Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1379480 > unrolled thread

[PATCH v2 0/8] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3

Back to article view | Back to linux.kernel

Contents

  [PATCH v2 0/8] PM / devfreq: Add NoCP devfreq-event and support  busfreq on exyno5422-odroidxu3 Chanwoo Choi <cw00.choi@samsung.com> - 2016-04-15 08:40 +0200
    [PATCH v2 8/8] ARM: dts: Add support of Bus frequency using VDD_INT  for exynos5422-odroidxu3 Chanwoo Choi <cw00.choi@samsung.com> - 2016-04-15 08:40 +0200
    [PATCH v2 6/8] clk: samsung: exynos542x: Add the clock id for ACLK Chanwoo Choi <cw00.choi@samsung.com> - 2016-04-15 08:40 +0200
      Re: [PATCH v2 6/8] clk: samsung: exynos542x: Add the clock id for ACLK Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-04-15 11:10 +0200
        Re: [PATCH v2 6/8] clk: samsung: exynos542x: Add the clock id for ACLK Sylwester Nawrocki <s.nawrocki@samsung.com> - 2016-04-15 18:40 +0200
    [PATCH v2 3/8] PM / devfreq: exynos: Add the detailed correlation for  Exynos5422 bus Chanwoo Choi <cw00.choi@samsung.com> - 2016-04-15 08:40 +0200
    [PATCH v2 5/8] dt-bindings: clock: Add the clock id for ACLK clock of  Exynos542x SoC Chanwoo Choi <cw00.choi@samsung.com> - 2016-04-15 08:40 +0200
    [PATCH v2 7/8] ARM: dts: Add bus nodes using VDD_INT for Exynos542x SoC Chanwoo Choi <cw00.choi@samsung.com> - 2016-04-15 08:40 +0200

#1379480 — [PATCH v2 0/8] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3

This patchset support the AMBA bus frequency scaling on Exynos5422-based
Odroid-XU3 board. But, this series only support the bus frequency scaling
for INT (Internal) block using VDD_INT power line.

Also, to support the bus frequency scaling for Exynos542x SoC,
Exynos542x SoC has the specific 'NoC (Network on Chip) Probe' device
to measure the transfered data traffic on NoC (Network on Chip)
instead of PPMU (Platform Performance Monitoring Unit). NoC Probe device
provide the utilization for INT block of Exynos542x SoC.

The generic exynos-bus frequency driver uses the 'NoC Probe' devfreq-event
device (drivers/devfreq/event/exynos-nocp.c) without any modification.
Just add the phandle of 'NoC Probe' dt node to bus dt node.

Depend on:
This patchset depends on patch[1] which support the generic exynos-bus
frequency driver.
[1] http://www.spinics.net/lists/arm-kernel/msg495976.html
- [PATCH v9 00/20] PM / devferq: Add generic exynos bus frequency driver and new passive governor


Changse from v1:
(https://lkml.org/lkml/2016/4/8/28)
- Simplify the documentation of exynos-nocp.txt
- Check the return value of regmap function
- Modify Device Tree node name using general device name
 : nocp_memX_X@ nocp_memX_X -> nocp_memX_X@ nocp
- Fix wrong node name about nocp device tree node
- Drop the CLK_SET_RATE_PARENT flag
- Reorder bus device tree node alpabetically
- Add the tested-by tag from Anand Moon and Markus Reichl
- Add the reviewed-by tag to patch5/7 from Exynos SoC Maintainer
- Add patch2 to modify the devfreq_event_get_edev_by_phandle()
  to get the instance of devfreq-event device by using the phandle

Chanwoo Choi (8):
  PM / devfreq: event: Add new Exynos NoC probe driver
  PM / devfreq: event: Find the instance of devfreq-event device by using phandle
  PM / devfreq: exynos: Add the detailed correlation for Exynos5422 bus
  ARM: dts: Add NoC Probe dt node for Exynos542x SoC
  dt-bindings: clock: Add the clock id for ACLK clock of Exynos542x SoC
  clk: samsung: exynos542x: Add the clock id for ACLK
  ARM: dts: Add bus nodes using VDD_INT for Exynos542x SoC
  ARM: dts: Add support of Bus frequency using VDD_INT for exynos5422-odroidxu3

