Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1468398 > unrolled thread

[PATCH v3 1/4] clocksource: timer-atmel-pit: enable mck

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v3 1/4] clocksource: timer-atmel-pit: enable mck Alexandre Belloni <alexandre.belloni@free-electrons.com> - 2016-08-23 11:00 +0200
    Re: [PATCH v3 1/4] clocksource: timer-atmel-pit: enable mck Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-08-23 16:00 +0200

#1468398 — [PATCH v3 1/4] clocksource: timer-atmel-pit: enable mck

mck is needed to get the PIT working. Explicitly prepare_enable it instead
of assuming it is enabled.

This solves an issue where the system is freezing when the ETM/ETB drivers
are enabled.

Reported-by: Olivier Schonken <olivier.schonken@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 drivers/clocksource/timer-atmel-pit.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/clocksource/timer-atmel-pit.c b/drivers/clocksource/timer-atmel-pit.c
index 1ffac0cb0cb7..3494bc5a21d5 100644
--- a/drivers/clocksource/timer-atmel-pit.c
+++ b/drivers/clocksource/timer-atmel-pit.c
@@ -261,6 +261,12 @@ static int __init at91sam926x_pit_dt_init(struct device_node *node)
 		return PTR_ERR(data->mck);
 	}
 
+	ret = clk_prepare_enable(data->mck);
+	if (ret) {
+		pr_err("Unable to enable mck\n");
+		return ret;
+	}
+
 	/* Get the interrupts property */
 	data->irq = irq_of_parse_and_map(node, 0);
 	if (!data->irq) {
-- 
2.8.1

[toc] | [next] | [standalone]

#1468563

On 08/23/2016 10:44 AM, Alexandre Belloni wrote:
> mck is needed to get the PIT working. Explicitly prepare_enable it instead
> of assuming it is enabled.
> 
> This solves an issue where the system is freezing when the ETM/ETB drivers
> are enabled.
> 
> Reported-by: Olivier Schonken <olivier.schonken@gmail.com>
> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---

Applied this one for tip/timers/urgent

Thanks !

  -- Daniel


-- 
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web