Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1401202 > unrolled thread

[PATCH v4 00/22] ARM: dts: exynos: Add initial support for Odroid XU

Back to article view | Back to linux.kernel

Contents

  [PATCH v4 00/22] ARM: dts: exynos: Add initial support for Odroid XU Krzysztof Kozlowski <krzk@kernel.org> - 2016-05-16 04:10 +0200
    [PATCH v4 03/22] clk: samsung: exynos5410: Add serial3, USB and PWM clocks Krzysztof Kozlowski <krzk@kernel.org> - 2016-05-16 04:10 +0200
    [PATCH v4 22/22] ARM: dts: exynos: Add RTC and I2C to Exynos5410 Krzysztof Kozlowski <krzk@kernel.org> - 2016-05-16 04:10 +0200
    [PATCH v4 16/22] ARM: dts: exynos: Add USB to Exynos5410 Krzysztof Kozlowski <krzk@kernel.org> - 2016-05-16 04:10 +0200
    [PATCH v4 07/22] ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI Krzysztof Kozlowski <krzk@kernel.org> - 2016-05-16 04:10 +0200
    [PATCH v4 13/22] ARM: dts: exynos: Enable UART3 on Exynos5410 Krzysztof Kozlowski <krzk@kernel.org> - 2016-05-16 04:10 +0200
    [PATCH v4 18/22] dt-bindings: clock: Add I2C, HSI2C and RTC clock IDs to Exynos5410 Krzysztof Kozlowski <krzk@kernel.org> - 2016-05-16 04:10 +0200
    [PATCH v4 20/22] ARM: dts: exynos: Move HSI2C nodes to exynos54xx.dtsi Krzysztof Kozlowski <krzk@kernel.org> - 2016-05-16 04:10 +0200
    [PATCH v4 05/22] ARM: dts: exynos: Use lowercase for Exynos5410 CPU node labels Krzysztof Kozlowski <krzk@kernel.org> - 2016-05-16 04:10 +0200
    [PATCH v4 21/22] ARM: dts: exynos: Add I2C, PWM and UART pinctrl to Exynos5410 Krzysztof Kozlowski <krzk@kernel.org> - 2016-05-16 04:10 +0200
    [PATCH v4 14/22] ARM: dts: exynos: MCT is not an interrupt controller and extend length of iomap Krzysztof Kozlowski <krzk@kernel.org> - 2016-05-16 04:10 +0200
    [PATCH v4 12/22] ARM: dts: exynos: Include common exynos5 in exynos5410.dtsi Krzysztof Kozlowski <krzk@kernel.org> - 2016-05-16 04:10 +0200

#1401202 — [PATCH v4 00/22] ARM: dts: exynos: Add initial support for Odroid XU

Hi,

Patchset adds necessary clocks, reorganizes existing stuff and finally
adds Odroid XU support.


Changes since v3
================
1. Get rid of 5 patches changing the fin_pll after talk with Tomasz
   Figa. The existing definition of oscillator in exynos5410.dtsi
   is preferred over solution chosen for Exynos5420.
   This simplifies also the merging strategy.
2. Add tags from Javier (tested and reviewed).

Patchset is available at my private repo @github:
https://github.com/krzk/linux.git for-next/odroid-xu-v4
(I have some more changes coming but I think it is easier for
reviewers if the patchset does not grow infinitely)


Changes since v2
================
1. Got global-ack from Stephen for the clock changes. I think merging
   everything through arm-soc might be the easiest but:
   a. In such case I will prepare a tag with clock changes,
   b. Anyway I will wait for response from Sylwester and Tomasz.
2. Applied comments from Javier and added his Reviewed-by.
3. Patch 22: added ack from Rob.
4. Minor improvements in existing patches.
5. Five new patches at the end: 23-27 (not reviewed yet).
   Some of them could be squashed with existing ones but existing
   changes got reviews. Although the final Odroid XU DTS works fine but
   in general this is still work-in-progress so I suspect it will grow.
   I am releasing it early following Linux concept. :)


Changes since v1
================
1. A lot of new patches.
2. Removed some TODO notes (eMMC 4.5 so no RCLK pin).
3. New clocks, more reorganization.
4. New common DTSI: exynos54xx.dtsi. I know, it is getting more
   and more complicated but this might help removing duplications
   and keeping everything under control.



Merging strategy
================
The clock changes can go to clock tree. ARM changes to samsung-soc tree.
Please provide me a tag with include/dt-bindings/clock commits so I can
merge it.


