Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1369905 > unrolled thread

[PATCH v2 08/16] arm64: dts: hikey: enable i2c0 and i2c1 for working with mezzanine boards

Started byGuodong Xu <guodong.xu@linaro.org>
First post2016-04-02 11:40 +0200
Last post2016-04-04 07:20 +0200
Articles 2 — 2 participants

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  [PATCH v2 08/16] arm64: dts: hikey: enable i2c0 and i2c1 for working with mezzanine boards Guodong Xu <guodong.xu@linaro.org> - 2016-04-02 11:40 +0200
    Re: [PATCH v2 08/16] arm64: dts: hikey: enable i2c0 and i2c1 for  working with mezzanine boards Rob Herring <robh@kernel.org> - 2016-04-04 07:20 +0200

#1369905 — [PATCH v2 08/16] arm64: dts: hikey: enable i2c0 and i2c1 for working with mezzanine boards

FromGuodong Xu <guodong.xu@linaro.org>
Date2016-04-02 11:40 +0200
Subject[PATCH v2 08/16] arm64: dts: hikey: enable i2c0 and i2c1 for working with mezzanine boards
Message-ID<rjqca-1I3-33@gated-at.bofh.it>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
---
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 5c9ee31..e00e9ec 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -42,6 +42,15 @@
 		      <0x00000000 0x06e00000 0x00000000 0x0060f000>,
 		      <0x00000000 0x07410000 0x00000000 0x36bf0000>;
 	};
+
+	soc {
+		i2c0: i2c@f7100000 {
+			status = "ok";
+		};
+		i2c1: i2c@f7101000 {
+			status = "ok";
+		};
+	};
 };
 
 &uart2 {
-- 
1.9.1

[toc] | [next] | [standalone]


#1370361 — Re: [PATCH v2 08/16] arm64: dts: hikey: enable i2c0 and i2c1 for working with mezzanine boards

FromRob Herring <robh@kernel.org>
Date2016-04-04 07:20 +0200
SubjectRe: [PATCH v2 08/16] arm64: dts: hikey: enable i2c0 and i2c1 for working with mezzanine boards
Message-ID<rk55F-6H0-41@gated-at.bofh.it>
In reply to#1369905
On Sat, Apr 02, 2016 at 05:29:35PM +0800, Guodong Xu wrote:
> Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
> ---
>  arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> index 5c9ee31..e00e9ec 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> @@ -42,6 +42,15 @@
>  		      <0x00000000 0x06e00000 0x00000000 0x0060f000>,
>  		      <0x00000000 0x07410000 0x00000000 0x36bf0000>;
>  	};
> +
> +	soc {
> +		i2c0: i2c@f7100000 {
> +			status = "ok";
> +		};
> +		i2c1: i2c@f7101000 {
> +			status = "ok";
> +		};

Do these go to LS connector? If so, add 'label = "LS-I2C0";' or LS-I2C1 
as appropriate (based on LS connector numbering).

Rob

[toc] | [prev] | [standalone]


Back to top | Article view | linux.kernel


csiph-web