Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1452562 > unrolled thread
| Started by | Ross Zwisler <ross.zwisler@linux.intel.com> |
|---|---|
| First post | 2016-07-29 23:00 +0200 |
| Last post | 2016-08-08 21:40 +0200 |
| Articles | 5 — 3 participants |
Back to article view | Back to linux.kernel
[PATCH] libnvdimm, nd_blk: mask off reserved status bits Ross Zwisler <ross.zwisler@linux.intel.com> - 2016-07-29 23:00 +0200
Re: [PATCH] libnvdimm, nd_blk: mask off reserved status bits joeyli <jlee@suse.com> - 2016-08-01 08:30 +0200
[PATCH v2] libnvdimm, nd_blk: mask off reserved status bits Ross Zwisler <ross.zwisler@linux.intel.com> - 2016-08-02 20:40 +0200
Re: [PATCH v2] libnvdimm, nd_blk: mask off reserved status bits Ross Zwisler <ross.zwisler@linux.intel.com> - 2016-08-08 21:20 +0200
Re: [PATCH v2] libnvdimm, nd_blk: mask off reserved status bits Dan Williams <dan.j.williams@intel.com> - 2016-08-08 21:40 +0200
| From | Ross Zwisler <ross.zwisler@linux.intel.com> |
|---|---|
| Date | 2016-07-29 23:00 +0200 |
| Subject | [PATCH] libnvdimm, nd_blk: mask off reserved status bits |
| Message-ID | <s0n2V-1hC-17@gated-at.bofh.it> |
The "NVDIMM Block Window Driver Writer's Guide":
http://pmem.io/documents/
http://pmem.io/documents/NVDIMM_DriverWritersGuide-July-2016.pdf
defines the layout of the block window status register. For the July 2016
version of the spec linked to above, this happens in Figure 4 on page 26.
The only bits defined in this spec are bits 31, 5, 4, 2, 1 and 0. The rest
of the bits in the status register are reserved, and there is a warning
following the diagram that says:
Note: The driver cannot assume the value of the RESERVED bits in the
status register are zero. These reserved bits need to be masked off, and
the driver must avoid checking the state of those bits.
This change ensures that for hardware implementations that set these
reserved bits in the status register, the driver won't incorrectly fail the
block I/Os.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: stable@vger.kernel.org
---
drivers/acpi/nfit.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/acpi/nfit.c b/drivers/acpi/nfit.c
index 1f0e060..375c10f 100644
--- a/drivers/acpi/nfit.c
+++ b/drivers/acpi/nfit.c
@@ -1396,11 +1396,12 @@ static u32 read_blk_stat(struct nfit_blk *nfit_blk, unsigned int bw)
{
struct nfit_blk_mmio *mmio = &nfit_blk->mmio[DCR];
u64 offset = nfit_blk->stat_offset + mmio->size * bw;
+ const u32 STATUS_MASK = 0x80000037;
if (mmio->num_lines)
offset = to_interleave_offset(offset, mmio);
- return readl(mmio->addr.base + offset);
+ return readl(mmio->addr.base + offset) & STATUS_MASK;
}
static void write_blk_ctl(struct nfit_blk *nfit_blk, unsigned int bw,
--
2.9.0
[toc] | [next] | [standalone]
| From | joeyli <jlee@suse.com> |
|---|---|
| Date | 2016-08-01 08:30 +0200 |
| Message-ID | <s1eTD-2EU-3@gated-at.bofh.it> |
| In reply to | #1452562 |
Hi Ross,
On Fri, Jul 29, 2016 at 02:59:12PM -0600, Ross Zwisler wrote:
> The "NVDIMM Block Window Driver Writer's Guide":
>
> http://pmem.io/documents/
> http://pmem.io/documents/NVDIMM_DriverWritersGuide-July-2016.pdf
>
> defines the layout of the block window status register. For the July 2016
> version of the spec linked to above, this happens in Figure 4 on page 26.
>
> The only bits defined in this spec are bits 31, 5, 4, 2, 1 and 0. The rest
> of the bits in the status register are reserved, and there is a warning
> following the diagram that says:
>
> Note: The driver cannot assume the value of the RESERVED bits in the
> status register are zero. These reserved bits need to be masked off, and
> the driver must avoid checking the state of those bits.
>
> This change ensures that for hardware implementations that set these
> reserved bits in the status register, the driver won't incorrectly fail the
> block I/Os.
