Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1469166 > unrolled thread

[PATCH 2/2] hwmon: (max6650) Add initial rpm target devicetree documentation

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH 2/2] hwmon: (max6650) Add initial rpm target devicetree documentation Mike Looijmans <mike.looijmans@topic.nl> - 2016-08-24 10:20 +0200

#1469166 — [PATCH 2/2] hwmon: (max6650) Add initial rpm target devicetree documentation

Add devicetree property for early initialization of the fan controller
to prevent overheating, for example when resetting the board while the
fan was completely turned off.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
---
 Documentation/devicetree/bindings/hwmon/max6650.txt | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/hwmon/max6650.txt b/Documentation/devicetree/bindings/hwmon/max6650.txt
index d6c10e3..f6bd87d 100644
--- a/Documentation/devicetree/bindings/hwmon/max6650.txt
+++ b/Documentation/devicetree/bindings/hwmon/max6650.txt
@@ -13,6 +13,10 @@ Optional properties, default is to retain the chip's current setting:
 - maxim,fan-prescale  : Pre-scaling value, as per datasheet [1]. Lower values
 			allow more fine-grained control of slower fans.
 			Valid: 1, 2, 4, 8, 16.
+- maxim,fan-target-rpm: Initial requested fan rotation speed. If specified, the
+			driver selects closed-loop mode and the requested speed.
+			This ensures the fan is already running before userspace
+			takes over.
 
 Example:
 	fan-max6650: max6650@1b {
@@ -20,4 +24,5 @@ Example:
 		compatible = "maxim,max6650";
 		maxim,fan-microvolt = <12000000>;
 		maxim,fan-prescale = <4>;
+		maxim,fan-target-rpm = <1200>;
 	};
-- 
1.9.1

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web