Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1393312 > unrolled thread

Re: [PATCH v2 0/8] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH v2 0/8] PM / devfreq: Add NoCP devfreq-event and support  busfreq on exyno5422-odroidxu3 Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-05-03 12:30 +0200
    Re: [PATCH v2 0/8] PM / devfreq: Add NoCP devfreq-event and support  busfreq on exyno5422-odroidxu3 Chanwoo Choi <cw00.choi@samsung.com> - 2016-05-03 12:50 +0200

#1393312 — Re: [PATCH v2 0/8] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3

On Fri, Apr 15, 2016 at 03:32:47PM +0900, Chanwoo Choi wrote:
> This patchset support the AMBA bus frequency scaling on Exynos5422-based
> Odroid-XU3 board. But, this series only support the bus frequency scaling
> for INT (Internal) block using VDD_INT power line.
> 
> Also, to support the bus frequency scaling for Exynos542x SoC,
> Exynos542x SoC has the specific 'NoC (Network on Chip) Probe' device
> to measure the transfered data traffic on NoC (Network on Chip)
> instead of PPMU (Platform Performance Monitoring Unit). NoC Probe device
> provide the utilization for INT block of Exynos542x SoC.
> 
> The generic exynos-bus frequency driver uses the 'NoC Probe' devfreq-event
> device (drivers/devfreq/event/exynos-nocp.c) without any modification.
> Just add the phandle of 'NoC Probe' dt node to bus dt node.
> 
> Depend on:
> This patchset depends on patch[1] which support the generic exynos-bus
> frequency driver.
> [1] http://www.spinics.net/lists/arm-kernel/msg495976.html
> - [PATCH v9 00/20] PM / devferq: Add generic exynos bus frequency driver and new passive governor
> 
> 
> Changse from v1:
> (https://lkml.org/lkml/2016/4/8/28)
> - Simplify the documentation of exynos-nocp.txt
> - Check the return value of regmap function
> - Modify Device Tree node name using general device name
>  : nocp_memX_X@ nocp_memX_X -> nocp_memX_X@ nocp
> - Fix wrong node name about nocp device tree node
> - Drop the CLK_SET_RATE_PARENT flag
> - Reorder bus device tree node alpabetically
> - Add the tested-by tag from Anand Moon and Markus Reichl
> - Add the reviewed-by tag to patch5/7 from Exynos SoC Maintainer
> - Add patch2 to modify the devfreq_event_get_edev_by_phandle()
>   to get the instance of devfreq-event device by using the phandle
> 
> Chanwoo Choi (8):
>   PM / devfreq: event: Add new Exynos NoC probe driver
>   PM / devfreq: event: Find the instance of devfreq-event device by using phandle
>   PM / devfreq: exynos: Add the detailed correlation for Exynos5422 bus
>   ARM: dts: Add NoC Probe dt node for Exynos542x SoC
>   dt-bindings: clock: Add the clock id for ACLK clock of Exynos542x SoC
>   clk: samsung: exynos542x: Add the clock id for ACLK
>   ARM: dts: Add bus nodes using VDD_INT for Exynos542x SoC
>   ARM: dts: Add support of Bus frequency using VDD_INT for exynos5422-odroidxu3


Applied DTS patches for late v4.7 (hopefully).

Best regards,
Krzysztof

[toc] | [next] | [standalone]

#1393323

Hi Krzysztof,

On 2016년 05월 03일 19:29, Krzysztof Kozlowski wrote:
> On Fri, Apr 15, 2016 at 03:32:47PM +0900, Chanwoo Choi wrote:
>> This patchset support the AMBA bus frequency scaling on Exynos5422-based
>> Odroid-XU3 board. But, this series only support the bus frequency scaling
>> for INT (Internal) block using VDD_INT power line.
>>
>> Also, to support the bus frequency scaling for Exynos542x SoC,
>> Exynos542x SoC has the specific 'NoC (Network on Chip) Probe' device
>> to measure the transfered data traffic on NoC (Network on Chip)
>> instead of PPMU (Platform Performance Monitoring Unit). NoC Probe device
>> provide the utilization for INT block of Exynos542x SoC.
>>
>> The generic exynos-bus frequency driver uses the 'NoC Probe' devfreq-event
>> device (drivers/devfreq/event/exynos-nocp.c) without any modification.
>> Just add the phandle of 'NoC Probe' dt node to bus dt node.
>>
>> Depend on:
>> This patchset depends on patch[1] which support the generic exynos-bus
>> frequency driver.
>> [1] http://www.spinics.net/lists/arm-kernel/msg495976.html
>> - [PATCH v9 00/20] PM / devferq: Add generic exynos bus frequency driver and new passive governor
>>
>>
>> Changse from v1:
>> (https://lkml.org/lkml/2016/4/8/28)
>> - Simplify the documentation of exynos-nocp.txt
>> - Check the return value of regmap function
>> - Modify Device Tree node name using general device name
>>  : nocp_memX_X@ nocp_memX_X -> nocp_memX_X@ nocp
>> - Fix wrong node name about nocp device tree node
>> - Drop the CLK_SET_RATE_PARENT flag
>> - Reorder bus device tree node alpabetically
>> - Add the tested-by tag from Anand Moon and Markus Reichl
>> - Add the reviewed-by tag to patch5/7 from Exynos SoC Maintainer
>> - Add patch2 to modify the devfreq_event_get_edev_by_phandle()
>>   to get the instance of devfreq-event device by using the phandle
>>
>> Chanwoo Choi (8):
>>   PM / devfreq: event: Add new Exynos NoC probe driver
>>   PM / devfreq: event: Find the instance of devfreq-event device by using phandle
>>   PM / devfreq: exynos: Add the detailed correlation for Exynos5422 bus
>>   ARM: dts: Add NoC Probe dt node for Exynos542x SoC
>>   dt-bindings: clock: Add the clock id for ACLK clock of Exynos542x SoC
>>   clk: samsung: exynos542x: Add the clock id for ACLK
>>   ARM: dts: Add bus nodes using VDD_INT for Exynos542x SoC
>>   ARM: dts: Add support of Bus frequency using VDD_INT for exynos5422-odroidxu3
> 
> 
> Applied DTS patches for late v4.7 (hopefully).

Thanks for your review and apply.

Best Regards,
Chanwoo Choi

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web