Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1386796 > unrolled thread

[PATCH v3 1/2] hwmon: Define binding for the INA3221 hwmon driver

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v3 1/2] hwmon: Define binding for the INA3221 hwmon driver "Andrew F. Davis" <afd@ti.com> - 2016-04-25 21:50 +0200

#1386796 — [PATCH v3 1/2] hwmon: Define binding for the INA3221 hwmon driver

Define a binding for the INA3221 Triple Current/Voltage Monitor.

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 Documentation/devicetree/bindings/hwmon/ina3221.txt | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/ina3221.txt

diff --git a/Documentation/devicetree/bindings/hwmon/ina3221.txt b/Documentation/devicetree/bindings/hwmon/ina3221.txt
new file mode 100644
index 0000000..8ec908b
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ina3221.txt
@@ -0,0 +1,19 @@
+Texas Instruments INA3221 Triple I2C Current/Voltage Monitor
+
+Required properties:
+ - compatible		: Should be "ti,ina3221".
+ - reg			: I2C address of the device.
+
+Optional properties:
+ - shunt-resistors	: Shunt resistor values in micro-Ohms for each channel.
+
+Example:
+
+&i2c {
+	hw_monitor@40 {
+		compatible = "ti,ina3221";
+		reg = <0x40>;
+
+		shunt-resistors = <1000>, <2000>, <500>;
+	};
+};
-- 
2.8.1

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web