Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1381602 > unrolled thread

Re: [PATCH v4 0/3] mmc: pwrseq: convert to proper driver

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH v4 0/3] mmc: pwrseq: convert to proper driver Ulf Hansson <ulf.hansson@linaro.org> - 2016-04-18 13:30 +0200

#1381602 — Re: [PATCH v4 0/3] mmc: pwrseq: convert to proper driver

On 14 April 2016 at 15:02, Srinivas Kandagatla
<srinivas.kandagatla@linaro.org> wrote:
> Thanks for reviewing v3.
>
> This patchset aims at converting the pwrseq devices to proper in drivers,
> The issue is that on Qualcomm based platforms, most of the gpios require
> a pinctrl setup. Existing pwrseq code does not do any kind of pinctrl setup.
> So this makes the pwrseq unusable on those platfroms.
>
> Convert the pwrseq to proper drivers so that they can reuse
> common driver setup like pinctrl from drivers/base/pinctrl.c and clocks.
> This solution works much better and would make pwrseq to reuse
> all the driver setup done in the common code.
>
> Changes since v3:
>         - Add error handling for try_module_get failures, suggested by Ulf.
>
> Changes since v2: All changes suggested by Ulf
>         - Moved all the allocations/gpio_get/clk_get to probe
>         - Removed alloc and free callbacks
>         - try_get_module inside a mutex
>         - Fixed Kconfigs
>         - renamed list to pwrseq_node
>         - add mssing pdev_set_drvdata()
>
> Changes since v1:
>         - Fixed issue while building as module.
>
> Changes since RFC:
>         - Fixed issues reported by kbuild test robot.
>         - return EPROBE_DEFER from *_alloc() suggested by Ulf.
>
> Thanks,
> srini
>
> Srinivas Kandagatla (3):
>   mmc: pwrseq_simple: add to_pwrseq_simple() macro
>   mmc: pwrseq_emmc: add to_pwrseq_emmc() macro
>   mmc: pwrseq: convert to proper platform device
>
>  drivers/mmc/core/Kconfig         |  21 ++++++++
>  drivers/mmc/core/Makefile        |   4 +-
>  drivers/mmc/core/pwrseq.c        | 108 ++++++++++++++++++---------------------
>  drivers/mmc/core/pwrseq.h        |  19 ++++---
>  drivers/mmc/core/pwrseq_emmc.c   |  81 ++++++++++++++++++-----------
>  drivers/mmc/core/pwrseq_simple.c |  91 ++++++++++++++++++---------------
>  6 files changed, 185 insertions(+), 139 deletions(-)
>
> --
> 2.5.0
>

Thanks, applied for next!

Kind regards
Uffe

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web