Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1400418 > unrolled thread

Re: [PATCH v4] x86/hpet: Reduce HPET counter read contention

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH v4] x86/hpet: Reduce HPET counter read contention Waiman Long <waiman.long@hpe.com> - 2016-05-13 01:30 +0200

#1400418 — Re: [PATCH v4] x86/hpet: Reduce HPET counter read contention

On 04/12/2016 02:46 PM, Waiman Long wrote:
> On a large system with many CPUs, using HPET as the clock source can
> have a significant impact on the overall system performance because
> of the following reasons:
>   1) There is a single HPET counter shared by all the CPUs.
>   2) HPET counter reading is a very slow operation.
>
> Using HPET as the default clock source may happen when, for example,
> the TSC clock calibration exceeds the allowable tolerance. Something
> the performance slowdown can be so severe that the system may crash
> because of a NMI watchdog soft lockup, for example.
>
> This patch attempts to reduce HPET read contention by using the fact
> that if more than one CPUs are trying to access HPET at the same time,
> it will be more efficient if one CPU in the group reads the HPET
> counter and shares it with the rest of the group instead of each
> group member reads the HPET counter individually.
>
> This is done by using a combination word with a sequence number and
> a bit lock. The CPU that gets the bit lock will be responsible for
> reading the HPET counter and update the sequence number. The others
> will monitor the change in sequence number and grab the HPET counter
> accordingly. This change is enabled on SMP configuration.
>
> On a 4-socket Haswell-EX box with 72 cores (HT off), running the
> AIM7 compute workload (1500 users) on a 4.6-rc1 kernel (HZ=1000)
> with and without the patch has the following performance numbers
> (with HPET or TSC as clock source):
>
> TSC		= 646515 jobs/min
> HPET w/o patch	= 566708 jobs/min
> HPET with patch	= 638791 jobs/min
>
> The perf profile showed a reduction of the %CPU time consumed by
> read_hpet from 4.99% without patch to 1.41% with patch.
>
> On a 16-socket IvyBridge-EX system with 240 cores (HT on), on the
> other hand, the performance numbers of the same benchmark were:
>
> TSC		= 3145329 jobs/min
> HPET w/o patch	= 1108537 jobs/min
> HPET with patch	= 3019934 jobs/min
>
> The corresponding perf profile showed a drop of CPU consumption of
> the read_hpet function from more than 34% to just 2.96%.
>
> Signed-off-by: Waiman Long<Waiman.Long@hpe.com>
> ---
>   v3->v4:
>    - Move hpet_save inside the CONFIG_SMP block to fix a compilation
>      warning in non-SMP build.
>
>   v2->v3:
>    - Make the hpet optimization the default for SMP configuration. So
>      no documentation change is needed.
>    - Remove threshold checking code as it should not be necessary and
>      can be potentially unsafe.
>
>   v1->v2:
>    - Reduce the CPU threshold to 32.
>    - Add a kernel parameter to explicitly enable or disable hpet
>      optimization.
>    - Change hpet_save.hpet type to u32 to make sure that read&  write
>      is atomic on i386.
>
>   arch/x86/kernel/hpet.c |   84 ++++++++++++++++++++++++++++++++++++++++++++++++
>   1 files changed, 84 insertions(+), 0 deletions(-)
>
>

I haven't received any feedback on this patch since mid-April. I would 
like to know if the current patch is good enough or some additional 
changes are still needed to make it merge-able upstream.

Thanks,
Longman

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web