Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1367766 > unrolled thread

[PATCH v4 6/9] ARM: dts: Add initial gpio setting of MMC2 device for exynos3250-monk

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v4 6/9] ARM: dts: Add initial gpio setting of MMC2 device for  exynos3250-monk Chanwoo Choi <cw00.choi@samsung.com> - 2016-03-31 04:50 +0200
    Re: [PATCH v4 6/9] ARM: dts: Add initial gpio setting of MMC2 device  for exynos3250-monk Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-03-31 06:50 +0200

#1367766 — [PATCH v4 6/9] ARM: dts: Add initial gpio setting of MMC2 device for exynos3250-monk

This patch adds initial pin configuration of MMC2 device on exynos3250-monk
board because the MMC2 gpio pin (gpk2[0-6]) are NC (not connected) state.

Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 arch/arm/boot/dts/exynos3250-monk.dts | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index 9e2840b59ae8..267f81adb42f 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -558,7 +558,17 @@
 
 &pinctrl_1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&sleep1>;
+	pinctrl-0 = <&initial1 &sleep1>;
+
+	initial1: initial-state {
+		PIN_IN(gpk2-0, DOWN, LV1);
+		PIN_IN(gpk2-1, DOWN, LV1);
+		PIN_IN(gpk2-2, DOWN, LV1);
+		PIN_IN(gpk2-3, DOWN, LV1);
+		PIN_IN(gpk2-4, DOWN, LV1);
+		PIN_IN(gpk2-5, DOWN, LV1);
+		PIN_IN(gpk2-6, DOWN, LV1);
+	};
 
 	sleep1: sleep-state {
 		PIN_SLP(gpe0-0, PREV, NONE);
-- 
1.9.1

[toc] | [next] | [standalone]

#1367809 — Re: [PATCH v4 6/9] ARM: dts: Add initial gpio setting of MMC2 device for exynos3250-monk

On 31.03.2016 11:48, Chanwoo Choi wrote:
> This patch adds initial pin configuration of MMC2 device on exynos3250-monk
> board because the MMC2 gpio pin (gpk2[0-6]) are NC (not connected) state.
> 
> Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
>  arch/arm/boot/dts/exynos3250-monk.dts | 12 +++++++++++-
>  1 file changed, 11 insertions(+), 1 deletion(-)

Thanks, applied this one for v4.7 with adjusted title.

I'll wait with other patches for Sylwester's branch/tag.

Best regards,
Krzysztof

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web