 .../bindings/devfreq/event/exynos-nocp.txt         |  26 ++
 .../devicetree/bindings/devfreq/exynos-bus.txt     |  19 +
 arch/arm/boot/dts/exynos5420.dtsi                  | 407 +++++++++++++++++++++
 arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi |  99 +++++
 drivers/clk/samsung/clk-exynos5420.c               |  77 ++--
 drivers/devfreq/devfreq-event.c                    |   5 +
 drivers/devfreq/event/Kconfig                      |   8 +
 drivers/devfreq/event/Makefile                     |   2 +
 drivers/devfreq/event/exynos-nocp.c                | 304 +++++++++++++++
 drivers/devfreq/event/exynos-nocp.h                |  78 ++++
 include/dt-bindings/clock/exynos5420.h             |  24 +-
 11 files changed, 1018 insertions(+), 31 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt
 create mode 100644 drivers/devfreq/event/exynos-nocp.c
 create mode 100644 drivers/devfreq/event/exynos-nocp.h

-- 
1.9.1

[toc] | [next] | [standalone]

#1379482 — [PATCH v2 8/8] ARM: dts: Add support of Bus frequency using VDD_INT for exynos5422-odroidxu3

This patch adds the bus device tree nodes for INT (Internal) block
to enable the AMBA bus frequency scaling and add the NoC (Network on Chip)
Probe Device Tree node to measure the bandwidht for AMBA AXI bus.

The WCORE bus bus is parent device in INT block using VDD_INT.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
---
 arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 99 ++++++++++++++++++++++
 1 file changed, 99 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 1bd507bfa750..d32984c5ff93 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -56,6 +56,89 @@
 	};
 };
 
+&bus_wcore {
+	devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>,
+			<&nocp_mem1_0>, <&nocp_mem1_1>;
+	vdd-supply = <&buck3_reg>;
+	exynos,saturation-ratio = <100>;
+	status = "okay";
+};
+
+&bus_noc {
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_fsys_apb {
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_fsys {
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_fsys2 {
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_mfc {
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_gen {
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_peri {
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_g2d {
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_g2d_acp {
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_jpeg {
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_jpeg_apb {
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_disp1_fimd {
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_disp1 {
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_gscl_scaler {
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_mscl {
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
 &clock_audss {
 	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
 			<&clock_audss EXYNOS_MOUT_I2S>,
@@ -361,6 +444,22 @@
 	cap-sd-highspeed;
 };
 
+&nocp_mem0_0 {
+	status = "okay";
+};
+
+&nocp_mem0_1 {
+	status = "okay";
+};
+
+&nocp_mem1_0 {
+	status = "okay";
+};
+
+&nocp_mem1_1 {
+	status = "okay";
+};
+
 &pinctrl_0 {
 	hdmi_hpd_irq: hdmi-hpd-irq {
 		samsung,pins = "gpx3-7";
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1379483 — [PATCH v2 6/8] clk: samsung: exynos542x: Add the clock id for ACLK

This patch adds the clock id for ACLK clock which is source clock of AMBA AXI
Bus. This clock should be handled in Bus frequency scaling driver.

Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
---
 drivers/clk/samsung/clk-exynos5420.c | 77 ++++++++++++++++++++++--------------
 1 file changed, 47 insertions(+), 30 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index be03ed0fcb6b..92382cef9f90 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -554,8 +554,8 @@ static struct samsung_mux_clock exynos5800_mux_clks[] __initdata = {
 };
 
 static struct samsung_div_clock exynos5800_div_clks[] __initdata = {
-	DIV(0, "dout_aclk400_wcore", "mout_aclk400_wcore", DIV_TOP0, 16, 3),
-
+	DIV(CLK_DOUT_ACLK400_WCORE, "dout_aclk400_wcore",
+			"mout_aclk400_wcore", DIV_TOP0, 16, 3),
 	DIV(0, "dout_aclk550_cam", "mout_aclk550_cam",
 				DIV_TOP8, 16, 3),
 	DIV(0, "dout_aclkfl1_550_cam", "mout_aclkfl1_550_cam",
@@ -607,8 +607,8 @@ static struct samsung_mux_clock exynos5420_mux_clks[] __initdata = {
 };
 
