Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1357221 > unrolled thread
| Started by | Laxman Dewangan <ldewangan@nvidia.com> |
|---|---|
| First post | 2016-03-14 14:10 +0100 |
| Last post | 2016-03-16 08:50 +0100 |
| Articles | 3 — 3 participants |
Back to article view | Back to linux.kernel
[PATCH V2] regulator: pwm: Prints error number along with detail Laxman Dewangan <ldewangan@nvidia.com> - 2016-03-14 14:10 +0100
Applied "regulator: pwm: Prints error number along with detail" to the regulator tree Mark Brown <broonie@kernel.org> - 2016-03-15 10:30 +0100
Re: [PATCH V2] regulator: pwm: Prints error number along with detail Lee Jones <lee.jones@linaro.org> - 2016-03-16 08:50 +0100
| From | Laxman Dewangan <ldewangan@nvidia.com> |
|---|---|
| Date | 2016-03-14 14:10 +0100 |
| Subject | [PATCH V2] regulator: pwm: Prints error number along with detail |
| Message-ID | <rcApY-4at-7@gated-at.bofh.it> |
Prints the error number along with error message when any
error occurs. This help on getting the reason of failure
quickly from log without any code instrument.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Cc: Lee Jones <lee.jones@linaro.org>
---
This was part of the series:
regulator: pwm: Add supports for multiple instance and voltage linear step
But first 2 patches are already applied of this series, creating patch on top
of applied patches and resetting the patch count.
- Taken care of the comment for error print like it should be "foo: %d\n"
style.
- Added error number on all possible places.
drivers/regulator/pwm-regulator.c | 23 ++++++++++++-----------
1 file changed, 12 insertions(+), 11 deletions(-)
diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index 4689d62..f99a697 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c
@@ -70,7 +70,7 @@ static int pwm_regulator_set_voltage_sel(struct regulator_dev *rdev,
ret = pwm_config(drvdata->pwm, dutycycle, pwm_reg_period);
if (ret) {
- dev_err(&rdev->dev, "Failed to configure PWM\n");
+ dev_err(&rdev->dev, "Failed to configure PWM: %d\n", ret);
return ret;
}
@@ -146,13 +146,13 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
ret = pwm_config(drvdata->pwm, (period / 100) * duty_cycle, period);
if (ret) {
- dev_err(&rdev->dev, "Failed to configure PWM\n");
+ dev_err(&rdev->dev, "Failed to configure PWM: %d\n", ret);
return ret;
}
ret = pwm_enable(drvdata->pwm);
if (ret) {
- dev_err(&rdev->dev, "Failed to enable PWM\n");
+ dev_err(&rdev->dev, "Failed to enable PWM: %d\n", ret);
return ret;
}
drvdata->volt_uV = min_uV;
@@ -200,8 +200,7 @@ static int pwm_regulator_init_table(struct platform_device *pdev,
if ((length < sizeof(*duty_cycle_table)) ||
(length % sizeof(*duty_cycle_table))) {
- dev_err(&pdev->dev,
- "voltage-table length(%d) is invalid\n",
+ dev_err(&pdev->dev, "voltage-table length(%d) is invalid\n",
length);
return -EINVAL;
}
@@ -214,7 +213,7 @@ static int pwm_regulator_init_table(struct platform_device *pdev,
(u32 *)duty_cycle_table,
length / sizeof(u32));
if (ret) {
- dev_err(&pdev->dev, "Failed to read voltage-table\n");
+ dev_err(&pdev->dev, "Failed to read voltage-table: %d\n", ret);
return ret;
}
@@ -277,16 +276,18 @@ static int pwm_regulator_probe(struct platform_device *pdev)
drvdata->pwm = devm_pwm_get(&pdev->dev, NULL);
if (IS_ERR(drvdata->pwm)) {
- dev_err(&pdev->dev, "Failed to get PWM\n");
- return PTR_ERR(drvdata->pwm);
+ ret = PTR_ERR(drvdata->pwm);
+ dev_err(&pdev->dev, "Failed to get PWM: %d\n", ret);
+ return ret;
}
regulator = devm_regulator_register(&pdev->dev,
&drvdata->desc, &config);
if (IS_ERR(regulator)) {
- dev_err(&pdev->dev, "Failed to register regulator %s\n",
- drvdata->desc.name);
- return PTR_ERR(regulator);
+ ret = PTR_ERR(regulator);
