Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1367767 > unrolled thread

[PATCH v4 1/9] ARM: dts: Add initial pin configuration for exynos3250-rinato

Started byChanwoo Choi <cw00.choi@samsung.com>
First post2016-03-31 04:50 +0200
Last post2016-03-31 06:50 +0200
Articles 2 — 2 participants

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  [PATCH v4 1/9] ARM: dts: Add initial pin configuration for  exynos3250-rinato Chanwoo Choi <cw00.choi@samsung.com> - 2016-03-31 04:50 +0200
    Re: [PATCH v4 1/9] ARM: dts: Add initial pin configuration for  exynos3250-rinato Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-03-31 06:50 +0200

#1367767 — [PATCH v4 1/9] ARM: dts: Add initial pin configuration for exynos3250-rinato

FromChanwoo Choi <cw00.choi@samsung.com>
Date2016-03-31 04:50 +0200
Subject[PATCH v4 1/9] ARM: dts: Add initial pin configuration for exynos3250-rinato
Message-ID<riAQi-6yy-13@gated-at.bofh.it>
This patch adds initial pin configuration using pinctrl subsystem
to reduce leakage power-consumption of gpio pins in normal state.
All pins included in this patch are NC (not connected) pin.

Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 38 +++++++++++++++++
 arch/arm/boot/dts/exynos3250-rinato.dts   | 71 ++++++++++++++++++++++++++++++-
 2 files changed, 107 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
index 5ab81c39e2c9..ecf79386e891 100644
--- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
@@ -16,11 +16,49 @@
 #define PIN_PULL_DOWN		1
 #define PIN_PULL_UP		3
 
+#define PIN_DRV_LV1		0
+#define PIN_DRV_LV2		2
+#define PIN_DRV_LV3		1
+#define PIN_DRV_LV4		3
+
 #define PIN_PDN_OUT0		0
 #define PIN_PDN_OUT1		1
 #define PIN_PDN_INPUT		2
 #define PIN_PDN_PREV		3
 
+#define PIN_IN(_pin, _pull, _drv)			\
+	_pin {						\
+		samsung,pins = #_pin;			\
+		samsung,pin-function = <0>;		\
+		samsung,pin-pud = <PIN_PULL_ ##_pull>;	\
+		samsung,pin-drv = <PIN_DRV_ ##_drv>;	\
+	}
+
+#define PIN_OUT(_pin, _drv)				\
+	_pin {						\
+		samsung,pins = #_pin;			\
+		samsung,pin-function = <1>;		\
+		samsung,pin-pud = <0>;			\
+		samsung,pin-drv = <PIN_DRV_ ##_drv>;	\
+	}
+
+#define PIN_OUT_SET(_pin, _val, _drv)			\
+	_pin {						\
+		samsung,pins = #_pin;			\
+		samsung,pin-function = <1>;		\
+		samsung,pin-pud = <0>;			\
+		samsung,pin-drv = <PIN_DRV_ ##_drv>;	\
+		samsung,pin-val = <_val>;		\
+	}
+
+#define PIN_CFG(_pin, _sel, _pull, _drv)		\
+	_pin {						\
+		samsung,pins = #_pin;			\
+		samsung,pin-function = <_sel>;		\
+		samsung,pin-pud = <PIN_PULL_ ##_pull>;	\
+		samsung,pin-drv = <PIN_DRV_ ##_drv>;	\
+	}
+
 #define PIN_SLP(_pin, _mode, _pull)				\
 	_pin {							\
 		samsung,pins = #_pin;				\
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 1f102f3a1ab1..31eb09bae0a2 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -681,7 +681,21 @@
 
 &pinctrl_0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&sleep0>;
+	pinctrl-0 = <&initial0 &sleep0>;
+
+	initial0: initial-state {
+		PIN_IN(gpa1-4, DOWN, LV1);
+		PIN_IN(gpa1-5, DOWN, LV1);
+
+		PIN_IN(gpc0-0, DOWN, LV1);
+		PIN_IN(gpc0-1, DOWN, LV1);
+		PIN_IN(gpc0-2, DOWN, LV1);
+		PIN_IN(gpc0-3, DOWN, LV1);
+		PIN_IN(gpc0-4, DOWN, LV1);
+
+		PIN_IN(gpd0-0, DOWN, LV1);
+		PIN_IN(gpd0-1, DOWN, LV1);
+	};
 
