Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1465565 > unrolled thread
| Started by | Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|---|---|
| First post | 2016-08-18 16:40 +0200 |
| Last post | 2016-08-18 16:40 +0200 |
| Articles | 1 — 1 participant |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
[PATCH 4.7 107/186] ARM: dts: sunxi: Add a startup delay for fixed regulator enabled phys Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-08-18 16:40 +0200
| From | Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|---|---|
| Date | 2016-08-18 16:40 +0200 |
| Subject | [PATCH 4.7 107/186] ARM: dts: sunxi: Add a startup delay for fixed regulator enabled phys |
| Message-ID | <s7wEb-10D-59@gated-at.bofh.it> |
4.7-stable review patch. If anyone has any objections, please let me know. ------------------ From: Hans de Goede <hdegoede@redhat.com> commit fc51b632c7b047c25807023b76f3877aed19c770 upstream. It seems that recent kernels have a shorter timeout when scanning for ethernet phys causing us to hit a timeout on boards where the phy's regulator gets enabled just before scanning, which leads to non working ethernet. A 10ms startup delay seems to be enough to fix it, this commit adds a 20ms startup delay just to be safe. This has been tested on a sun4i-a10-a1000 and sun5i-a10s-wobo-i5 board, both of which have non-working ethernet on recent kernels without this fix. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- arch/arm/boot/dts/sun4i-a10-a1000.dts | 1 + arch/arm/boot/dts/sun4i-a10-hackberry.dts | 1 + arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts | 1 + arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts | 1 + 4 files changed, 4 insertions(+) --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -84,6 +84,7 @@ regulator-name = "emac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + startup-delay-us = <20000>; enable-active-high; gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; }; --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -66,6 +66,7 @@ regulator-name = "emac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + startup-delay-us = <20000>; enable-active-high; gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; }; --- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts +++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts @@ -80,6 +80,7 @@ regulator-name = "emac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + startup-delay-us = <20000>; enable-active-high; gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */ }; --- a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts +++ b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts @@ -79,6 +79,7 @@ regulator-name = "emac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + startup-delay-us = <20000>; enable-active-high; gpio = <&pio 0 2 GPIO_ACTIVE_HIGH>; };
Back to top | Article view | linux.kernel
csiph-web