 static struct samsung_div_clock exynos5420_div_clks[] __initdata = {
-	DIV(0, "dout_aclk400_wcore", "mout_aclk400_wcore_bpll",
-			DIV_TOP0, 16, 3),
+	DIV(CLK_DOUT_ACLK400_WCORE, "dout_aclk400_wcore",
+			"mout_aclk400_wcore_bpll", DIV_TOP0, 16, 3),
 };
 
 static struct samsung_mux_clock exynos5x_mux_clks[] __initdata = {
@@ -785,31 +785,47 @@ static struct samsung_div_clock exynos5x_div_clks[] __initdata = {
 	DIV(0, "div_kfc", "mout_kfc", DIV_KFC0, 0, 3),
 	DIV(0, "sclk_kpll", "mout_kpll", DIV_KFC0, 24, 3),
 
-	DIV(0, "dout_aclk400_isp", "mout_aclk400_isp", DIV_TOP0, 0, 3),
-	DIV(0, "dout_aclk400_mscl", "mout_aclk400_mscl", DIV_TOP0, 4, 3),
-	DIV(0, "dout_aclk200", "mout_aclk200", DIV_TOP0, 8, 3),
-	DIV(0, "dout_aclk200_fsys2", "mout_aclk200_fsys2", DIV_TOP0, 12, 3),
-	DIV(0, "dout_aclk100_noc", "mout_aclk100_noc", DIV_TOP0, 20, 3),
-	DIV(0, "dout_pclk200_fsys", "mout_pclk200_fsys", DIV_TOP0, 24, 3),
-	DIV(0, "dout_aclk200_fsys", "mout_aclk200_fsys", DIV_TOP0, 28, 3),
-
-	DIV(0, "dout_aclk333_432_gscl", "mout_aclk333_432_gscl",
-			DIV_TOP1, 0, 3),
-	DIV(0, "dout_aclk333_432_isp", "mout_aclk333_432_isp",
-			DIV_TOP1, 4, 3),
-	DIV(0, "dout_aclk66", "mout_aclk66", DIV_TOP1, 8, 6),
-	DIV(0, "dout_aclk333_432_isp0", "mout_aclk333_432_isp0",
-			DIV_TOP1, 16, 3),
-	DIV(0, "dout_aclk266", "mout_aclk266", DIV_TOP1, 20, 3),
-	DIV(0, "dout_aclk166", "mout_aclk166", DIV_TOP1, 24, 3),
-	DIV(0, "dout_aclk333", "mout_aclk333", DIV_TOP1, 28, 3),
-
-	DIV(0, "dout_aclk333_g2d", "mout_aclk333_g2d", DIV_TOP2, 8, 3),
-	DIV(0, "dout_aclk266_g2d", "mout_aclk266_g2d", DIV_TOP2, 12, 3),
-	DIV(0, "dout_aclk_g3d", "mout_aclk_g3d", DIV_TOP2, 16, 3),
-	DIV(0, "dout_aclk300_jpeg", "mout_aclk300_jpeg", DIV_TOP2, 20, 3),
-	DIV(0, "dout_aclk300_disp1", "mout_aclk300_disp1", DIV_TOP2, 24, 3),
