int atds)
{
/* Enable Application Access by writing to DMA CSR0 */
- writel(DMA_BUS_MODE_DEFAULT | (pbl << DMA_BUS_MODE_PBL_SHIFT),
+ writel(DMA_BUS_MODE_DEFAULT | (dma_cfg->pbl << DMA_BUS_MODE_PBL_SHIFT),
ioaddr + DMA_BUS_MODE);
/* Mask interrupts by writing to CSR7 */
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
index 577316de6ba8..0946546d6dcd 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
@@ -97,27 +97,29 @@ static void dwmac4_dma_init_channel(void __iomem *ioaddr, int pbl,
writel(dma_rx_phy, ioaddr + DMA_CHAN_RX_BASE_ADDR(channel));
}
-static void dwmac4_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb,
- int aal, u32 dma_tx, u32 dma_rx, int atds)
+static void dwmac4_dma_init(void __iomem *ioaddr,
+ struct stmmac_dma_cfg *dma_cfg,
+ u32 dma_tx, u32 dma_rx, int atds)
{
u32 value = readl(ioaddr + DMA_SYS_BUS_MODE);
int i;
/* Set the Fixed burst mode */
- if (fb)
+ if (dma_cfg->fixed_burst)
value |= DMA_SYS_BUS_FB;
/* Mixed Burst has no effect when fb is set */
- if (mb)
+ if (dma_cfg->mixed_burst)
value |= DMA_SYS_BUS_MB;
- if (aal)
+ if (dma_cfg->aal)
value |= DMA_SYS_BUS_AAL;
writel(value, ioaddr + DMA_SYS_BUS_MODE);
for (i = 0; i < DMA_CHANNEL_NB_MAX; i++)
- dwmac4_dma_init_channel(ioaddr, pbl, dma_tx, dma_rx, i);
+ dwmac4_dma_init_channel(ioaddr, dma_cfg->pbl,
+ dma_tx, dma_rx, i);
}
static void _dwmac4_dump_dma_regs(void __iomem *ioaddr, u32 channel)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 14366800e5e6..b1e42ddf0370 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1595,11 +1595,7 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv)
return ret;
}
- priv->hw->dma->init(priv->ioaddr,
- priv->plat->dma_cfg->pbl,
- priv->plat->dma_cfg->fixed_burst,
- priv->plat->dma_cfg->mixed_burst,
- priv->plat->dma_cfg->aal,
+ priv->hw->dma->init(priv->ioaddr, priv->plat->dma_cfg,
priv->dma_tx_phy, priv->dma_rx_phy, atds);
if (priv->synopsys_id >= DWMAC_CORE_4_00) {
--
2.1.4
[toc] | [prev] | [next] | [standalone]
| From | Niklas Cassel <niklas.cassel@axis.com> |
|---|---|
| Date | 2016-12-05 11:10 +0100 |
| Subject | [PATCH v2 1/6] net: stmmac: return error if no DMA configuration is found |
| Message-ID | <sKYnF-3bM-61@gated-at.bofh.it> |
| In reply to | #1535911 |
From: Niklas Cassel <niklas.cassel@axis.com>
All drivers except pci glue layer calls stmmac_probe_config_dt.
stmmac_probe_config_dt does a kzalloc dma_cfg.
pci glue layer does kzalloc dma_cfg explicitly, so all current
drivers does a kzalloc dma_cfg.
Return an error if no DMA configuration is found, that way
we can assume that the DMA configuration always exists.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 982c95213da4..14366800e5e6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1578,16 +1578,12 @@ static void stmmac_check_ether_addr(struct stmmac_priv *priv)
*/
static int stmmac_init_dma_engine(struct stmmac_priv *priv)
{
- int pbl = DEFAULT_DMA_PBL, fixed_burst = 0, aal = 0;
- int mixed_burst = 0;
int atds = 0;
int ret = 0;
- if (priv->plat->dma_cfg) {
- pbl = priv->plat->dma_cfg->pbl;
- fixed_burst = priv->plat->dma_cfg->fixed_burst;
- mixed_burst = priv->plat->dma_cfg->mixed_burst;
- aal = priv->plat->dma_cfg->aal;
+ if (!priv->plat->dma_cfg) {
+ dev_err(priv->device, "DMA configuration not found\n");
+ return -EINVAL;
}
if (priv->extend_desc && (priv->mode == STMMAC_RING_MODE))
@@ -1599,8 +1595,12 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv)
return ret;
}
- priv->hw->dma->init(priv->ioaddr, pbl, fixed_burst, mixed_burst,
- aal, priv->dma_tx_phy, priv->dma_rx_phy, atds);
+ priv->hw->dma->init(priv->ioaddr,
+ priv->plat->dma_cfg->pbl,
+ priv->plat->dma_cfg->fixed_burst,
+ priv->plat->dma_cfg->mixed_burst,
+ priv->plat->dma_cfg->aal,
+ priv->dma_tx_phy, priv->dma_rx_phy, atds);
if (priv->synopsys_id >= DWMAC_CORE_4_00) {
priv->rx_tail_addr = priv->dma_rx_phy +
--
2.1.4
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web