Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1379813 > unrolled thread

[PATCH 2/3] hisi_sas: add slot_index_alloc_quirk_v2_hw()

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH 2/3] hisi_sas: add slot_index_alloc_quirk_v2_hw() John Garry <john.garry@huawei.com> - 2016-04-15 15:30 +0200
    Re: [PATCH 2/3] hisi_sas: add slot_index_alloc_quirk_v2_hw() Hannes Reinecke <hare@suse.de> - 2016-04-15 16:00 +0200

#1379813 — [PATCH 2/3] hisi_sas: add slot_index_alloc_quirk_v2_hw()

Add v2 hw custom function slot_index_alloc_quirk_v2_hw().
SAS devices should have IPTT bit0 equal to 1.

Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 4276594..f2966d8 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -465,6 +465,33 @@ static u32 hisi_sas_phy_read32(struct hisi_hba *hisi_hba,
 	return readl(regs);
 }
 
+/* This function needs to be protected from pre-emption. */
+static int
+slot_index_alloc_quirk_v2_hw(struct hisi_hba *hisi_hba, int *slot_idx,
+		       struct domain_device *device)
+{
+	unsigned int index = 0;
+	void *bitmap = hisi_hba->slot_index_tags;
+	int sata_dev = dev_is_sata(device);
+
+	while (1) {
+		index = find_next_zero_bit(bitmap, hisi_hba->slot_index_count,
+					   index);
+		if (index >= hisi_hba->slot_index_count)
+			return -SAS_QUEUE_FULL;
+		/*
+		 * SAS IPTT bit0 should be 1
+		 */
+		if (sata_dev || (index & 1))
+			break;
+		index++;
+	}
+
+	set_bit(index, bitmap);
+	*slot_idx = index;
+	return 0;
+}
+
 static void config_phy_opt_mode_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
 {
 	u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG);
@@ -2167,6 +2194,7 @@ static int hisi_sas_v2_init(struct hisi_hba *hisi_hba)
 static const struct hisi_sas_hw hisi_sas_v2_hw = {
 	.hw_init = hisi_sas_v2_init,
 	.setup_itct = setup_itct_v2_hw,
+	.slot_index_alloc = slot_index_alloc_quirk_v2_hw,
 	.sl_notify = sl_notify_v2_hw,
 	.get_wideport_bitmap = get_wideport_bitmap_v2_hw,
 	.free_device = free_device_v2_hw,
-- 
1.9.1

[toc] | [next] | [standalone]

#1379828

On 04/15/2016 03:36 PM, John Garry wrote:
> Add v2 hw custom function slot_index_alloc_quirk_v2_hw().
> SAS devices should have IPTT bit0 equal to 1.
> 
> Signed-off-by: John Garry <john.garry@huawei.com>
> ---
>  drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 28 ++++++++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 
Reviewed-by: Hannes Reinecke <hare@suse.com>

Cheers,

Hannes
-- 
Dr. Hannes Reinecke		   Teamlead Storage & Networking
hare@suse.de			               +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton
HRB 21284 (AG Nürnberg)

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web