-	DIV(0, "dout_aclk300_gscl", "mout_aclk300_gscl", DIV_TOP2, 28, 3),
+	DIV(CLK_DOUT_ACLK400_ISP, "dout_aclk400_isp", "mout_aclk400_isp",
+			DIV_TOP0, 0, 3),
+	DIV(CLK_DOUT_ACLK400_MSCL, "dout_aclk400_mscl", "mout_aclk400_mscl",
+			DIV_TOP0, 4, 3),
+	DIV(CLK_DOUT_ACLK200, "dout_aclk200", "mout_aclk200",
+			DIV_TOP0, 8, 3),
+	DIV(CLK_DOUT_ACLK200_FSYS2, "dout_aclk200_fsys2", "mout_aclk200_fsys2",
+			DIV_TOP0, 12, 3),
+	DIV(CLK_DOUT_ACLK100_NOC, "dout_aclk100_noc", "mout_aclk100_noc",
+			DIV_TOP0, 20, 3),
+	DIV(CLK_DOUT_PCLK200_FSYS, "dout_pclk200_fsys", "mout_pclk200_fsys",
+			DIV_TOP0, 24, 3),
+	DIV(CLK_DOUT_ACLK200_FSYS, "dout_aclk200_fsys", "mout_aclk200_fsys",
+			DIV_TOP0, 28, 3),
+	DIV(CLK_DOUT_ACLK333_432_GSCL, "dout_aclk333_432_gscl",
+			"mout_aclk333_432_gscl", DIV_TOP1, 0, 3),
+	DIV(CLK_DOUT_ACLK333_432_ISP, "dout_aclk333_432_isp",
+			"mout_aclk333_432_isp", DIV_TOP1, 4, 3),
+	DIV(CLK_DOUT_ACLK66, "dout_aclk66", "mout_aclk66",
+			DIV_TOP1, 8, 6),
+	DIV(CLK_DOUT_ACLK333_432_ISP0, "dout_aclk333_432_isp0",
+			"mout_aclk333_432_isp0", DIV_TOP1, 16, 3),
+	DIV(CLK_DOUT_ACLK266, "dout_aclk266", "mout_aclk266",
+			DIV_TOP1, 20, 3),
+	DIV(CLK_DOUT_ACLK166, "dout_aclk166", "mout_aclk166",
+			DIV_TOP1, 24, 3),
+	DIV(CLK_DOUT_ACLK333, "dout_aclk333", "mout_aclk333",
+			DIV_TOP1, 28, 3),
+
+	DIV(CLK_DOUT_ACLK333_G2D, "dout_aclk333_g2d", "mout_aclk333_g2d",
+			DIV_TOP2, 8, 3),
+	DIV(CLK_DOUT_ACLK266_G2D, "dout_aclk266_g2d", "mout_aclk266_g2d",
+			DIV_TOP2, 12, 3),
+	DIV(CLK_DOUT_ACLK_G3D, "dout_aclk_g3d", "mout_aclk_g3d", DIV_TOP2,
+			16, 3),
+	DIV(CLK_DOUT_ACLK300_JPEG, "dout_aclk300_jpeg", "mout_aclk300_jpeg",
+			DIV_TOP2, 20, 3),
+	DIV(CLK_DOUT_ACLK300_DISP1, "dout_aclk300_disp1",
+			"mout_aclk300_disp1", DIV_TOP2, 24, 3),
+	DIV(CLK_DOUT_ACLK300_GSCL, "dout_aclk300_gscl", "mout_aclk300_gscl",
+			DIV_TOP2, 28, 3),
 
