Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1457414 > unrolled thread

[PATCH v2 5/6] mmc: dw_mmc: support inverted power control

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v2 5/6] mmc: dw_mmc: support inverted power control Shawn Lin <shawn.lin@rock-chips.com> - 2016-08-07 03:40 +0200

#1457414 — [PATCH v2 5/6] mmc: dw_mmc: support inverted power control

If DW_MMC_CARD_PWR_INVERT is set, we should configure
PWREN register on the opposite way as it means we need to
output high level from the power io to indicate the off state.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
---

Changes in v2: None

 drivers/mmc/host/dw_mmc.c | 3 +++
 drivers/mmc/host/dw_mmc.h | 1 +
 2 files changed, 4 insertions(+)

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index c35a26a..20d786c 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1281,6 +1281,9 @@ static inline void dw_mci_set_power_reg(struct dw_mci_slot *slot,
 {
 	u32 regs;
 
+	if (test_bit(DW_MMC_CARD_PWR_INVERT, &slot->flags))
+		enable = !enable;
+
 	if (enable) {
 		regs = mci_readl(slot->host, PWREN);
 		regs |= (1 << slot->id);
diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
index 9e740bc..5719fd1 100644
--- a/drivers/mmc/host/dw_mmc.h
+++ b/drivers/mmc/host/dw_mmc.h
@@ -269,6 +269,7 @@ struct dw_mci_slot {
 #define DW_MMC_CARD_NEED_INIT	1
 #define DW_MMC_CARD_NO_LOW_PWR	2
 #define DW_MMC_CARD_NO_USE_HOLD 3
+#define DW_MMC_CARD_PWR_INVERT	4
 	int			id;
 	int			sdio_id;
 };
-- 
2.3.7

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web