Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1369904 > unrolled thread

[PATCH v2 16/16] arm64: dts: add wifi nodes support for hi6220-hikey

Started byGuodong Xu <guodong.xu@linaro.org>
First post2016-04-02 11:40 +0200
Last post2016-04-02 11:40 +0200
Articles 1 — 1 participant

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  [PATCH v2 16/16] arm64: dts: add wifi nodes support for hi6220-hikey Guodong Xu <guodong.xu@linaro.org> - 2016-04-02 11:40 +0200

#1369904 — [PATCH v2 16/16] arm64: dts: add wifi nodes support for hi6220-hikey

FromGuodong Xu <guodong.xu@linaro.org>
Date2016-04-02 11:40 +0200
Subject[PATCH v2 16/16] arm64: dts: add wifi nodes support for hi6220-hikey
Message-ID<rjqca-1I3-27@gated-at.bofh.it>
Add wifi nodes support for hi6220-hikey

Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
---
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 30 ++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index a6dffa8..78ce994 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -48,6 +48,7 @@
 		i2c0: i2c@f7100000 {
 			status = "ok";
 		};
+
 		i2c1: i2c@f7101000 {
 			status = "ok";
 		};
@@ -63,6 +64,35 @@
 		uart3: uart@f7113000 {
 			status = "ok";
 		};
+
+		dwmmc_2: dwmmc2@f723f000 {
+			ti,non-removable;
+			non-removable;
+			/* WL_EN */
+			vmmc-supply = <&wlan_en_reg>;
+
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			wlcore: wlcore@2 {
+				compatible = "ti,wl1835";
+				reg = <2>;	/* sdio func num */
+				/* WL_IRQ, WL_HOST_WAKE_GPIO1_3 */
+				interrupt-parent = <&gpio1>;
+				interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+
+		wlan_en_reg: fixedregulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "wlan-en-regulator";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			/* WLAN_EN GPIO */
+			gpio = <&gpio0 5 0>;
+			/* WLAN card specific delay */
+			startup-delay-us = <70000>;
+			enable-active-high;
+		};
 	};
 
 	leds {
-- 
1.9.1

[toc] | [standalone]


Back to top | Article view | linux.kernel


csiph-web