Best regards,
Krzysztof

Krzysztof Kozlowski (22):
  dt-bindings: clock: Add license and reformat Exynos5410 clock IDs
  dt-bindings: clock: Add PWM and USB clock IDs to Exynos5410
  clk: samsung: exynos5410: Add serial3, USB and PWM clocks
  ARM: dts: exynos: Re-order alphabetically Exynos5420 SD0/SD1 pinctrl
    nodes
  ARM: dts: exynos: Use lowercase for Exynos5410 CPU node labels
  ARM: dts: exynos: Configure Exynos5410 pinctrl for eMMC and SD card
  ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI
  ARM: dts: exynos: Move common nodes to exynos5.dtsi
  ARM: dts: exynos: Prepare for inclusion of exynos5.dtsi in
    exynos5410.dtsi
  ARM: dts: exynos: Use phandle to get parent node in exynos5250-snow
  ARM: dts: exynos: Move Exynos5250 and Exynos5420 nodes under soc
  ARM: dts: exynos: Include common exynos5 in exynos5410.dtsi
  ARM: dts: exynos: Enable UART3 on Exynos5410
  ARM: dts: exynos: MCT is not an interrupt controller and extend length
    of iomap
  ARM: dts: exynos: Move common Exynos5410/542x/5800 nodes to new DTSI
  ARM: dts: exynos: Add USB to Exynos5410
  ARM: dts: exynos: Add initial support for Odroid XU board
  dt-bindings: clock: Add I2C, HSI2C and RTC clock IDs to Exynos5410
  clk: samsung: exynos5410: Add I2C, HSI2C and RTC clocks
  ARM: dts: exynos: Move HSI2C nodes to exynos54xx.dtsi
  ARM: dts: exynos: Add I2C, PWM and UART pinctrl to Exynos5410
  ARM: dts: exynos: Add RTC and I2C to Exynos5410

 .../bindings/arm/samsung/samsung-boards.txt        |    1 +
 arch/arm/boot/dts/Makefile                         |    1 +
 arch/arm/boot/dts/exynos5.dtsi                     |  215 ++-
 arch/arm/boot/dts/exynos5250-snow-common.dtsi      |    2 +-
 arch/arm/boot/dts/exynos5250.dtsi                  | 1701 ++++++++---------
 arch/arm/boot/dts/exynos5410-odroidxu.dts          |  121 ++
 arch/arm/boot/dts/exynos5410-pinctrl.dtsi          |  210 +++
 arch/arm/boot/dts/exynos5410-smdk5410.dts          |    6 +-
 arch/arm/boot/dts/exynos5410.dtsi                  |  267 +--
 arch/arm/boot/dts/exynos5420-pinctrl.dtsi          |   12 +-
 arch/arm/boot/dts/exynos5420.dtsi                  | 1992 +++++++++-----------
 arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts    |   35 +-
 arch/arm/boot/dts/exynos5422-odroidxu3.dts         |   35 +-
 arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi    |   50 +
 arch/arm/boot/dts/exynos54xx.dtsi                  |  188 ++
 drivers/clk/samsung/clk-exynos5410.c               |   45 +
 include/dt-bindings/clock/exynos5410.h             |   73 +-
 17 files changed, 2734 insertions(+), 2220 deletions(-)
 create mode 100644 arch/arm/boot/dts/exynos5410-odroidxu.dts
 create mode 100644 arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
 create mode 100644 arch/arm/boot/dts/exynos54xx.dtsi

-- 
2.5.0

[toc] | [next] | [standalone]

#1401216 — [PATCH v4 03/22] clk: samsung: exynos5410: Add serial3, USB and PWM clocks

Just like other Exynos5 family SoCs, this one has four UARTs. Add
missing UART3 clocks to the Exynos5410 clock driver.

Add clocks for USB and PWM.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 drivers/clk/samsung/clk-exynos5410.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/drivers/clk/samsung/clk-exynos5410.c b/drivers/clk/samsung/clk-exynos5410.c
index d5d5dcabc4a9..5f892128849a 100644
--- a/drivers/clk/samsung/clk-exynos5410.c
+++ b/drivers/clk/samsung/clk-exynos5410.c
@@ -33,9 +33,11 @@
 #define SRC_CPERI1		0x4204
 #define DIV_TOP0		0x10510
 #define DIV_TOP1		0x10514
+#define DIV_FSYS0		0x10548
 #define DIV_FSYS1		0x1054c
 #define DIV_FSYS2		0x10550
 #define DIV_PERIC0		0x10558
+#define DIV_PERIC3		0x10564
 #define SRC_TOP0		0x10210
 #define SRC_TOP1		0x10214
 #define SRC_TOP2		0x10218
@@ -44,6 +46,8 @@
 #define SRC_MASK_FSYS		0x10340
 #define SRC_MASK_PERIC0		0x10350
 #define GATE_BUS_FSYS0		0x10740
+#define GATE_TOP_SCLK_FSYS	0x10840
+#define GATE_TOP_SCLK_PERIC	0x10850
 #define GATE_IP_FSYS		0x10944
 #define GATE_IP_PERIC		0x10950
 #define GATE_IP_PERIS		0x10960
@@ -71,6 +75,7 @@ PNAME(mout_kfc_p)	= { "mout_kpll", "sclk_mpll", };
 PNAME(mpll_user_p)	= { "fin_pll", "sclk_mpll", };
 PNAME(bpll_user_p)	= { "fin_pll", "sclk_bpll", };
 PNAME(mpll_bpll_p)	= { "sclk_mpll_muxed", "sclk_bpll_muxed", };
+PNAME(sclk_mpll_bpll_p)	= { "sclk_mpll_bpll", "fin_pll", };
 
