Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1390881 > unrolled thread

Re: [PATCH 2/5] mtd: nand: gpmi: document the clocks and clock-names in DT property

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH 2/5] mtd: nand: gpmi: document the clocks and  clock-names in DT property Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-04-29 11:00 +0200

#1390881 — Re: [PATCH 2/5] mtd: nand: gpmi: document the clocks and clock-names in DT property

Hi Han,

On Tue, 23 Feb 2016 17:04:50 -0600
Han Xu <han.xu@nxp.com> wrote:

> add the clocks and clock-names in DT property, gpmi-io clock is
> mandatory for all platforms, but some platforms, such as i.MX6Q may
> need more extra clocks for submodules. More details please refer to the
> SoC reference manual.
> 
> Signed-off-by: Han Xu <han.xu@nxp.com>
> ---
>  Documentation/devicetree/bindings/mtd/gpmi-nand.txt | 9 +++++++++

Please make sure you add the DT maintainers (and the DT ML) in Cc when
you update DT bindings.

Best Regards,

Boris

>  1 file changed, 9 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
> index d02acaf..c8d0e2f 100644
> --- a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
> +++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
> @@ -13,6 +13,13 @@ Required properties:
>      and GPMI DMA channel ID.
>      Refer to dma.txt and fsl-mxs-dma.txt for details.
>    - dma-names: Must be "rx-tx".
> +  - clocks : The clocks needed by the gpmi controller. This field varies
> +    depends on the SoC design, "gpmi-io" is mandatory but some platforms may
> +    need several extra clocks, such as i.MX6Q, it requires "gpmi_apb,
> +    gpmi_bch, gpmi_bch_apb and per1_bch" for all submodules. Please refer to
> +    the HW design manual.
> +  - clock-names : the name of the clocks, please refer to the HW design
> +    manual.
>  
>  Optional properties:
>    - nand-on-flash-bbt: boolean to enable on flash bbt option if not
> @@ -51,6 +58,8 @@ gpmi-nand@8000c000 {
>  	interrupt-names = "bch";
>  	dmas = <&dma_apbh 4>;
>  	dma-names = "rx-tx";
> +	clocks = <&clks 50>,;
> +	clock-names = "gpmi_io";
>  
>  	partition@0 {
>  	...



-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web