Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1401164 > unrolled thread
| Started by | Borislav Petkov <bp@suse.de> |
|---|---|
| First post | 2016-05-16 04:10 +0200 |
| Last post | 2016-05-16 04:10 +0200 |
| Articles | 3 — 2 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
Re: Builtin early microcode breaks s2ram v4.6-rcX Borislav Petkov <bp@suse.de> - 2016-05-16 04:10 +0200
Re: Builtin early microcode breaks s2ram v4.6-rcX Jim Bos <jim876@xs4all.nl> - 2016-05-16 04:10 +0200
Re: Builtin early microcode breaks s2ram v4.6-rcX Borislav Petkov <bp@suse.de> - 2016-05-16 04:10 +0200
| From | Borislav Petkov <bp@suse.de> |
|---|---|
| Date | 2016-05-16 04:10 +0200 |
| Subject | Re: Builtin early microcode breaks s2ram v4.6-rcX |
| Message-ID | <rzg8P-u7-51@gated-at.bofh.it> |
On Sun, May 15, 2016 at 02:16:28PM +0200, Jim Bos wrote:
> However, after suspend to ram, trying to resume results in total
> lockup of the machine: no ping, no sysrq-keys, only hard reset works.
Does it work when you add "dis_ucode_ldr" to the kernel command line?
--
Regards/Gruss,
Boris.
SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg)
--
[toc] | [next] | [standalone]
| From | Jim Bos <jim876@xs4all.nl> |
|---|---|
| Date | 2016-05-16 04:10 +0200 |
| Message-ID | <rzg8R-u7-113@gated-at.bofh.it> |
| In reply to | #1401164 |
On 05/15/2016 04:48 PM, Borislav Petkov wrote: > On Sun, May 15, 2016 at 02:16:28PM +0200, Jim Bos wrote: >> However, after suspend to ram, trying to resume results in total >> lockup of the machine: no ping, no sysrq-keys, only hard reset works. > > Does it work when you add "dis_ucode_ldr" to the kernel command line? > Yes, it boots / suspends / resumes just fine. (but no microcode updates in dmesg) Jim
[toc] | [prev] | [next] | [standalone]
| From | Borislav Petkov <bp@suse.de> |
|---|---|
| Date | 2016-05-16 04:10 +0200 |
| Message-ID | <rzg90-u7-325@gated-at.bofh.it> |
| In reply to | #1401182 |
On Sun, May 15, 2016 at 05:45:49PM +0200, Jim Bos wrote:
> Yes, it boots / suspends / resumes just fine.
> (but no microcode updates in dmesg)
Ok, I'll take a look.
Btw, is there a particular reason why you're not doing microcode updates
through the initrd? Or you're running without one?
Also, can you send me your .config. Privately is fine too.
Thanks.
--
Regards/Gruss,
Boris.
SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg)
--
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web