Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1526803 > unrolled thread
| Started by | Jerome Brunet <jbrunet@baylibre.com> |
|---|---|
| First post | 2016-11-21 16:40 +0100 |
| Last post | 2016-11-22 06:10 +0100 |
| Articles | 2 — 2 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
[RFC PATCH net v2 1/3] net: phy: add an option to disable EEE advertisement Jerome Brunet <jbrunet@baylibre.com> - 2016-11-21 16:40 +0100
Re: [RFC PATCH net v2 1/3] net: phy: add an option to disable EEE advertisement Anand Moon <linux.amoon@gmail.com> - 2016-11-22 06:10 +0100
| From | Jerome Brunet <jbrunet@baylibre.com> |
|---|---|
| Date | 2016-11-21 16:40 +0100 |
| Subject | [RFC PATCH net v2 1/3] net: phy: add an option to disable EEE advertisement |
| Message-ID | <sFYRk-2Wx-23@gated-at.bofh.it> |
This patch adds an option to disable EEE advertisement in the generic PHY
by providing a mask of prohibited modes corresponding to the value found in
the MDIO_AN_EEE_ADV register.
On some platforms, PHY Low power idle seems to be causing issues, even
breaking the link some cases. The patch provides a convenient way for these
platforms to disable EEE advertisement and work around the issue.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
drivers/net/phy/phy.c | 3 ++
drivers/net/phy/phy_device.c | 80 +++++++++++++++++++++++++++++++++++++++-----
include/linux/phy.h | 3 ++
3 files changed, 77 insertions(+), 9 deletions(-)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index f424b867f73e..a44ee14bd953 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -1348,6 +1348,9 @@ int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
{
int val = ethtool_adv_to_mmd_eee_adv_t(data->advertised);
+ /* Mask prohibited EEE modes */
+ val &= ~phydev->eee_advert_disabled;
+
phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN, val);
return 0;
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 1a4bf8acad78..74c628e046cb 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1116,6 +1116,43 @@ static int genphy_config_advert(struct phy_device *phydev)
}
/**
+ * genphy_config_eee_advert - disable unwanted eee mode advertisement
+ * @phydev: target phy_device struct
+ *
+ * Description: Writes MDIO_AN_EEE_ADV after disabling unsupported energy
+ * efficent ethernet modes. Returns 0 if the PHY's advertisement hasn't
+ * changed, and 1 if it has changed.
+ */
+static int genphy_config_eee_advert(struct phy_device *phydev)
+{
+ u32 disabled = phydev->eee_advert_disabled;
+ u32 old_adv, adv;
+
+ /* Nothing to disable */
+ if (!disabled)
+ return 0;
+
+ /* If the following call fails, we assume that EEE is not
+ * supported by the phy. If we read 0, EEE is not advertised
+ * In both case, we don't need to continue
+ */
+ adv = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN);
+ if (adv <= 0)
+ return 0;
+
+ old_adv = adv;
+ adv &= ~disabled;
+
+ /* Advertising remains unchanged with the ban */
+ if (old_adv == adv)
+ return 0;
+
+ phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN, adv);
+
+ return 1;
+}
+
+/**
* genphy_setup_forced - configures/forces speed/duplex from @phydev
* @phydev: target phy_device struct
*
@@ -1173,15 +1210,20 @@ EXPORT_SYMBOL(genphy_restart_aneg);
*/
int genphy_config_aneg(struct phy_device *phydev)
{
- int result;
+ int err, changed;
+
+ changed = genphy_config_eee_advert(phydev);
if (AUTONEG_ENABLE != phydev->autoneg)
return genphy_setup_forced(phydev);
- result = genphy_config_advert(phydev);
- if (result < 0) /* error */
- return result;
- if (result == 0) {
+ err = genphy_config_advert(phydev);
+ if (err < 0) /* error */
+ return err;
+
+ changed |= err;
+
+ if (changed == 0) {
/* Advertisement hasn't changed, but maybe aneg was never on to
* begin with? Or maybe phy was isolated?
*/
@@ -1191,16 +1233,16 @@ int genphy_config_aneg(struct phy_device *phydev)
return ctl;
if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE))
- result = 1; /* do restart aneg */
+ changed = 1; /* do restart aneg */
}
/* Only restart aneg if we are advertising something different
* than we were before.