+ dev_err(&pdev->dev, "Failed to register regulator %s: %d\n",
+ drvdata->desc.name, ret);
+ return ret;
}
return 0;
--
2.1.4
[toc] | [next] | [standalone]
| From | Mark Brown <broonie@kernel.org> |
|---|---|
| Date | 2016-03-15 10:30 +0100 |
| Subject | Applied "regulator: pwm: Prints error number along with detail" to the regulator tree |
| Message-ID | <rcTsC-72-13@gated-at.bofh.it> |
| In reply to | #1357221 |
The patch
regulator: pwm: Prints error number along with detail
has been applied to the regulator tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 5bf59bd5e9a5b262110df8c1ea5ad8820d7d524a Mon Sep 17 00:00:00 2001
From: Laxman Dewangan <ldewangan@nvidia.com>
Date: Mon, 14 Mar 2016 18:20:13 +0530
Subject: [PATCH] regulator: pwm: Prints error number along with detail
Prints the error number along with error message when any
error occurs. This help on getting the reason of failure
quickly from log without any code instrument.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/pwm-regulator.c | 23 ++++++++++++-----------
1 file changed, 12 insertions(+), 11 deletions(-)
diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index 4689d62f4841..f99a6970be29 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c
@@ -70,7 +70,7 @@ static int pwm_regulator_set_voltage_sel(struct regulator_dev *rdev,
ret = pwm_config(drvdata->pwm, dutycycle, pwm_reg_period);
if (ret) {
- dev_err(&rdev->dev, "Failed to configure PWM\n");
+ dev_err(&rdev->dev, "Failed to configure PWM: %d\n", ret);
return ret;
}
@@ -146,13 +146,13 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
ret = pwm_config(drvdata->pwm, (period / 100) * duty_cycle, period);
if (ret) {
- dev_err(&rdev->dev, "Failed to configure PWM\n");
+ dev_err(&rdev->dev, "Failed to configure PWM: %d\n", ret);
return ret;
}
ret = pwm_enable(drvdata->pwm);
if (ret) {
- dev_err(&rdev->dev, "Failed to enable PWM\n");
+ dev_err(&rdev->dev, "Failed to enable PWM: %d\n", ret);
return ret;
}
drvdata->volt_uV = min_uV;
@@ -200,8 +200,7 @@ static int pwm_regulator_init_table(struct platform_device *pdev,
if ((length < sizeof(*duty_cycle_table)) ||
(length % sizeof(*duty_cycle_table))) {
- dev_err(&pdev->dev,
- "voltage-table length(%d) is invalid\n",
+ dev_err(&pdev->dev, "voltage-table length(%d) is invalid\n",
length);
return -EINVAL;
}
@@ -214,7 +213,7 @@ static int pwm_regulator_init_table(struct platform_device *pdev,
(u32 *)duty_cycle_table,
length / sizeof(u32));
if (ret) {
- dev_err(&pdev->dev, "Failed to read voltage-table\n");
+ dev_err(&pdev->dev, "Failed to read voltage-table: %d\n", ret);
return ret;
}
@@ -277,16 +276,18 @@ static int pwm_regulator_probe(struct platform_device *pdev)
drvdata->pwm = devm_pwm_get(&pdev->dev, NULL);
if (IS_ERR(drvdata->pwm)) {
- dev_err(&pdev->dev, "Failed to get PWM\n");
- return PTR_ERR(drvdata->pwm);
+ ret = PTR_ERR(drvdata->pwm);
+ dev_err(&pdev->dev, "Failed to get PWM: %d\n", ret);
+ return ret;
}
regulator = devm_regulator_register(&pdev->dev,
&drvdata->desc, &config);
if (IS_ERR(regulator)) {
- dev_err(&pdev->dev, "Failed to register regulator %s\n",
- drvdata->desc.name);
- return PTR_ERR(regulator);
+ ret = PTR_ERR(regulator);
+ dev_err(&pdev->dev, "Failed to register regulator %s: %d\n",
+ drvdata->desc.name, ret);
+ return ret;
}
return 0;
--
2.7.0
[toc] | [prev] | [next] | [standalone]
| From | Lee Jones <lee.jones@linaro.org> |
|---|---|
| Date | 2016-03-16 08:50 +0100 |
| Message-ID | <rdeno-5MN-7@gated-at.bofh.it> |
| In reply to | #1357221 |
On Mon, 14 Mar 2016, Laxman Dewangan wrote:
> Prints the error number along with error message when any
> error occurs. This help on getting the reason of failure
> quickly from log without any code instrument.
