Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1515911 > unrolled thread

[PATCH V4 2/6] clk: tegra: add TEGRA30_CLK_NOR to init table

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH V4 2/6] clk: tegra: add TEGRA30_CLK_NOR to init table Mirza Krak <mirza.krak@gmail.com> - 2016-11-07 09:40 +0100
    Re: [PATCH V4 2/6] clk: tegra: add TEGRA30_CLK_NOR to init table Thierry Reding <thierry.reding@gmail.com> - 2016-11-07 12:30 +0100

#1515911 — [PATCH V4 2/6] clk: tegra: add TEGRA30_CLK_NOR to init table

From: Mirza Krak <mirza.krak@gmail.com>

Add TEGRA30_CLK_NOR to init table and set default rate to 127 MHz which
is max rate.

The maximum rate value of 127 MHz is pulled from the downstream L4T
kernel.

Signed-off-by: Mirza Krak <mirza.krak@gmail.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Colibri T20/T30 on EvalBoard V3.x and GMI-Memory Board
Acked-by: Jon Hunter <jonathanh@nvidia.com>
---

Changes in v2:
- no changes

Changes in v3:
- Added comment in commit message where I got the maximum rates from.

Changes in V4:
- no changes

 drivers/clk/tegra/clk-tegra30.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index 8e2db5e..67f1677 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -1252,6 +1252,7 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA30_CLK_SDMMC1, TEGRA30_CLK_PLL_P, 48000000, 0 },
 	{ TEGRA30_CLK_SDMMC2, TEGRA30_CLK_PLL_P, 48000000, 0 },
 	{ TEGRA30_CLK_SDMMC3, TEGRA30_CLK_PLL_P, 48000000, 0 },
+	{ TEGRA30_CLK_NOR, TEGRA30_CLK_PLL_P, 127000000, 0 },
 	{ TEGRA30_CLK_PLL_M, TEGRA30_CLK_CLK_MAX, 0, 1 },
 	{ TEGRA30_CLK_PCLK, TEGRA30_CLK_CLK_MAX, 0, 1 },
 	{ TEGRA30_CLK_CSITE, TEGRA30_CLK_CLK_MAX, 0, 1 },
--
2.1.4

[toc] | [next] | [standalone]

#1516014

[Multipart message — attachments visible in raw view] — view raw

On Mon, Nov 07, 2016 at 09:30:01AM +0100, Mirza Krak wrote:
> From: Mirza Krak <mirza.krak@gmail.com>
> 
> Add TEGRA30_CLK_NOR to init table and set default rate to 127 MHz which
> is max rate.
> 
> The maximum rate value of 127 MHz is pulled from the downstream L4T
> kernel.
> 
> Signed-off-by: Mirza Krak <mirza.krak@gmail.com>
> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Tested-on: Colibri T20/T30 on EvalBoard V3.x and GMI-Memory Board
> Acked-by: Jon Hunter <jonathanh@nvidia.com>
> ---
> 
> Changes in v2:
> - no changes
> 
> Changes in v3:
> - Added comment in commit message where I got the maximum rates from.
> 
> Changes in V4:
> - no changes
> 
>  drivers/clk/tegra/clk-tegra30.c | 1 +
>  1 file changed, 1 insertion(+)

Applied, thanks.

Thierry

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web