Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1401893 > unrolled thread

[PATCH 4.4 54/73] pinctrl: at91-pio4: fix pull-up/down logic

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH 4.4 54/73] pinctrl: at91-pio4: fix pull-up/down logic Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-05-17 03:30 +0200

#1401893 — [PATCH 4.4 54/73] pinctrl: at91-pio4: fix pull-up/down logic

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ludovic Desroches <ludovic.desroches@atmel.com>

commit 5305a7b7e860bb40ab226bc7d58019416073948a upstream.

The default configuration of a pin is often with a value in the
pull-up/down field at chip reset. So, even if the internal logic of the
controller prevents writing a configuration with pull-up and pull-down at
the same time, we must ensure explicitly this condition before writing the
register.

This was leading to a pull-down condition not taken into account for
instance.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Fixes: 776180848b57 ("pinctrl: introduce driver for Atmel PIO4 controller")
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pinctrl/pinctrl-at91-pio4.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/pinctrl/pinctrl-at91-pio4.c
+++ b/drivers/pinctrl/pinctrl-at91-pio4.c
@@ -717,9 +717,11 @@ static int atmel_conf_pin_config_group_s
 			break;
 		case PIN_CONFIG_BIAS_PULL_UP:
 			conf |= ATMEL_PIO_PUEN_MASK;
+			conf &= (~ATMEL_PIO_PDEN_MASK);
 			break;
 		case PIN_CONFIG_BIAS_PULL_DOWN:
 			conf |= ATMEL_PIO_PDEN_MASK;
+			conf &= (~ATMEL_PIO_PUEN_MASK);
 			break;
 		case PIN_CONFIG_DRIVE_OPEN_DRAIN:
 			if (arg == 0)

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web