>
> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
> Cc: Lee Jones <lee.jones@linaro.org>
> ---
> This was part of the series:
> regulator: pwm: Add supports for multiple instance and voltage linear step
> But first 2 patches are already applied of this series, creating patch on top
> of applied patches and resetting the patch count.
>
> - Taken care of the comment for error print like it should be "foo: %d\n"
> style.
> - Added error number on all possible places.
>
> drivers/regulator/pwm-regulator.c | 23 ++++++++++++-----------
> 1 file changed, 12 insertions(+), 11 deletions(-)
Acked-by: Lee Jones <lee.jones@linaro.org>
> diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
> index 4689d62..f99a697 100644
> --- a/drivers/regulator/pwm-regulator.c
> +++ b/drivers/regulator/pwm-regulator.c
> @@ -70,7 +70,7 @@ static int pwm_regulator_set_voltage_sel(struct regulator_dev *rdev,
>
> ret = pwm_config(drvdata->pwm, dutycycle, pwm_reg_period);
> if (ret) {
> - dev_err(&rdev->dev, "Failed to configure PWM\n");
> + dev_err(&rdev->dev, "Failed to configure PWM: %d\n", ret);
> return ret;
> }
>
> @@ -146,13 +146,13 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
>
> ret = pwm_config(drvdata->pwm, (period / 100) * duty_cycle, period);
> if (ret) {
> - dev_err(&rdev->dev, "Failed to configure PWM\n");
> + dev_err(&rdev->dev, "Failed to configure PWM: %d\n", ret);
> return ret;
> }
>
> ret = pwm_enable(drvdata->pwm);
> if (ret) {
> - dev_err(&rdev->dev, "Failed to enable PWM\n");
> + dev_err(&rdev->dev, "Failed to enable PWM: %d\n", ret);
> return ret;
> }
> drvdata->volt_uV = min_uV;
> @@ -200,8 +200,7 @@ static int pwm_regulator_init_table(struct platform_device *pdev,
>
> if ((length < sizeof(*duty_cycle_table)) ||
> (length % sizeof(*duty_cycle_table))) {
> - dev_err(&pdev->dev,
> - "voltage-table length(%d) is invalid\n",
> + dev_err(&pdev->dev, "voltage-table length(%d) is invalid\n",
> length);
> return -EINVAL;
> }
> @@ -214,7 +213,7 @@ static int pwm_regulator_init_table(struct platform_device *pdev,
> (u32 *)duty_cycle_table,
> length / sizeof(u32));
> if (ret) {
> - dev_err(&pdev->dev, "Failed to read voltage-table\n");
> + dev_err(&pdev->dev, "Failed to read voltage-table: %d\n", ret);
> return ret;
> }
>
> @@ -277,16 +276,18 @@ static int pwm_regulator_probe(struct platform_device *pdev)
>
> drvdata->pwm = devm_pwm_get(&pdev->dev, NULL);
> if (IS_ERR(drvdata->pwm)) {
> - dev_err(&pdev->dev, "Failed to get PWM\n");
> - return PTR_ERR(drvdata->pwm);
> + ret = PTR_ERR(drvdata->pwm);
> + dev_err(&pdev->dev, "Failed to get PWM: %d\n", ret);
> + return ret;
> }
>
> regulator = devm_regulator_register(&pdev->dev,
> &drvdata->desc, &config);
> if (IS_ERR(regulator)) {
> - dev_err(&pdev->dev, "Failed to register regulator %s\n",
> - drvdata->desc.name);
> - return PTR_ERR(regulator);
> + ret = PTR_ERR(regulator);
> + dev_err(&pdev->dev, "Failed to register regulator %s: %d\n",
> + drvdata->desc.name, ret);
> + return ret;
> }
>
> return 0;
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web