*/
- if (result > 0)
- result = genphy_restart_aneg(phydev);
+ if (changed > 0)
+ return genphy_restart_aneg(phydev);
- return result;
+ return 0;
}
EXPORT_SYMBOL(genphy_config_aneg);
@@ -1558,6 +1600,21 @@ static void of_set_phy_supported(struct phy_device *phydev)
__set_phy_supported(phydev, max_speed);
}
+static void of_set_phy_eee_disable(struct phy_device *phydev)
+{
+ struct device_node *node = phydev->mdio.dev.of_node;
+ u32 disabled;
+
+ if (!IS_ENABLED(CONFIG_OF_MDIO))
+ return;
+
+ if (!node)
+ return;
+
+ if (!of_property_read_u32(node, "eee-advert-disable", &disabled))
+ phydev->eee_advert_disabled = disabled;
+}
+
/**
* phy_probe - probe and init a PHY device
* @dev: device to probe and init
@@ -1595,6 +1652,11 @@ static int phy_probe(struct device *dev)
of_set_phy_supported(phydev);
phydev->advertising = phydev->supported;
+ /* Get the EEE modes we want to prohibit. We will ask
+ * the PHY stop advertising these mode later on
+ */
+ of_set_phy_eee_disable(phydev);
+
/* Set the state to READY by default */
phydev->state = PHY_READY;
diff --git a/include/linux/phy.h b/include/linux/phy.h
index e25f1830fbcf..7f2ea0af16d1 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -401,6 +401,9 @@ struct phy_device {
u32 advertising;
u32 lp_advertising;
+ /* Energy efficient ethernet modes which should be prohibited */
+ u32 eee_advert_disabled;
+
int autoneg;
int link_timeout;
--
2.7.4
[toc] | [next] | [standalone]
| From | Anand Moon <linux.amoon@gmail.com> |
|---|---|
| Date | 2016-11-22 06:10 +0100 |
| Message-ID | <sGbvb-2Mm-5@gated-at.bofh.it> |
| In reply to | #1526803 |
Hi Jerome,
On 21 November 2016 at 21:05, Jerome Brunet <jbrunet@baylibre.com> wrote:
> This patch adds an option to disable EEE advertisement in the generic PHY
> by providing a mask of prohibited modes corresponding to the value found in
> the MDIO_AN_EEE_ADV register.
>
> On some platforms, PHY Low power idle seems to be causing issues, even
> breaking the link some cases. The patch provides a convenient way for these
> platforms to disable EEE advertisement and work around the issue.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
> drivers/net/phy/phy.c | 3 ++
> drivers/net/phy/phy_device.c | 80 +++++++++++++++++++++++++++++++++++++++-----
> include/linux/phy.h | 3 ++
> 3 files changed, 77 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
> index f424b867f73e..a44ee14bd953 100644
> --- a/drivers/net/phy/phy.c
> +++ b/drivers/net/phy/phy.c
> @@ -1348,6 +1348,9 @@ int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
> {
> int val = ethtool_adv_to_mmd_eee_adv_t(data->advertised);
>
> + /* Mask prohibited EEE modes */
> + val &= ~phydev->eee_advert_disabled;
> +
> phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN, val);
>
> return 0;
> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
> index 1a4bf8acad78..74c628e046cb 100644
> --- a/drivers/net/phy/phy_device.c
> +++ b/drivers/net/phy/phy_device.c
> @@ -1116,6 +1116,43 @@ static int genphy_config_advert(struct phy_device *phydev)
> }
>
> /**
> + * genphy_config_eee_advert - disable unwanted eee mode advertisement
> + * @phydev: target phy_device struct
> + *
> + * Description: Writes MDIO_AN_EEE_ADV after disabling unsupported energy
> + * efficent ethernet modes. Returns 0 if the PHY's advertisement hasn't
> + * changed, and 1 if it has changed.
