Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1365230 > unrolled thread

[PATCH v2] serial: samsung: Reorder the sequence of clock control when call s3c24xx_serial_set_termios()

Back to article view | Back to linux.kernel

Contents

  [PATCH v2] serial: samsung: Reorder the sequence of clock control when  call s3c24xx_serial_set_termios() Chanwoo Choi <cw00.choi@samsung.com> - 2016-03-28 01:50 +0200
    Re: [PATCH v2] serial: samsung: Reorder the sequence of clock control  when call s3c24xx_serial_set_termios() Marek Szyprowski <m.szyprowski@samsung.com> - 2016-03-29 10:00 +0200

#1365230 — [PATCH v2] serial: samsung: Reorder the sequence of clock control when call s3c24xx_serial_set_termios()

This patch fixes the broken serial log when changing the clock source
of uart device. Before disabling the original clock source, this patch
enables the new clock source to protect the clock off state for a split second.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
Changes from v1:
(https://lkml.org/lkml/2016/3/13/183)
- Enable the clock before changing the source by s3c24xx_serial_setsource()
- Rebase it on Linux v4.6-rc1

 drivers/tty/serial/samsung.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index ac7f8df54406..99bb23161dd6 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1271,6 +1271,8 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 	/* check to see if we need  to change clock source */
 
 	if (ourport->baudclk != clk) {
+		clk_prepare_enable(clk);
+
 		s3c24xx_serial_setsource(port, clk_sel);
 
 		if (!IS_ERR(ourport->baudclk)) {
@@ -1278,8 +1280,6 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 			ourport->baudclk = ERR_PTR(-EINVAL);
 		}
 
-		clk_prepare_enable(clk);
-
 		ourport->baudclk = clk;
 		ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
 	}
-- 
1.9.1

[toc] | [next] | [standalone]

#1365969 — Re: [PATCH v2] serial: samsung: Reorder the sequence of clock control when call s3c24xx_serial_set_termios()

Hello,

On 2016-03-28 01:48, Chanwoo Choi wrote:
> This patch fixes the broken serial log when changing the clock source
> of uart device. Before disabling the original clock source, this patch
> enables the new clock source to protect the clock off state for a split second.
>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>

> ---
> Changes from v1:
> (https://lkml.org/lkml/2016/3/13/183)
> - Enable the clock before changing the source by s3c24xx_serial_setsource()
> - Rebase it on Linux v4.6-rc1
>
>   drivers/tty/serial/samsung.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
> index ac7f8df54406..99bb23161dd6 100644
> --- a/drivers/tty/serial/samsung.c
> +++ b/drivers/tty/serial/samsung.c
> @@ -1271,6 +1271,8 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
>   	/* check to see if we need  to change clock source */
>   
>   	if (ourport->baudclk != clk) {
> +		clk_prepare_enable(clk);
> +
>   		s3c24xx_serial_setsource(port, clk_sel);
>   
>   		if (!IS_ERR(ourport->baudclk)) {
> @@ -1278,8 +1280,6 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
>   			ourport->baudclk = ERR_PTR(-EINVAL);
>   		}
>   
> -		clk_prepare_enable(clk);
> -
>   		ourport->baudclk = clk;
>   		ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
>   	}

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web