>
> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
> Cc: Dan Williams <dan.j.williams@intel.com>
> Cc: stable@vger.kernel.org
> ---
> drivers/acpi/nfit.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/acpi/nfit.c b/drivers/acpi/nfit.c
> index 1f0e060..375c10f 100644
> --- a/drivers/acpi/nfit.c
> +++ b/drivers/acpi/nfit.c
The drivers/acpi/nfit.c is moved to drivers/acpi/nfit/core.c
> @@ -1396,11 +1396,12 @@ static u32 read_blk_stat(struct nfit_blk *nfit_blk, unsigned int bw)
> {
> struct nfit_blk_mmio *mmio = &nfit_blk->mmio[DCR];
> u64 offset = nfit_blk->stat_offset + mmio->size * bw;
> + const u32 STATUS_MASK = 0x80000037;
>
> if (mmio->num_lines)
> offset = to_interleave_offset(offset, mmio);
>
> - return readl(mmio->addr.base + offset);
> + return readl(mmio->addr.base + offset) & STATUS_MASK;
> }
>
> static void write_blk_ctl(struct nfit_blk *nfit_blk, unsigned int bw,
> --
> 2.9.0
Other parts are good to me.
Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
Regards
Joey Lee
[toc] | [prev] | [next] | [standalone]
| From | Ross Zwisler <ross.zwisler@linux.intel.com> |
|---|---|
| Date | 2016-08-02 20:40 +0200 |
| Subject | [PATCH v2] libnvdimm, nd_blk: mask off reserved status bits |
| Message-ID | <s1MLF-8fV-63@gated-at.bofh.it> |
| In reply to | #1452562 |
The "NVDIMM Block Window Driver Writer's Guide":
http://pmem.io/documents/
http://pmem.io/documents/NVDIMM_DriverWritersGuide-July-2016.pdf
defines the layout of the block window status register. For the July 2016
version of the spec linked to above, this happens in Figure 4 on page 26.
The only bits defined in this spec are bits 31, 5, 4, 2, 1 and 0. The rest
of the bits in the status register are reserved, and there is a warning
following the diagram that says:
Note: The driver cannot assume the value of the RESERVED bits in the
status register are zero. These reserved bits need to be masked off, and
the driver must avoid checking the state of those bits.
This change ensures that for hardware implementations that set these
reserved bits in the status register, the driver won't incorrectly fail the
block I/Os.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: stable@vger.kernel.org # v4.2+
---
Changes from V1:
- Rebased onto the v4.8 merge tree. As Joey points out the ND BLK code
recently moved from drivers/acpi/nfit.c to drivers/acpi/nfit/core.c.
Since we were in the merge window for v4.8 I didn't know what to use as
a baseline, so I just used v4.7, which was apparently incorrect. Sorry
about that.
- Added Joey's reviewed-by.
For stable kernels v4.2 and beyond the v1 patch for drivers/acpi/nfit.c
applies cleanly and should be used.
---
drivers/acpi/nfit/core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c
index 8c234dd..80cc7c0 100644
--- a/drivers/acpi/nfit/core.c
+++ b/drivers/acpi/nfit/core.c
@@ -1527,11 +1527,12 @@ static u32 read_blk_stat(struct nfit_blk *nfit_blk, unsigned int bw)
{
struct nfit_blk_mmio *mmio = &nfit_blk->mmio[DCR];
u64 offset = nfit_blk->stat_offset + mmio->size * bw;
+ const u32 STATUS_MASK = 0x80000037;
if (mmio->num_lines)
offset = to_interleave_offset(offset, mmio);
- return readl(mmio->addr.base + offset);
+ return readl(mmio->addr.base + offset) & STATUS_MASK;
}
static void write_blk_ctl(struct nfit_blk *nfit_blk, unsigned int bw,
--
2.9.0
[toc] | [prev] | [next] | [standalone]
| From | Ross Zwisler <ross.zwisler@linux.intel.com> |
|---|---|
| Date | 2016-08-08 21:20 +0200 |
| Subject | Re: [PATCH v2] libnvdimm, nd_blk: mask off reserved status bits |
| Message-ID | <s3YfD-5sp-15@gated-at.bofh.it> |
| In reply to | #1455371 |
On Tue, Aug 02, 2016 at 12:26:53PM -0600, Ross Zwisler wrote:
> The "NVDIMM Block Window Driver Writer's Guide":
>
> http://pmem.io/documents/
> http://pmem.io/documents/NVDIMM_DriverWritersGuide-July-2016.pdf
>
> defines the layout of the block window status register. For the July 2016
> version of the spec linked to above, this happens in Figure 4 on page 26.
