Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1399601 > unrolled thread

[PATCH v2 2/3] ARM: dts: bcm5301x: Add I2C support to the DT

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v2 2/3] ARM: dts: bcm5301x: Add I2C support to the DT Jon Mason <jon.mason@broadcom.com> - 2016-05-12 01:20 +0200

#1399601 — [PATCH v2 2/3] ARM: dts: bcm5301x: Add I2C support to the DT

Add I2C support to the bcm5301x Device Tree.  Since no driver changes
are needed to enable this hardware, only the device tree changes are
required to make this functional.

Signed-off-by: Jon Mason <jonmason@broadcom.com>
---
 arch/arm/boot/dts/bcm5301x.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 4b9887f..ffc4a9b 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -218,6 +218,15 @@
 		};
 	};
 
+	i2c0: i2c@18009000 {
+		compatible = "brcm,iproc-i2c";
+		reg = <0x18009000 0x50>;
+		interrupts = <GIC_SPI 121 IRQ_TYPE_NONE>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <100000>;
+	};
+
 	lcpll0: lcpll0@1800c100 {
 		#clock-cells = <1>;
 		compatible = "brcm,nsp-lcpll0";
-- 
1.9.1

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web