Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1378933 > unrolled thread

Re: [PATCH] Add EDAC peripheral init functions & Ethernet EDAC.

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH] Add EDAC peripheral init functions & Ethernet EDAC. Rob Herring <robh@kernel.org> - 2016-04-14 16:40 +0200
    Re: [PATCH] Add EDAC peripheral init functions & Ethernet EDAC. Mauro Carvalho Chehab <m.chehab@samsung.com> - 2016-04-15 12:00 +0200

#1378933 — Re: [PATCH] Add EDAC peripheral init functions & Ethernet EDAC.

On Tue, Apr 12, 2016 at 05:12:55PM -0500, tthayer@opensource.altera.com wrote:
> This patch set adds the memory initialization functions for Altera's
> Arria10 peripherals, the first of which is the Ethernet EDAC. The
> first 3 patches add the memory initialization functionality. The
> last 3 patches add Ethernet EDAC support.

The ethernet part seems a bit strange to me to put under EDAC as EDAC 
is primarily memory controller ECC (and caches to some extent). Also you 
would not halt the system in case of an UC, but rather just drop the 
frame. This would need to be part of the ethernet driver in that case.
 
Of course, given that ethernet frames already have a CRC, ECC of the 
FIFO seems a bit redundant.

Rob

[toc] | [next] | [standalone]

#1379655

Em Thu, 14 Apr 2016 09:35:01 -0500
Rob Herring <robh@kernel.org> escreveu:

> On Tue, Apr 12, 2016 at 05:12:55PM -0500, tthayer@opensource.altera.com wrote:
> > This patch set adds the memory initialization functions for Altera's
> > Arria10 peripherals, the first of which is the Ethernet EDAC. The
> > first 3 patches add the memory initialization functionality. The
> > last 3 patches add Ethernet EDAC support.  
> 
> The ethernet part seems a bit strange to me to put under EDAC as EDAC 
> is primarily memory controller ECC (and caches to some extent). Also you 
> would not halt the system in case of an UC, but rather just drop the 
> frame. This would need to be part of the ethernet driver in that case.
>  
> Of course, given that ethernet frames already have a CRC, ECC of the 
> FIFO seems a bit redundant.

Actually, EDAC was conceived to be a way to report hardware errors, and,
although the main use case is for memory and CPU errors, there are a few
drivers that report errors at PCI bus. So, I don't see much problems using
it to report other hardware errors, like the ones associated with the
Ethernet hardware.

That's said, things like Ethernet frame errors are better handled via the
network drivers. I would report via EDAC only errors associated with the
Ethernet hardware that would cause the hardware to malfunction.

Btw, an UC error won't cause the system to halt, except if a UC memory
error happens and the EDAC core is loaded with an special modprobe
parameter (edac_mc_panic_on_ue = 1).

-- 
Thanks,
Mauro

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web