 PNAME(group2_p)		= { "fin_pll", "fin_pll", "none", "none",
 			"none", "none", "sclk_mpll_bpll",
@@ -96,10 +101,14 @@ static struct samsung_mux_clock exynos5410_mux_clks[] __initdata = {
 	MUX(0, "mout_mmc0", group2_p, SRC_FSYS, 0, 4),
 	MUX(0, "mout_mmc1", group2_p, SRC_FSYS, 4, 4),
 	MUX(0, "mout_mmc2", group2_p, SRC_FSYS, 8, 4),
+	MUX(0, "mout_usbd300", sclk_mpll_bpll_p, SRC_FSYS, 28, 1),
+	MUX(0, "mout_usbd301", sclk_mpll_bpll_p, SRC_FSYS, 29, 1),
 
 	MUX(0, "mout_uart0", group2_p, SRC_PERIC0, 0, 4),
 	MUX(0, "mout_uart1", group2_p, SRC_PERIC0, 4, 4),
 	MUX(0, "mout_uart2", group2_p, SRC_PERIC0, 8, 4),
+	MUX(0, "mout_uart3", group2_p, SRC_PERIC0, 12, 4),
+	MUX(0, "mout_pwm", group2_p, SRC_PERIC0, 24, 4),
 
 	MUX(0, "mout_aclk200", mpll_bpll_p, SRC_TOP0, 12, 1),
 	MUX(0, "mout_aclk400", mpll_bpll_p, SRC_TOP0, 20, 1),
@@ -121,6 +130,11 @@ static struct samsung_div_clock exynos5410_div_clks[] __initdata = {
 	DIV(0, "aclk66_pre", "sclk_mpll_muxed", DIV_TOP1, 24, 3),
 	DIV(0, "aclk66", "aclk66_pre", DIV_TOP0, 0, 3),
 
+	DIV(0, "dout_usbphy300", "mout_usbd300", DIV_FSYS0, 16, 4),
+	DIV(0, "dout_usbphy301", "mout_usbd301", DIV_FSYS0, 20, 4),
+	DIV(0, "dout_usbd300", "mout_usbd300", DIV_FSYS0, 24, 4),
+	DIV(0, "dout_usbd301", "mout_usbd301", DIV_FSYS0, 28, 4),
+
 	DIV(0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),
 	DIV(0, "div_mmc1", "mout_mmc1", DIV_FSYS1, 16, 4),
 	DIV(0, "div_mmc2", "mout_mmc2", DIV_FSYS2, 0, 4),
@@ -137,6 +151,8 @@ static struct samsung_div_clock exynos5410_div_clks[] __initdata = {
 	DIV(0, "div_uart2", "mout_uart2", DIV_PERIC0, 8, 4),
 	DIV(0, "div_uart3", "mout_uart3", DIV_PERIC0, 12, 4),
 
+	DIV(0, "dout_pwm", "mout_pwm", DIV_PERIC3, 0, 4),
+
 	DIV(0, "aclk200", "mout_aclk200", DIV_TOP0, 12, 3),
 	DIV(0, "aclk400", "mout_aclk400", DIV_TOP0, 24, 3),
 };
@@ -155,9 +171,23 @@ static struct samsung_gate_clock exynos5410_gate_clks[] __initdata = {
 	GATE(CLK_MMC1, "sdmmc1", "aclk200", GATE_BUS_FSYS0, 13, 0, 0),
 	GATE(CLK_MMC2, "sdmmc2", "aclk200", GATE_BUS_FSYS0, 14, 0, 0),
 
+	GATE(CLK_SCLK_USBPHY301, "sclk_usbphy301", "dout_usbphy301",
+	     GATE_TOP_SCLK_FSYS, 7, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_USBPHY300, "sclk_usbphy300", "dout_usbphy300",
+	     GATE_TOP_SCLK_FSYS, 8, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_USBD300, "sclk_usbd300", "dout_usbd300",
+	     GATE_TOP_SCLK_FSYS, 9, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_USBD301, "sclk_usbd301", "dout_usbd301",
+	     GATE_TOP_SCLK_FSYS, 10, CLK_SET_RATE_PARENT, 0),
+
+	GATE(CLK_SCLK_PWM, "sclk_pwm", "dout_pwm",
+	     GATE_TOP_SCLK_PERIC, 11, CLK_SET_RATE_PARENT, 0),
+
 	GATE(CLK_UART0, "uart0", "aclk66", GATE_IP_PERIC, 0, 0, 0),
 	GATE(CLK_UART1, "uart1", "aclk66", GATE_IP_PERIC, 1, 0, 0),
 	GATE(CLK_UART2, "uart2", "aclk66", GATE_IP_PERIC, 2, 0, 0),
+	GATE(CLK_UART3, "uart3", "aclk66", GATE_IP_PERIC, 3, 0, 0),
+	GATE(CLK_PWM, "pwm", "aclk66", GATE_IP_PERIC, 24, 0, 0),
 
 	GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0",
 			SRC_MASK_PERIC0, 0, CLK_SET_RATE_PARENT, 0),
@@ -165,6 +195,12 @@ static struct samsung_gate_clock exynos5410_gate_clks[] __initdata = {
 			SRC_MASK_PERIC0, 4, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_UART2, "sclk_uart2", "div_uart2",
 			SRC_MASK_PERIC0, 8, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_UART3, "sclk_uart3", "div_uart3",
+			SRC_MASK_PERIC0, 12, CLK_SET_RATE_PARENT, 0),
+
+	GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_IP_FSYS, 18, 0, 0),
+	GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_IP_FSYS, 19, 0, 0),
+	GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_IP_FSYS, 20, 0, 0),
 };
 
 static struct samsung_pll_clock exynos5410_plls[nr_plls] __initdata = {
-- 
2.5.0