 	/* DISP1 Block */
 	DIV(0, "dout_fimd1", "mout_fimd1_final", DIV_DISP10, 0, 4),
@@ -817,7 +833,8 @@ static struct samsung_div_clock exynos5x_div_clks[] __initdata = {
 	DIV(0, "dout_dp1", "mout_dp1", DIV_DISP10, 24, 4),
 	DIV(CLK_DOUT_PIXEL, "dout_hdmi_pixel", "mout_pixel", DIV_DISP10, 28, 4),
 	DIV(0, "dout_disp1_blk", "aclk200_disp1", DIV2_RATIO0, 16, 2),
-	DIV(0, "dout_aclk400_disp1", "mout_aclk400_disp1", DIV_TOP2, 4, 3),
+	DIV(CLK_DOUT_ACLK400_DISP1, "dout_aclk400_disp1",
+			"mout_aclk400_disp1", DIV_TOP2, 4, 3),
 
 	/* Audio Block */
 	DIV(0, "dout_maudio0", "mout_maudio0", DIV_MAU, 20, 4),
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1379572 — Re: [PATCH v2 6/8] clk: samsung: exynos542x: Add the clock id for ACLK

On 04/15/2016 08:32 AM, Chanwoo Choi wrote:
> This patch adds the clock id for ACLK clock which is source clock of AMBA AXI
> Bus. This clock should be handled in Bus frequency scaling driver.
> 
> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Cc: Tomasz Figa <tomasz.figa@gmail.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Tested-by: Markus Reichl <m.reichl@fivetechno.de>
> Tested-by: Anand Moon <linux.amoon@gmail.com>
> ---
>  drivers/clk/samsung/clk-exynos5420.c | 77 ++++++++++++++++++++++--------------
>  1 file changed, 47 insertions(+), 30 deletions(-)
> 

Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Best regards,
Krzysztof

[toc] | [prev] | [next] | [standalone]

#1379995 — Re: [PATCH v2 6/8] clk: samsung: exynos542x: Add the clock id for ACLK

On 04/15/2016 11:05 AM, Krzysztof Kozlowski wrote:
> On 04/15/2016 08:32 AM, Chanwoo Choi wrote:
>> This patch adds the clock id for ACLK clock which is source clock of AMBA AXI
>> Bus. This clock should be handled in Bus frequency scaling driver.
>>
>> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
>> Cc: Tomasz Figa <tomasz.figa@gmail.com>
>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>> Tested-by: Markus Reichl <m.reichl@fivetechno.de>
>> Tested-by: Anand Moon <linux.amoon@gmail.com>
>> ---
>>  drivers/clk/samsung/clk-exynos5420.c | 77 ++++++++++++++++++++++--------------
>>  1 file changed, 47 insertions(+), 30 deletions(-)
> 
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

I applied patches 5/8 and 6/8 onto a stable topic branch. Below are
details if they need to be pulled into any other subsystem tree.


The following changes since commit f55532a0c0b8bb6148f4e07853b876ef73bc69ca:

  Linux 4.6-rc1 (2016-03-26 16:03:24 -0700)

are available in the git repository at:

  git://linuxtv.org/snawrocki/samsung.git tags/clk-v4.7-exynos542x

for you to fetch changes up to 81fed6e342c04a4ecb0650c914d24bd57c6c168f:

  clk: samsung: exynos542x: Add the clock id for ACLK (2016-04-15 18:13:45 +0200)

----------------------------------------------------------------
Addition of IDs for Exynos542x SoC AMBA AXI bus clocks.

----------------------------------------------------------------
Chanwoo Choi (2):
      dt-bindings: clock: Add the clock id for ACLK clock of Exynos542x SoC
      clk: samsung: exynos542x: Add the clock id for ACLK

 drivers/clk/samsung/clk-exynos5420.c   | 77
+++++++++++++++++++++++++++++++++++++++++++++++------------------------------
 include/dt-bindings/clock/exynos5420.h | 24 +++++++++++++++++++++++-
 2 files changed, 70 insertions(+), 31 deletions(-)

-- 
Regards,
Sylwester

[toc] | [prev] | [next] | [standalone]

#1379484 — [PATCH v2 3/8] PM / devfreq: exynos: Add the detailed correlation for Exynos5422 bus

This patch adds the detailed corrleation between sub-blocks and power line
for Exynos5422.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 .../devicetree/bindings/devfreq/exynos-bus.txt        | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
index 7dbd4abfca33..d3ec8e676b6b 100644
--- a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
+++ b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
@@ -104,6 +104,25 @@ Detailed correlation between sub-blocks and power line according to Exynos SoC:
 		|--- LCD0
 		|--- ISP
 
+- In case of Exynos5422, there are two power line as following:
+	VDD_MIF |--- DREX 0 (parent device, DRAM EXpress controller)
+	        |--- DREX 1
+
+	VDD_INT |--- NoC_Core (parent device)
+		|--- G2D
+		|--- G3D
+		|--- DISP1
+		|--- NoC_WCORE
+		|--- GSCL
+		|--- MSCL
+		|--- ISP
+		|--- MFC
+		|--- GEN
+		|--- PERIS
+		|--- PERIC
+		|--- FSYS
+		|--- FSYS2
+
 Example1:
 	Show the AXI buses of Exynos3250 SoC. Exynos3250 divides the buses to
 	power line (regulator). The MIF (Memory Interface) AXI bus is used to
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1379486 — [PATCH v2 5/8] dt-bindings: clock: Add the clock id for ACLK clock of Exynos542x SoC

This patch adds the clock id for ACLK clock of Exynos542x SoC. ACLK clock mean
the source clock of AMBA AXI bus. This clock id should be used for Bus
frequency scaling.

Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 include/dt-bindings/clock/exynos5420.h | 24 +++++++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)

diff --git a/include/dt-bindings/clock/exynos5420.h b/include/dt-bindings/clock/exynos5420.h
index 7699ee9c16c0..17ab8394bec7 100644
--- a/include/dt-bindings/clock/exynos5420.h
+++ b/include/dt-bindings/clock/exynos5420.h
@@ -217,8 +217,30 @@
 
 /* divider clocks */
 #define CLK_DOUT_PIXEL		768
+#define CLK_DOUT_ACLK400_WCORE	769
+#define CLK_DOUT_ACLK400_ISP	770
+#define CLK_DOUT_ACLK400_MSCL	771
+#define CLK_DOUT_ACLK200	772
+#define CLK_DOUT_ACLK200_FSYS2	773
+#define CLK_DOUT_ACLK100_NOC	774
+#define CLK_DOUT_PCLK200_FSYS	775
+#define CLK_DOUT_ACLK200_FSYS	776
+#define CLK_DOUT_ACLK333_432_GSCL	777
+#define CLK_DOUT_ACLK333_432_ISP	778
+#define CLK_DOUT_ACLK66		779
+#define CLK_DOUT_ACLK333_432_ISP0	780
+#define CLK_DOUT_ACLK266	781
+#define CLK_DOUT_ACLK166	782
+#define CLK_DOUT_ACLK333	783
+#define CLK_DOUT_ACLK333_G2D	784
+#define CLK_DOUT_ACLK266_G2D	785
+#define CLK_DOUT_ACLK_G3D	786
+#define CLK_DOUT_ACLK300_JPEG	787
+#define CLK_DOUT_ACLK300_DISP1	788
+#define CLK_DOUT_ACLK300_GSCL	789
+#define CLK_DOUT_ACLK400_DISP1	790
 
 /* must be greater than maximal clock id */
-#define CLK_NR_CLKS		769
+#define CLK_NR_CLKS		791
 
 #endif /* _DT_BINDINGS_CLOCK_EXYNOS_5420_H */
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1379487 — [PATCH v2 7/8] ARM: dts: Add bus nodes using VDD_INT for Exynos542x SoC

This patch adds the AMBA bus nodes using VDD_INT for Exynos542x SoC.
Exynos542x has the following AMBA buses to translate data between
DRAM and sub-blocks.

Following list specifies the detailed correlation between sub-block and clock:
- CLK_DOUT_ACLK400_WCORE clock for WCORE's AXI
- CLK_DOUT_ACLK100_NOC for NoC (Network on Chip)'s AXI
- CLK_DOUT_PCLK200_FSYS for FSYS's APB
- CLK_DOUT_ACLK200_FSYS for FSYS's AXI
- CLK_DOUT_ACLK200_FSYS2 for FSYS2's AXI
- CLK_DOUT_ACLK333 for MFC's AXI
- CLK_DOUT_ACLK266 for GEN's AXI
- CLK_DOUT_ACLK66 for PERIC/PERIR's AXI
- CLK_DOUT_ACLK333_G2D for G2D's AXI
- CLK_DOUT_ACLK266_G2D for ACP's AXI
- CLK_DOUT_ACLK300_JPEG for JPEG's AXI
- CLK_DOUT_ACLK166 for JPEG's APB
- CLK_DOUT_ACLK300_DISP1 for FIMD's AXI
- CLK_DOUT_ACLK400_DISP1 for DISP1's AXI
- CLK_DOUT_ACLK300_GSCL for GSCL Scaler's AXI
- CLK_DOUT_ACLK400_MSCL for MSCL's AXI