 	sleep0: sleep-state {
 		PIN_SLP(gpa0-0, INPUT, DOWN);
@@ -735,7 +749,60 @@
 
 &pinctrl_1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&sleep1>;
+	pinctrl-0 = <&initial1 &sleep1>;
+
+	initial1: initial-state {
+		PIN_IN(gpe0-6, DOWN, LV1);
+		PIN_IN(gpe0-7, DOWN, LV1);
+
+		PIN_IN(gpe1-0, DOWN, LV1);
+		PIN_IN(gpe1-3, DOWN, LV1);
+		PIN_IN(gpe1-4, DOWN, LV1);
+		PIN_IN(gpe1-5, DOWN, LV1);
+		PIN_IN(gpe1-6, DOWN, LV1);
+
+		PIN_IN(gpk2-0, DOWN, LV1);
+		PIN_IN(gpk2-1, DOWN, LV1);
+		PIN_IN(gpk2-2, DOWN, LV1);
+		PIN_IN(gpk2-3, DOWN, LV1);
+		PIN_IN(gpk2-4, DOWN, LV1);
+		PIN_IN(gpk2-5, DOWN, LV1);
+		PIN_IN(gpk2-6, DOWN, LV1);
+
+		PIN_IN(gpm0-0, DOWN, LV1);
+		PIN_IN(gpm0-1, DOWN, LV1);
+		PIN_IN(gpm0-2, DOWN, LV1);
+		PIN_IN(gpm0-3, DOWN, LV1);
+		PIN_IN(gpm0-4, DOWN, LV1);
+		PIN_IN(gpm0-5, DOWN, LV1);
+		PIN_IN(gpm0-6, DOWN, LV1);
+		PIN_IN(gpm0-7, DOWN, LV1);
+
+		PIN_IN(gpm1-0, DOWN, LV1);
+		PIN_IN(gpm1-1, DOWN, LV1);
+		PIN_IN(gpm1-2, DOWN, LV1);
+		PIN_IN(gpm1-3, DOWN, LV1);
+		PIN_IN(gpm1-4, DOWN, LV1);
+		PIN_IN(gpm1-5, DOWN, LV1);
+		PIN_IN(gpm1-6, DOWN, LV1);
+
+		PIN_IN(gpm2-0, DOWN, LV1);
+		PIN_IN(gpm2-1, DOWN, LV1);
+
+		PIN_IN(gpm3-0, DOWN, LV1);
+		PIN_IN(gpm3-1, DOWN, LV1);
+		PIN_IN(gpm3-2, DOWN, LV1);
+		PIN_IN(gpm3-3, DOWN, LV1);
+		PIN_IN(gpm3-4, DOWN, LV1);
+
+		PIN_IN(gpm4-1, DOWN, LV1);
+		PIN_IN(gpm4-2, DOWN, LV1);
+		PIN_IN(gpm4-3, DOWN, LV1);
+		PIN_IN(gpm4-4, DOWN, LV1);
+		PIN_IN(gpm4-5, DOWN, LV1);
+		PIN_IN(gpm4-6, DOWN, LV1);
+		PIN_IN(gpm4-7, DOWN, LV1);
+	};
 
 	sleep1: sleep-state {
 		PIN_SLP(gpe0-0, PREV, NONE);
-- 
1.9.1

[toc] | [next] | [standalone]


#1367810

FromKrzysztof Kozlowski <k.kozlowski@samsung.com>
Date2016-03-31 06:50 +0200
Message-ID<riCIp-80a-3@gated-at.bofh.it>
In reply to#1367767
On 31.03.2016 11:47, Chanwoo Choi wrote:
> This patch adds initial pin configuration using pinctrl subsystem
> to reduce leakage power-consumption of gpio pins in normal state.
> All pins included in this patch are NC (not connected) pin.
> 
> Cc: Kukjin Kim <kgene.kim@samsung.com>
> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
>  arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 38 +++++++++++++++++
>  arch/arm/boot/dts/exynos3250-rinato.dts   | 71 ++++++++++++++++++++++++++++++-
>  2 files changed, 107 insertions(+), 2 deletions(-)

Thanks, applied this one for v4.7 with adjusted title.

Best regards,
Krzysztof

[toc] | [prev] | [standalone]


Back to top | Article view | linux.kernel


csiph-web