[toc] | [prev] | [next] | [standalone]

#1401224 — [PATCH v4 22/22] ARM: dts: exynos: Add RTC and I2C to Exynos5410

Configure Exynos5410-specific properties of RTC, I2C and HSI2C nodes.
This still does not enable them on the board level though.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 arch/arm/boot/dts/exynos5410.dtsi | 63 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 63 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 37bd8d419c5d..46607d88cf53 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -146,6 +146,62 @@
 	};
 };
 
+&i2c_0 {
+	clocks = <&clock CLK_I2C0>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_bus>;
+};
+
+&i2c_1 {
+	clocks = <&clock CLK_I2C1>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_bus>;
+};
+
+&i2c_2 {
+	clocks = <&clock CLK_I2C2>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_bus>;
+};
+
+&i2c_3 {
+	clocks = <&clock CLK_I2C3>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_bus>;
+};
+
+&hsi2c_4 {
+	clocks = <&clock CLK_USI0>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_hs_bus>;
+};
+
+&hsi2c_5 {
+	clocks = <&clock CLK_USI1>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_hs_bus>;
+};
+
+&hsi2c_6 {
+	clocks = <&clock CLK_USI2>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_hs_bus>;
+};
+
+&hsi2c_7 {
+	clocks = <&clock CLK_USI3>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7_hs_bus>;
+};
+
 &mct {
 	clocks = <&fin_pll>, <&clock CLK_MCT>;
 	clock-names = "fin_pll", "mct";
@@ -156,6 +212,13 @@
 	clock-names = "timers";
 };
 
+&rtc {
+	clocks = <&clock CLK_RTC>;
+	clock-names = "rtc";
+	interrupt-parent = <&pmu_system_controller>;
+	status = "disabled";
+};
+
 &serial_0 {
 	clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
 	clock-names = "uart", "clk_uart_baud0";
-- 
2.5.0

[toc] | [prev] | [next] | [standalone]

#1401232 — [PATCH v4 16/22] ARM: dts: exynos: Add USB to Exynos5410

Move USB 3.0 DWC and 2.0 EHCI/OHCI nodes from exynos5420.dtsi to
exynos54xx.dtsi common for entire family. For Exynos542x/5800 this
should not have functional impact but for Exynos5410 this effectively
adds USB support.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 arch/arm/boot/dts/exynos5410.dtsi |  39 +++++++++++
 arch/arm/boot/dts/exynos5420.dtsi | 133 +++++++++++---------------------------
 arch/arm/boot/dts/exynos54xx.dtsi |  79 ++++++++++++++++++++++
 3 files changed, 157 insertions(+), 94 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index dba6875572f2..37bd8d419c5d 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -185,4 +185,43 @@
 		  3 0 0x07000000 0x20000>;
 };
 
+&usbdrd3_0 {
+	clocks = <&clock CLK_USBD300>;
+	clock-names = "usbdrd30";
+};
+
+&usbdrd_phy0 {
+	clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbdrd3_1 {
+	clocks = <&clock CLK_USBD301>;
+	clock-names = "usbdrd30";
+};
+
+&usbdrd_phy1 {
+	clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbhost1 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usbhost2 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usb2_phy {
+	clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,sysreg-phandle = <&sysreg_system_controller>;
+	samsung,pmureg-phandle = <&pmu_system_controller>;
+};
+
 #include "exynos5410-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index ebf2ed3c5ff8..8fa65eb8027d 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -41,8 +41,6 @@
 		spi0 = &spi_0;
 		spi1 = &spi_1;
 		spi2 = &spi_2;
-		usbdrdphy0 = &usbdrd_phy0;
-		usbdrdphy1 = &usbdrd_phy1;
 	};
 
 	/*
@@ -770,98 +768,6 @@
 			clock-names = "secss";
 		};
 
