Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1469473 > unrolled thread

[PATCH v2 1/7] clocksource: exynos_mct: Add the support for ARM64

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v2 1/7] clocksource: exynos_mct: Add the support for ARM64 Chanwoo Choi <cw00.choi@samsung.com> - 2016-08-24 16:00 +0200

#1469473 — [PATCH v2 1/7] clocksource: exynos_mct: Add the support for ARM64

This patch adds the support for ARM 64bit. The delay_timer is only supported
on ARM 32bit.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 drivers/clocksource/Kconfig      | 2 +-
 drivers/clocksource/exynos_mct.c | 4 ++++
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 567788664723..ec443c318c77 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -351,7 +351,7 @@ config CLKSRC_METAG_GENERIC
 
 config CLKSRC_EXYNOS_MCT
 	bool "Exynos multi core timer driver" if COMPILE_TEST
-	depends on ARM
+	depends on ARM || ARM64
 	help
 	  Support for Multi Core Timer controller on Exynos SoCs.
 
diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index 41840d02c331..8f3488b80896 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -223,6 +223,7 @@ static u64 notrace exynos4_read_sched_clock(void)
 	return exynos4_read_count_32();
 }
 
+#if defined(CONFIG_ARM)
 static struct delay_timer exynos4_delay_timer;
 
 static cycles_t exynos4_read_current_timer(void)
@@ -231,14 +232,17 @@ static cycles_t exynos4_read_current_timer(void)
 			 "cycles_t needs to move to 32-bit for ARM64 usage");
 	return exynos4_read_count_32();
 }
+#endif
 
 static int __init exynos4_clocksource_init(void)
 {
 	exynos4_mct_frc_start();
 
+#if defined(CONFIG_ARM)
 	exynos4_delay_timer.read_current_timer = &exynos4_read_current_timer;
 	exynos4_delay_timer.freq = clk_rate;
 	register_current_timer_delay(&exynos4_delay_timer);
+#endif
 
 	if (clocksource_register_hz(&mct_frc, clk_rate))
 		panic("%s: can't register clocksource\n", mct_frc.name);
-- 
1.9.1

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web