Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1532209 > unrolled thread

[PATCH v3 2/2] ARM: dts: da850: specify the maximum pixel clock rate for tilcdc

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v3 2/2] ARM: dts: da850: specify the maximum pixel clock rate for tilcdc Bartosz Golaszewski <bgolaszewski@baylibre.com> - 2016-11-29 13:00 +0100

#1532209 — [PATCH v3 2/2] ARM: dts: da850: specify the maximum pixel clock rate for tilcdc

At maximum CPU frequency of 300 MHz the maximum pixel clock frequency
is 37.5 MHz[1]. We must filter out any mode for which the calculated
pixel clock rate would exceed this value.

Specify the max-pixelclock property for the display node for
da850-lcdk.

[1] http://processors.wiki.ti.com/index.php/OMAP-L1x/C674x/AM1x_LCD_Controller_(LCDC)_Throughput_and_Optimization_Techniques

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/boot/dts/da850.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 5f4ba2e..00692d3 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -453,6 +453,7 @@
 			compatible = "ti,da850-tilcdc";
 			reg = <0x213000 0x1000>;
 			interrupts = <52>;
+			max-pixelclock = <37500>;
 			status = "disabled";
 
 			ports {
-- 
2.9.3

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web