-		usbdrd3_0: usb3-0 {
-			compatible = "samsung,exynos5250-dwusb3";
-			clocks = <&clock CLK_USBD300>;
-			clock-names = "usbdrd30";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			usbdrd_dwc3_0: dwc3@12000000 {
-				compatible = "snps,dwc3";
-				reg = <0x12000000 0x10000>;
-				interrupts = <0 72 0>;
-				phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
-				phy-names = "usb2-phy", "usb3-phy";
-			};
-		};
-
-		usbdrd_phy0: phy@12100000 {
-			compatible = "samsung,exynos5420-usbdrd-phy";
-			reg = <0x12100000 0x100>;
-			clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
-			clock-names = "phy", "ref";
-			samsung,pmu-syscon = <&pmu_system_controller>;
-			#phy-cells = <1>;
-		};
-
-		usbdrd3_1: usb3-1 {
-			compatible = "samsung,exynos5250-dwusb3";
-			clocks = <&clock CLK_USBD301>;
-			clock-names = "usbdrd30";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			usbdrd_dwc3_1: dwc3@12400000 {
-				compatible = "snps,dwc3";
-				reg = <0x12400000 0x10000>;
-				interrupts = <0 73 0>;
-				phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
-				phy-names = "usb2-phy", "usb3-phy";
-			};
-		};
-
-		usbdrd_phy1: phy@12500000 {
-			compatible = "samsung,exynos5420-usbdrd-phy";
-			reg = <0x12500000 0x100>;
-			clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
-			clock-names = "phy", "ref";
-			samsung,pmu-syscon = <&pmu_system_controller>;
-			#phy-cells = <1>;
-		};
-
-		usbhost2: usb@12110000 {
-			compatible = "samsung,exynos4210-ehci";
-			reg = <0x12110000 0x100>;
-			interrupts = <0 71 0>;
-
-			clocks = <&clock CLK_USBH20>;
-			clock-names = "usbhost";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				phys = <&usb2_phy 1>;
-			};
-		};
-
-		usbhost1: usb@12120000 {
-			compatible = "samsung,exynos4210-ohci";
-			reg = <0x12120000 0x100>;
-			interrupts = <0 71 0>;
-
-			clocks = <&clock CLK_USBH20>;
-			clock-names = "usbhost";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				phys = <&usb2_phy 1>;
-			};
-		};
-
-		usb2_phy: phy@12130000 {
-			compatible = "samsung,exynos5250-usb2-phy";
-			reg = <0x12130000 0x100>;
-			clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
-			clock-names = "phy", "ref";
-			#phy-cells = <1>;
-			samsung,sysreg-phandle = <&sysreg_system_controller>;
-			samsung,pmureg-phandle = <&pmu_system_controller>;
-		};
-
 		sysmmu_g2dr: sysmmu@0x10A60000 {
 			compatible = "samsung,exynos-sysmmu";
 			reg = <0x10A60000 0x1000>;
@@ -1153,4 +1059,43 @@
 	clock-names = "uart", "clk_uart_baud0";
 };
 
+&usbdrd3_0 {
+	clocks = <&clock CLK_USBD300>;
+	clock-names = "usbdrd30";
+};
+
+&usbdrd_phy0 {
+	clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbdrd3_1 {
+	clocks = <&clock CLK_USBD301>;
+	clock-names = "usbdrd30";
+};
+
+&usbdrd_phy1 {
+	clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbhost1 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usbhost2 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usb2_phy {
+	clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,sysreg-phandle = <&sysreg_system_controller>;
+	samsung,pmureg-phandle = <&pmu_system_controller>;
+};
+
 #include "exynos5420-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index 9ce625bd79c1..a9a062708237 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -20,6 +20,11 @@
 / {
 	compatible = "samsung,exynos5";
 
+	aliases {
+		usbdrdphy0 = &usbdrd_phy0;
+		usbdrdphy1 = &usbdrd_phy1;
+	};
+
 	soc: soc {
 		sysram@02020000 {
 			compatible = "mmio-sram";
@@ -64,5 +69,79 @@
 						<11 &gic 0 131 0>;
 			};
 		};
+
+		usbdrd3_0: usb3-0 {
+			compatible = "samsung,exynos5250-dwusb3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbdrd_dwc3_0: dwc3@12000000 {
+				compatible = "snps,dwc3";
+				reg = <0x12000000 0x10000>;
+				interrupts = <0 72 0>;
+				phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		usbdrd_phy0: phy@12100000 {
+			compatible = "samsung,exynos5420-usbdrd-phy";
+			reg = <0x12100000 0x100>;
+			#phy-cells = <1>;
+		};
+
+		usbdrd3_1: usb3-1 {
+			compatible = "samsung,exynos5250-dwusb3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbdrd_dwc3_1: dwc3@12400000 {
+				compatible = "snps,dwc3";
+				reg = <0x12400000 0x10000>;
+				interrupts = <0 73 0>;
+				phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		usbdrd_phy1: phy@12500000 {
+			compatible = "samsung,exynos5420-usbdrd-phy";
+			reg = <0x12500000 0x100>;
+			#phy-cells = <1>;
+		};
+
+		usbhost2: usb@12110000 {
+			compatible = "samsung,exynos4210-ehci";
+			reg = <0x12110000 0x100>;
+			interrupts = <0 71 0>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				phys = <&usb2_phy 1>;
+			};
+		};
+
+		usbhost1: usb@12120000 {
+			compatible = "samsung,exynos4210-ohci";
+			reg = <0x12120000 0x100>;
+			interrupts = <0 71 0>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				phys = <&usb2_phy 1>;
+			};
+		};
+
+		usb2_phy: phy@12130000 {
+			compatible = "samsung,exynos5250-usb2-phy";
+			reg = <0x12130000 0x100>;
+			#phy-cells = <1>;
+		};
 	};
 };
-- 
2.5.0

[toc] | [prev] | [next] | [standalone]

#1401234 — [PATCH v4 07/22] ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI

