Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1384328 > unrolled thread

[PATCH v4 4/4] dmaengine: dw: override LLP support if asked in platform data

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v4 4/4] dmaengine: dw: override LLP support if asked in platform data Andy Shevchenko <andriy.shevchenko@linux.intel.com> - 2016-04-21 17:10 +0200

#1384328 — [PATCH v4 4/4] dmaengine: dw: override LLP support if asked in platform data

There is at least one known device, i.e. UART on Intel Galileo, that works
unreliably in case of use of multi block transfer support in DMA mode.

Override autodetection by user provided data.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/dma/dw/core.c                | 10 +++++++---
 include/linux/platform_data/dma-dw.h |  2 ++
 2 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c
index 9c7bc7a..f66d104 100644
--- a/drivers/dma/dw/core.c
+++ b/drivers/dma/dw/core.c
@@ -1571,9 +1571,13 @@ int dw_dma_probe(struct dw_dma_chip *chip)
 			dwc->block_size = pdata->block_size;
 
 			/* Check if channel supports multi block transfer */
-			channel_writel(dwc, LLP, DWC_LLP_LOC(0xffffffff));
-			dwc->nollp = DWC_LLP_LOC(channel_readl(dwc, LLP)) == 0;
-			channel_writel(dwc, LLP, 0);
+			if (pdata->is_nollp) {
+				dwc->nollp = pdata->is_nollp;
+			} else {
+				channel_writel(dwc, LLP, DWC_LLP_LOC(0xffffffff));
+				dwc->nollp = DWC_LLP_LOC(channel_readl(dwc, LLP)) == 0;
+				channel_writel(dwc, LLP, 0);
+			}
 		}
 	}
 
diff --git a/include/linux/platform_data/dma-dw.h b/include/linux/platform_data/dma-dw.h
index 192f3a2..ec7f7d3 100644
--- a/include/linux/platform_data/dma-dw.h
+++ b/include/linux/platform_data/dma-dw.h
@@ -40,6 +40,7 @@ struct dw_dma_slave {
  * @is_private: The device channels should be marked as private and not for
  *	by the general purpose DMA channel allocator.
  * @is_memcpy: The device channels do support memory-to-memory transfers.
+ * @is_nollp: The device channels does not support multi block transfers.
  * @chan_allocation_order: Allocate channels starting from 0 or 7
  * @chan_priority: Set channel priority increasing from 0 to 7 or 7 to 0.
  * @block_size: Maximum block size supported by the controller
@@ -51,6 +52,7 @@ struct dw_dma_platform_data {
 	unsigned int	nr_channels;
 	bool		is_private;
 	bool		is_memcpy;
+	bool		is_nollp;
 #define CHAN_ALLOCATION_ASCENDING	0	/* zero to seven */
 #define CHAN_ALLOCATION_DESCENDING	1	/* seven to zero */
 	unsigned char	chan_allocation_order;
-- 
2.8.0.rc3

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web