Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1525311 > unrolled thread
| Started by | Chen-Yu Tsai <wens@csie.org> |
|---|---|
| First post | 2016-11-18 14:30 +0100 |
| Last post | 2016-11-18 14:30 +0100 |
| Articles | 1 — 1 participant |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
Re: [PATCH] clk: sunxi-ng: enable so-said LDOs for A33 SoC's pll-mipi clock Chen-Yu Tsai <wens@csie.org> - 2016-11-18 14:30 +0100
| From | Chen-Yu Tsai <wens@csie.org> |
|---|---|
| Date | 2016-11-18 14:30 +0100 |
| Subject | Re: [PATCH] clk: sunxi-ng: enable so-said LDOs for A33 SoC's pll-mipi clock |
| Message-ID | <sERoS-7Cf-7@gated-at.bofh.it> |
On Fri, Nov 18, 2016 at 12:49 AM, Icenowy Zheng <icenowy@aosc.xyz> wrote:
> In the user manual of A33 SoC, the bit 22 and 23 of pll-mipi control
> register is called "LDO{1,2}_EN", and according to the BSP source code
> from Allwinner [1], the LDOs are enabled during the clock's enabling
> process.
>
> The clock failed to generate output if the two LDOs are not enabled.
>
> Add the two bits to the clock's gate bits, so that the LDOs are enabled
> when the PLL is enabled.
>
> [1] https://github.com/allwinner-zh/linux-3.4-sunxi/blob/master/drivers/clk/sunxi/clk-sun8iw5.c#L429
>
> Fixes: d05c748bd730 ("clk: sunxi-ng: Add A33 CCU support")
>
You don't need the extra line.
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Acked-by: Chen-Yu Tsai <wens@csie.org>
> ---
> Dear Chen-Yu:
> As you said, the two bits are also present in the CCU of A23 and A31.
> Could you please check whether the PLL works on the two SoCs?
> I remembered you mentioned you failed to make TCON enabled on A23.
> On A31, you may hack the parent of tcon-ch0 to force the tcon clock to
> use pll-mipi as parent, in order to check whether the pll works.
>
> However, I didn't found the code that enables the LDOs in the BSP A23/31
> sources, so you must test them to ensure whether the code is needed for
> these SoCs.
I tested out this for both the A31 and the A23. It fixes issues I've
had with DRM. I'll send patches for them.
ChenYu
> Regards,
> Icenowy
> drivers/clk/sunxi-ng/ccu-sun8i-a33.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-a33.c b/drivers/clk/sunxi-ng/ccu-sun8i-a33.c
> index 96b40ca..9bd1f78 100644
> --- a/drivers/clk/sunxi-ng/ccu-sun8i-a33.c
> +++ b/drivers/clk/sunxi-ng/ccu-sun8i-a33.c
> @@ -131,7 +131,7 @@ static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_mipi_clk, "pll-mipi",
> 8, 4, /* N */
> 4, 2, /* K */
> 0, 4, /* M */
> - BIT(31), /* gate */
> + BIT(31) | BIT(23) | BIT(22), /* gate */
> BIT(28), /* lock */
> CLK_SET_RATE_UNGATE);
>
> --
> 2.10.1
>
Back to top | Article view | linux.kernel
csiph-web