> + */
> +static int genphy_config_eee_advert(struct phy_device *phydev)
> +{
> + u32 disabled = phydev->eee_advert_disabled;
> + u32 old_adv, adv;
> +
> + /* Nothing to disable */
> + if (!disabled)
> + return 0;
> +
> + /* If the following call fails, we assume that EEE is not
> + * supported by the phy. If we read 0, EEE is not advertised
> + * In both case, we don't need to continue
> + */
> + adv = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN);
> + if (adv <= 0)
> + return 0;
> +
> + old_adv = adv;
> + adv &= ~disabled;
> +
> + /* Advertising remains unchanged with the ban */
> + if (old_adv == adv)
> + return 0;
> +
> + phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN, adv);
> +
> + return 1;
> +}
> +
> +/**
> * genphy_setup_forced - configures/forces speed/duplex from @phydev
> * @phydev: target phy_device struct
> *
> @@ -1173,15 +1210,20 @@ EXPORT_SYMBOL(genphy_restart_aneg);
> */
> int genphy_config_aneg(struct phy_device *phydev)
> {
> - int result;
> + int err, changed;
> +
> + changed = genphy_config_eee_advert(phydev);
>
> if (AUTONEG_ENABLE != phydev->autoneg)
> return genphy_setup_forced(phydev);
>
> - result = genphy_config_advert(phydev);
> - if (result < 0) /* error */
> - return result;
> - if (result == 0) {
> + err = genphy_config_advert(phydev);
> + if (err < 0) /* error */
> + return err;
> +
> + changed |= err;
> +
> + if (changed == 0) {
> /* Advertisement hasn't changed, but maybe aneg was never on to
> * begin with? Or maybe phy was isolated?
> */
> @@ -1191,16 +1233,16 @@ int genphy_config_aneg(struct phy_device *phydev)
> return ctl;
>
> if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE))
> - result = 1; /* do restart aneg */
> + changed = 1; /* do restart aneg */
> }
>
> /* Only restart aneg if we are advertising something different
> * than we were before.
> */
> - if (result > 0)
> - result = genphy_restart_aneg(phydev);
> + if (changed > 0)
> + return genphy_restart_aneg(phydev);
>
> - return result;
> + return 0;
> }
> EXPORT_SYMBOL(genphy_config_aneg);
>
> @@ -1558,6 +1600,21 @@ static void of_set_phy_supported(struct phy_device *phydev)
> __set_phy_supported(phydev, max_speed);
> }
>
> +static void of_set_phy_eee_disable(struct phy_device *phydev)
> +{
> + struct device_node *node = phydev->mdio.dev.of_node;
> + u32 disabled;
> +
> + if (!IS_ENABLED(CONFIG_OF_MDIO))
> + return;
> +
> + if (!node)
> + return;
> +
> + if (!of_property_read_u32(node, "eee-advert-disable", &disabled))
> + phydev->eee_advert_disabled = disabled;
> +}
> +
> /**
> * phy_probe - probe and init a PHY device
> * @dev: device to probe and init
> @@ -1595,6 +1652,11 @@ static int phy_probe(struct device *dev)
> of_set_phy_supported(phydev);
> phydev->advertising = phydev->supported;
>
> + /* Get the EEE modes we want to prohibit. We will ask
> + * the PHY stop advertising these mode later on
> + */
> + of_set_phy_eee_disable(phydev);
> +
> /* Set the state to READY by default */
> phydev->state = PHY_READY;
>
> diff --git a/include/linux/phy.h b/include/linux/phy.h
> index e25f1830fbcf..7f2ea0af16d1 100644
> --- a/include/linux/phy.h
> +++ b/include/linux/phy.h
> @@ -401,6 +401,9 @@ struct phy_device {
> u32 advertising;
> u32 lp_advertising;
>
> + /* Energy efficient ethernet modes which should be prohibited */
> + u32 eee_advert_disabled;
> +
> int autoneg;
>
> int link_timeout;
> --
> 2.7.4
>
iperf3 tcp test summary at my end
Test Complete. Summary Results:
[ ID] Interval Transfer Bandwidth Retr
[ 4] 0.00-100.00 sec 10.9 GBytes 936 Mbits/sec 0 sender
[ 4] 0.00-100.00 sec 10.9 GBytes 936 Mbits/sec receiver
CPU Utilization: local/sender 5.7% (0.2%u/5.5%s), remote/receiver
11.9% (0.9%u/11.0%s)
iperf3 udp test summary at my end.
Test Complete. Summary Results:
[ ID] Interval Transfer Bandwidth Jitter
Lost/Total Datagrams
[ 4] 0.00-100.00 sec 12.5 MBytes 1.05 Mbits/sec 0.025 ms 0/1599 (0%)
[ 4] Sent 1599 datagrams
CPU Utilization: local/sender 0.1% (0.0%u/0.1%s), remote/receiver 0.0%
(0.0%u/0.0%s)
Best Regards
-Anand Moon
>
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web