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 arch/arm/boot/dts/exynos5420.dtsi | 371 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 371 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 63f84df73c53..18888b5d2f8c 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -1224,6 +1224,377 @@
 		power-domains = <&disp_pd>;
 		#iommu-cells = <0>;
 	};
+
+	bus_wcore: bus_wcore {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_wcore_opp_table>;
+		status = "disabled";
+	};
+
+	bus_noc: bus_noc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK100_NOC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_noc_opp_table>;
+		status = "disabled";
+	};
+
+	bus_fsys_apb: bus_fsys_apb {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_fsys_apb_opp_table>;
+		status = "disabled";
+	};
+
+	bus_fsys: bus_fsys {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_fsys_apb_opp_table>;
+		status = "disabled";
+	};
+
+	bus_fsys2: bus_fsys2 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_fsys2_opp_table>;
+		status = "disabled";
+	};
+
+	bus_mfc: bus_mfc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK333>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_mfc_opp_table>;
+		status = "disabled";
+	};
+
+	bus_gen: bus_gen {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK266>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_gen_opp_table>;
+		status = "disabled";
+	};
+
+	bus_peri: bus_peri {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK66>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_peri_opp_table>;
+		status = "disabled";
+	};
+
+	bus_g2d: bus_g2d {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK333_G2D>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_g2d_opp_table>;
+		status = "disabled";
+	};
+
+	bus_g2d_acp: bus_g2d_acp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK266_G2D>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_g2d_acp_opp_table>;
+		status = "disabled";
+	};
+
+	bus_jpeg: bus_jpeg {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_jpeg_opp_table>;
+		status = "disabled";
+	};
+
+	bus_jpeg_apb: bus_jpeg_apb {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK166>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_jpeg_apb_opp_table>;
+		status = "disabled";
+	};
+
+	bus_disp1_fimd: bus_disp1_fimd {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_disp1_fimd_opp_table>;
+		status = "disabled";
+	};
+
+	bus_disp1: bus_disp1 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_disp1_opp_table>;
+		status = "disabled";
+	};
+
+	bus_gscl_scaler: bus_gscl_scaler {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_gscl_opp_table>;
+		status = "disabled";
+	};
+
+	bus_mscl: bus_mscl {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_mscl_opp_table>;
+		status = "disabled";
+	};
+
+	bus_wcore_opp_table: opp_table2 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <84000000>;
+			opp-microvolt = <925000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <111000000>;
+			opp-microvolt = <950000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <222000000>;
+			opp-microvolt = <950000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <333000000>;
+			opp-microvolt = <950000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <987500>;
+		};
+	};
+
+	bus_noc_opp_table: opp_table3 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <67000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <75000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <86000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+	};
+
+	bus_fsys_apb_opp_table: opp_table4 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+	};
+
+	bus_fsys2_opp_table: opp_table5 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <75000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <150000000>;
+		};
+	};
+
+	bus_mfc_opp_table: opp_table6 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <96000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <111000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <167000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <222000000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <333000000>;
+		};
+	};
+
+	bus_gen_opp_table: opp_table7 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <89000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <133000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <178000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <267000000>;
+		};
+	};
+
+	bus_peri_opp_table: opp_table8 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <67000000>;
+		};
+	};
+
+	bus_g2d_opp_table: opp_table9 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <84000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <167000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <222000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <300000000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <333000000>;
+		};
+	};
+
+	bus_g2d_acp_opp_table: opp_table10 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <67000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <133000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <178000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <267000000>;
+		};
+	};
+
+	bus_jpeg_opp_table: opp_table11 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <75000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <150000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <300000000>;
+		};
+	};
+
+	bus_jpeg_apb_opp_table: opp_table12 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <84000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <111000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <134000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <167000000>;
+		};
+	};
+
+	bus_disp1_fimd_opp_table: opp_table13 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <120000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+	};
+
+	bus_disp1_opp_table: opp_table14 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <120000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <300000000>;
+		};
+	};
+
+	bus_gscl_opp_table: opp_table15 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <150000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <300000000>;
+		};
+	};
+
+	bus_mscl_opp_table: opp_table16 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <84000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <167000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <222000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <333000000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <400000000>;
+		};
+	};
 };
 
 &dp {
-- 
1.9.1

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web