Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1523629 > unrolled thread
| Started by | Robin Murphy <robin.murphy@arm.com> |
|---|---|
| First post | 2016-11-16 17:10 +0100 |
| Last post | 2016-11-16 17:10 +0100 |
| Articles | 1 — 1 participant |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
Re: [PATCH 1/2] ahci: qoriq: added a condition to enable dma coherence Robin Murphy <robin.murphy@arm.com> - 2016-11-16 17:10 +0100
| From | Robin Murphy <robin.murphy@arm.com> |
|---|---|
| Date | 2016-11-16 17:10 +0100 |
| Subject | Re: [PATCH 1/2] ahci: qoriq: added a condition to enable dma coherence |
| Message-ID | <sEaWB-56K-1@gated-at.bofh.it> |
On 16/11/16 03:11, yuantian.tang@nxp.com wrote:
> From: Tang Yuantian <Yuantian.Tang@nxp.com>
>
> Enable DMA coherence in SATA controller on condition that
> dma-coherent property exists in sata node in DTS.
>
> Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com>
> ---
> drivers/ata/ahci_qoriq.c | 15 +++++++++++----
> 1 file changed, 11 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c
> index 9884c8c..45c88de 100644
> --- a/drivers/ata/ahci_qoriq.c
> +++ b/drivers/ata/ahci_qoriq.c
> @@ -59,6 +59,7 @@ struct ahci_qoriq_priv {
> struct ccsr_ahci *reg_base;
> enum ahci_qoriq_type type;
> void __iomem *ecc_addr;
> + bool is_dmacoherent;
> };
>
> static const struct of_device_id ahci_qoriq_of_match[] = {
> @@ -164,26 +165,31 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
> writel(LS1021A_PORT_PHY4, reg_base + PORT_PHY4);
> writel(LS1021A_PORT_PHY5, reg_base + PORT_PHY5);
> writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
> - writel(AHCI_PORT_AXICC_CFG, reg_base + LS1021A_AXICC_ADDR);
> + if (qpriv->is_dmacoherent)
> + writel(AHCI_PORT_AXICC_CFG,
> + reg_base + LS1021A_AXICC_ADDR);
> break;
>
> case AHCI_LS1043A:
> writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
> writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
> - writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
> + if (qpriv->is_dmacoherent)
> + writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
> break;
>
> case AHCI_LS2080A:
> writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
> writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
> - writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
> + if (qpriv->is_dmacoherent)
> + writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
> break;
>
> case AHCI_LS1046A:
> writel(LS1046A_SATA_ECC_DIS, qpriv->ecc_addr);
> writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
> writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
> - writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
> + if (qpriv->is_dmacoherent)
> + writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
> break;
> }
>
> @@ -221,6 +227,7 @@ static int ahci_qoriq_probe(struct platform_device *pdev)
> if (IS_ERR(qoriq_priv->ecc_addr))
> return PTR_ERR(qoriq_priv->ecc_addr);
> }
> + qoriq_priv->is_dmacoherent = of_property_read_bool(np, "dma-coherent");
Better to use of_dma_is_coherent(np) rather than open-coding it.
Robin.
>
> rc = ahci_platform_enable_resources(hpriv);
> if (rc)
>
Back to top | Article view | linux.kernel
csiph-web