The LED nodes can be shared between Odroid XU3, XU3-Lite and XU (not yet
added) thus removing duplication.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts | 35 +----------------
 arch/arm/boot/dts/exynos5422-odroidxu3.dts      | 35 +----------------
 arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi | 50 +++++++++++++++++++++++++
 3 files changed, 52 insertions(+), 68 deletions(-)
 create mode 100644 arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi

diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
index 2ae1cf41dcb6..03fa88c45426 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
@@ -14,44 +14,11 @@
 /dts-v1/;
 #include "exynos5422-odroidxu3-common.dtsi"
 #include "exynos5422-odroidxu3-audio.dtsi"
+#include "exynos54xx-odroidxu-leds.dtsi"
 
 / {
 	model = "Hardkernel Odroid XU3 Lite";
 	compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5";
-
-	pwmleds {
-		compatible = "pwm-leds";
-
-		greenled {
-			label = "green:mmc0";
-			pwms = <&pwm 1 2000000 0>;
-			pwm-names = "pwm1";
-			/*
-			 * Green LED is much brighter than the others
-			 * so limit its max brightness
-			 */
-			max_brightness = <127>;
-			linux,default-trigger = "mmc0";
-		};
-
-		blueled {
-			label = "blue:heartbeat";
-			pwms = <&pwm 2 2000000 0>;
-			pwm-names = "pwm2";
-			max_brightness = <255>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpioleds {
-		compatible = "gpio-leds";
-		redled {
-			label = "red:microSD";
-			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc1";
-		};
-	};
 };
 
 &pwm {
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
index 432406db85de..9ed6564acfb0 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
@@ -13,44 +13,11 @@
 /dts-v1/;
 #include "exynos5422-odroidxu3-common.dtsi"
 #include "exynos5422-odroidxu3-audio.dtsi"
+#include "exynos54xx-odroidxu-leds.dtsi"
 
 / {
 	model = "Hardkernel Odroid XU3";
 	compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5";
-
-	pwmleds {
-		compatible = "pwm-leds";
-
-		greenled {
-			label = "green:mmc0";
-			pwms = <&pwm 1 2000000 0>;
-			pwm-names = "pwm1";
-			/*
-			 * Green LED is much brighter than the others
-			 * so limit its max brightness
-			 */
-			max_brightness = <127>;
-			linux,default-trigger = "mmc0";
-		};
-
-		blueled {
-			label = "blue:heartbeat";
-			pwms = <&pwm 2 2000000 0>;
-			pwm-names = "pwm2";
-			max_brightness = <255>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpioleds {
-		compatible = "gpio-leds";
-		redled {
-			label = "red:microSD";
-			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc1";
-		};
-	};
 };
 
 &i2c_0 {
diff --git a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
new file mode 100644
index 000000000000..0ed30206625c
--- /dev/null
+++ b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
@@ -0,0 +1,50 @@
+/*
+ * Hardkernel Odroid XU/XU3 LED device tree source
+ *
+ * Copyright (c) 2015,2016 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	pwmleds {
+		compatible = "pwm-leds";
+
+		greenled {
+			label = "green:mmc0";
+			pwms = <&pwm 1 2000000 0>;
+			pwm-names = "pwm1";
+			/*
+			 * Green LED is much brighter than the others
+			 * so limit its max brightness
+			 */
+			max_brightness = <127>;
+			linux,default-trigger = "mmc0";
+		};
+
+		blueled {
+			label = "blue:heartbeat";
+			pwms = <&pwm 2 2000000 0>;
+			pwm-names = "pwm2";
+			max_brightness = <255>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpioleds {
+		compatible = "gpio-leds";
+		redled {
+			label = "red:microSD";
+			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc1";
+		};
+	};
+};
-- 
2.5.0

[toc] | [prev] | [next] | [standalone]

#1401235 — [PATCH v4 13/22] ARM: dts: exynos: Enable UART3 on Exynos5410

Just like other Exynos5 family SoCs, this one has four UARTs. Configure
clocks for UART3 and enable it.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 arch/arm/boot/dts/exynos5410.dtsi | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index c8f2e4881667..0edcd7022293 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -215,7 +215,8 @@
 };
 
 &serial_3 {
-	status = "disabled";
+	clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
+	clock-names = "uart", "clk_uart_baud0";
 };
 
 &sromc {
-- 
2.5.0

[toc] | [prev] | [next] | [standalone]

#1401239 — [PATCH v4 18/22] dt-bindings: clock: Add I2C, HSI2C and RTC clock IDs to Exynos5410

Add IDs for I2C, USI (HSI2C) and RTC clocks to Exynos5410. Use the same
number as for Exynos5420 just in case in future these drivers were
merged.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 include/dt-bindings/clock/exynos5410.h | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/include/dt-bindings/clock/exynos5410.h b/include/dt-bindings/clock/exynos5410.h
index 34c8e96987a1..e94b7bbfd6af 100644
--- a/include/dt-bindings/clock/exynos5410.h
+++ b/include/dt-bindings/clock/exynos5410.h
@@ -38,9 +38,18 @@
 #define CLK_UART0		257
 #define CLK_UART1		258
 #define CLK_UART2		259
+#define CLK_I2C0		261
+#define CLK_I2C1		262
+#define CLK_I2C2		263
+#define CLK_I2C3		264
+#define CLK_USI0		265
+#define CLK_USI1		266
+#define CLK_USI2		267
+#define CLK_USI3		268
 #define CLK_UART3		260
 #define CLK_PWM			279
 #define CLK_MCT			315
+#define CLK_RTC			317
 #define CLK_MMC0		351
 #define CLK_MMC1		352
 #define CLK_MMC2		353
-- 
2.5.0

