Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1396970 > unrolled thread

[PATCH v2 1/2] dt-bindings: pci: add DT binding for Axis ARTPEC-6 PCIe controller

Back to article view | Back to linux.kernel

Contents

  [PATCH v2 1/2] dt-bindings: pci: add DT binding for Axis ARTPEC-6 PCIe controller Niklas Cassel <niklas.cassel@axis.com> - 2016-05-09 13:50 +0200
    Re: [PATCH v2 1/2] dt-bindings: pci: add DT binding for Axis  ARTPEC-6 PCIe controller Rob Herring <robh@kernel.org> - 2016-05-09 22:30 +0200

#1396970 — [PATCH v2 1/2] dt-bindings: pci: add DT binding for Axis ARTPEC-6 PCIe controller

From: Niklas Cassel <niklas.cassel@axis.com>

This commit adds the Device Tree binding documentation that allows to
describe the PCIe controller found in the Axis ARTPEC-6 SoC.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
---
Changes since v1:
 - Rename syscon node to be more descriptive

 .../devicetree/bindings/pci/axis,artpec6-pcie.txt  | 46 ++++++++++++++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt

diff --git a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
new file mode 100644
index 0000000..f91b916
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
@@ -0,0 +1,46 @@
+* Axis ARTPEC-6 PCIe interface
+
+This PCIe host controller is based on the Synopsys Designware PCIe IP
+and thus inherits all the common properties defined in designware-pcie.txt.
+
+Required properties:
+- compatible: "axis,artpec6-pcie", "snps,dw-pcie"
+- reg: base addresses and lengths of the pcie controller (DBI),
+	the phy controller, and configuration address space.
+- reg-names: Must include the following entries:
+	- "dbi"
+	- "phy"
+	- "config"
+- interrupts: A list of interrupt outputs of the controller. Must contain an
+  entry for each entry in the interrupt-names property.
+- interrupt-names: Must include the following entries:
+	- "msi": The interrupt that is asserted when an MSI is received
+- axis,syscon-pcie: A phandle pointing to the ARTPEC-6 system controller,
+	used to enable and control the Synopsys IP.
+
+Example:
+
+	pcie@f8050000 {
+		compatible = "axis,artpec6-pcie", "snps,dw-pcie";
+		reg = <0xf8050000 0x2000
+		       0xf8040000 0x1000
+		       0xc0000000 0x1000>;
+		reg-names = "dbi", "phy", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+			  /* downstream I/O */
+		ranges = <0x81000000 0 0x00010000 0xc0010000 0 0x00010000
+			  /* non-prefetchable memory */
+			  0x82000000 0 0xc0020000 0xc0020000 0 0x1ffe0000>;
+		num-lanes = <2>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+		                <0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+		                <0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+		                <0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		axis,syscon-pcie = <&syscon>;
+	};
-- 
2.1.4

[toc] | [next] | [standalone]

#1397364 — Re: [PATCH v2 1/2] dt-bindings: pci: add DT binding for Axis ARTPEC-6 PCIe controller

On Mon, May 09, 2016 at 01:48:27PM +0200, Niklas Cassel wrote:
> From: Niklas Cassel <niklas.cassel@axis.com>
> 
> This commit adds the Device Tree binding documentation that allows to
> describe the PCIe controller found in the Axis ARTPEC-6 SoC.
> 
> Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
> ---
> Changes since v1:
>  - Rename syscon node to be more descriptive
> 
>  .../devicetree/bindings/pci/axis,artpec6-pcie.txt  | 46 ++++++++++++++++++++++
>  1 file changed, 46 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt

Acked-by: Rob Herring <robh@kernel.org>

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web