>
> The only bits defined in this spec are bits 31, 5, 4, 2, 1 and 0. The rest
> of the bits in the status register are reserved, and there is a warning
> following the diagram that says:
>
> Note: The driver cannot assume the value of the RESERVED bits in the
> status register are zero. These reserved bits need to be masked off, and
> the driver must avoid checking the state of those bits.
>
> This change ensures that for hardware implementations that set these
> reserved bits in the status register, the driver won't incorrectly fail the
> block I/Os.
>
> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
> Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
> Cc: Dan Williams <dan.j.williams@intel.com>
> Cc: stable@vger.kernel.org # v4.2+
Ping on this patch - through which tree should we merge this for v4.8-rc2?
Dan's nvdimm tree?
> ---
>
> Changes from V1:
> - Rebased onto the v4.8 merge tree. As Joey points out the ND BLK code
> recently moved from drivers/acpi/nfit.c to drivers/acpi/nfit/core.c.
> Since we were in the merge window for v4.8 I didn't know what to use as
> a baseline, so I just used v4.7, which was apparently incorrect. Sorry
> about that.
>
> - Added Joey's reviewed-by.
>
> For stable kernels v4.2 and beyond the v1 patch for drivers/acpi/nfit.c
> applies cleanly and should be used.
>
> ---
> drivers/acpi/nfit/core.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c
> index 8c234dd..80cc7c0 100644
> --- a/drivers/acpi/nfit/core.c
> +++ b/drivers/acpi/nfit/core.c
> @@ -1527,11 +1527,12 @@ static u32 read_blk_stat(struct nfit_blk *nfit_blk, unsigned int bw)
> {
> struct nfit_blk_mmio *mmio = &nfit_blk->mmio[DCR];
> u64 offset = nfit_blk->stat_offset + mmio->size * bw;
> + const u32 STATUS_MASK = 0x80000037;
>
> if (mmio->num_lines)
> offset = to_interleave_offset(offset, mmio);
>
> - return readl(mmio->addr.base + offset);
> + return readl(mmio->addr.base + offset) & STATUS_MASK;
> }
>
> static void write_blk_ctl(struct nfit_blk *nfit_blk, unsigned int bw,
> --
> 2.9.0
>
[toc] | [prev] | [next] | [standalone]
| From | Dan Williams <dan.j.williams@intel.com> |
|---|---|
| Date | 2016-08-08 21:40 +0200 |
| Subject | Re: [PATCH v2] libnvdimm, nd_blk: mask off reserved status bits |
| Message-ID | <s3Yz1-5Ay-77@gated-at.bofh.it> |
| In reply to | #1458006 |
On Mon, Aug 8, 2016 at 12:10 PM, Ross Zwisler <ross.zwisler@linux.intel.com> wrote: > On Tue, Aug 02, 2016 at 12:26:53PM -0600, Ross Zwisler wrote: >> The "NVDIMM Block Window Driver Writer's Guide": >> >> http://pmem.io/documents/ >> http://pmem.io/documents/NVDIMM_DriverWritersGuide-July-2016.pdf >> >> defines the layout of the block window status register. For the July 2016 >> version of the spec linked to above, this happens in Figure 4 on page 26. >> >> The only bits defined in this spec are bits 31, 5, 4, 2, 1 and 0. The rest >> of the bits in the status register are reserved, and there is a warning >> following the diagram that says: >> >> Note: The driver cannot assume the value of the RESERVED bits in the >> status register are zero. These reserved bits need to be masked off, and >> the driver must avoid checking the state of those bits. >> >> This change ensures that for hardware implementations that set these >> reserved bits in the status register, the driver won't incorrectly fail the >> block I/Os. >> >> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> >> Reviewed-by: Lee, Chun-Yi <jlee@suse.com> >> Cc: Dan Williams <dan.j.williams@intel.com> >> Cc: stable@vger.kernel.org # v4.2+ > > Ping on this patch - through which tree should we merge this for v4.8-rc2? > Dan's nvdimm tree? It's getting 0-day coverage on my libnvdimm-pending branch and will go to Linus at the end of the week.
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web