[toc] | [prev] | [next] | [standalone]

#1401246 — [PATCH v4 20/22] ARM: dts: exynos: Move HSI2C nodes to exynos54xx.dtsi

The USI/HSI2C nodes can be mostly shared between Exynos5420 and
Exynos5410 so move them to common DTSI.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 arch/arm/boot/dts/exynos5420.dtsi | 32 ++++++++++++++++++++++++++----
 arch/arm/boot/dts/exynos54xx.dtsi | 41 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 69 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 8fa65eb8027d..791243694aa5 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -29,10 +29,6 @@
 		pinctrl2 = &pinctrl_2;
 		pinctrl3 = &pinctrl_3;
 		pinctrl4 = &pinctrl_4;
-		i2c4 = &hsi2c_4;
-		i2c5 = &hsi2c_5;
-		i2c6 = &hsi2c_6;
-		i2c7 = &hsi2c_7;
 		i2c8 = &hsi2c_8;
 		i2c9 = &hsi2c_9;
 		i2c10 = &hsi2c_10;
@@ -1022,6 +1018,34 @@
 	pinctrl-0 = <&i2c3_bus>;
 };
 
+&hsi2c_4 {
+	clocks = <&clock CLK_USI0>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_hs_bus>;
+};
+
+&hsi2c_5 {
+	clocks = <&clock CLK_USI1>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_hs_bus>;
+};
+
+&hsi2c_6 {
+	clocks = <&clock CLK_USI2>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_hs_bus>;
+};
+
+&hsi2c_7 {
+	clocks = <&clock CLK_USI3>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7_hs_bus>;
+};
+
 &mct {
 	clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
 	clock-names = "fin_pll", "mct";
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index a9a062708237..317612089b50 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -21,6 +21,10 @@
 	compatible = "samsung,exynos5";
 
 	aliases {
+		i2c4 = &hsi2c_4;
+		i2c5 = &hsi2c_5;
+		i2c6 = &hsi2c_6;
+		i2c7 = &hsi2c_7;
 		usbdrdphy0 = &usbdrd_phy0;
 		usbdrdphy1 = &usbdrd_phy1;
 	};
@@ -70,6 +74,43 @@
 			};
 		};
 
+		/* i2c_0-3 are defined in exynos5.dtsi */
+		hsi2c_4: i2c@12CA0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12CA0000 0x1000>;
+			interrupts = <0 60 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hsi2c_5: i2c@12CB0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12CB0000 0x1000>;
+			interrupts = <0 61 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hsi2c_6: i2c@12CC0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12CC0000 0x1000>;
+			interrupts = <0 62 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hsi2c_7: i2c@12CD0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12CD0000 0x1000>;
+			interrupts = <0 63 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		usbdrd3_0: usb3-0 {
 			compatible = "samsung,exynos5250-dwusb3";
 			#address-cells = <1>;
-- 
2.5.0

[toc] | [prev] | [next] | [standalone]

#1401248 — [PATCH v4 05/22] ARM: dts: exynos: Use lowercase for Exynos5410 CPU node labels

For consistency lowercase node labels are used.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 arch/arm/boot/dts/exynos5410.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 7a56aec2c5ba..8de8c644f42e 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -35,28 +35,28 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x0>;
 			clock-frequency = <1600000000>;
 		};
 
-		CPU1: cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x1>;
 			clock-frequency = <1600000000>;
 		};
 
-		CPU2: cpu@2 {
+		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x2>;
 			clock-frequency = <1600000000>;
 		};
 
-		CPU3: cpu@3 {
+		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x3>;
-- 
2.5.0

[toc] | [prev] | [next] | [standalone]

#1401249 — [PATCH v4 21/22] ARM: dts: exynos: Add I2C, PWM and UART pinctrl to Exynos5410

Add pincontrol groups for HSI2C (USI), I2C, PWM and UART to Exynos5410.
This allows configuring these pins to specific functions.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 arch/arm/boot/dts/exynos5410-pinctrl.dtsi | 133 ++++++++++++++++++++++++++++++
 1 file changed, 133 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
index ddacafa1e907..b58a0f29f42c 100644
--- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
@@ -278,6 +278,139 @@
 		#interrupt-cells = <2>;
 	};
 
+	uart0_data: uart0-data {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa0-4", "gpa0-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c2_bus: i2c2-bus {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_fctl: uart2-fctl {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c3_bus: i2c3-bus {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c4_hs_bus: i2c4-hs-bus {
+		samsung,pins = "gpa2-0", "gpa2-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c5_hs_bus: i2c5-hs-bus {
+		samsung,pins = "gpa2-2", "gpa2-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c6_hs_bus: i2c6-hs-bus {
+		samsung,pins = "gpb1-3", "gpb1-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpb2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpb2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm2_out: pwm2-out {
+		samsung,pins = "gpb2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm3_out: pwm3-out {
+		samsung,pins = "gpb2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c7_hs_bus: i2c7-hs-bus {
+		samsung,pins = "gpb2-2", "gpb2-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpb3-0", "gpb3-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c1_bus: i2c1-bus {
+		samsung,pins = "gpb3-2", "gpb3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
 	sd0_clk: sd0-clk {
 		samsung,pins = "gpc0-0";
 		samsung,pin-function = <2>;
-- 
2.5.0

[toc] | [prev] | [next] | [standalone]

#1401255 — [PATCH v4 14/22] ARM: dts: exynos: MCT is not an interrupt controller and extend length of iomap

Multi-Core Timer generates interrupts but it is not really an interrupt
controller so remove the "interrupt-controller" and "interrupt-cells"
properties. Additionally extend the length of mapped memory to cover all
registers (last SFR is at 0x0A40).

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 arch/arm/boot/dts/exynos5420.dtsi | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 4b16a9376a24..872dadf0f2d4 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -263,9 +263,7 @@
 
 		mct: mct@101C0000 {
 			compatible = "samsung,exynos4210-mct";
-			reg = <0x101C0000 0x800>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
+			reg = <0x101C0000 0xB00>;
 			interrupt-parent = <&mct_map>;
 			interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
 					<8>, <9>, <10>, <11>;
-- 
2.5.0

[toc] | [prev] | [next] | [standalone]

#1401272 — [PATCH v4 12/22] ARM: dts: exynos: Include common exynos5 in exynos5410.dtsi

The exynos5.dtsi is used for common nodes shared between Exynos5250 and
Exynos542x. Since Exynos5410 is very similar to Exynos5420 it can
include the common file as well to remove duplication and make
everything more consistent.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 arch/arm/boot/dts/exynos5410-smdk5410.dts |   6 +-
 arch/arm/boot/dts/exynos5410.dtsi         | 103 ++++++++++--------------------
 2 files changed, 35 insertions(+), 74 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index 0f6429e1b75c..777fcf2edd79 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -102,14 +102,14 @@
 	};
 };
 
-&uart0 {
+&serial_0 {
 	status = "okay";
 };
 
-&uart1 {
+&serial_1 {
 	status = "okay";
 };
 
-&uart2 {
+&serial_2 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 8de8c644f42e..c8f2e4881667 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -14,6 +14,7 @@
  */
 
 #include "skeleton.dtsi"
+#include "exynos5.dtsi"
 #include "exynos-syscon-restart.dtsi"
 #include <dt-bindings/clock/exynos5410.h>
 
@@ -26,9 +27,6 @@
 		pinctrl1 = &pinctrl_1;
 		pinctrl2 = &pinctrl_2;
 		pinctrl3 = &pinctrl_3;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
 	};
 
 	cpus {
@@ -70,49 +68,6 @@
 		#size-cells = <1>;
 		ranges;
 
-		combiner: interrupt-controller@10440000 {
-			compatible = "samsung,exynos4210-combiner";
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			samsung,combiner-nr = <32>;
-			reg = <0x10440000 0x1000>;
-			interrupts =	<0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-					<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-					<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-					<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
-					<0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-					<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
-					<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-					<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
-		};
-
-		gic: interrupt-controller@10481000 {
-			compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg =	<0x10481000 0x1000>,
-				<0x10482000 0x1000>,
-				<0x10484000 0x2000>,
-				<0x10486000 0x2000>;
-			interrupts = <1 9 0xf04>;
-		};
-
-		chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
-			reg = <0x10000000 0x100>;
-		};
-
-		sromc: memory-controller@12250000 {
-			compatible = "samsung,exynos4210-srom";
-			reg = <0x12250000 0x14>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			ranges = <0 0 0x04000000 0x20000
-				  1 0 0x05000000 0x20000
-				  2 0 0x06000000 0x20000
-				  3 0 0x07000000 0x20000>;
-		};
-
 		pmu_system_controller: system-controller@10040000 {
 			compatible = "samsung,exynos5410-pmu", "syscon";
 			reg = <0x10040000 0x5000>;
@@ -236,34 +191,40 @@
 			reg = <0x03860000 0x1000>;
 			interrupts = <0 47 0>;
 		};
+	};
+};
 
-		uart0: serial@12C00000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C00000 0x100>;
-			interrupts = <0 51 0>;
-			clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
+&pwm {
+	clocks = <&clock CLK_PWM>;
+	clock-names = "timers";
+};
 
-		uart1: serial@12C10000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C10000 0x100>;
-			interrupts = <0 52 0>;
-			clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
+&serial_0 {
+	clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+	clock-names = "uart", "clk_uart_baud0";
+};
 
-		uart2: serial@12C20000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C20000 0x100>;
-			interrupts = <0 53 0>;
-			clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-	};
+&serial_1 {
+	clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+	clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_2 {
+	clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+	clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_3 {
+	status = "disabled";
+};
+
+&sromc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0 0x04000000 0x20000
+		  1 0 0x05000000 0x20000
+		  2 0 0x06000000 0x20000
+		  3 0 0x07000000 0x20000>;
 };
 
 #include "exynos5410-pinctrl.dtsi"
-- 
2.5.0

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web