Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1351694 > unrolled thread

[PATCH v2 00/10] ARM: DTS/clk: DRA7 family: enable eDMA and audio updates

Back to article view | Back to linux.kernel

Contents

  [PATCH v2 00/10] ARM: DTS/clk: DRA7 family: enable eDMA and audio updates Peter Ujfalusi <peter.ujfalusi@ti.com> - 2016-03-07 16:20 +0100
    [PATCH v2 04/10] ARM: DTS: dra7-evm: Enable AFIFO use for McASP3 Peter Ujfalusi <peter.ujfalusi@ti.com> - 2016-03-07 16:20 +0100
    [PATCH v2 01/10] ARM: DTS: dra7: Move the sDMA crossbar node under l4_cfg/scm Peter Ujfalusi <peter.ujfalusi@ti.com> - 2016-03-07 16:20 +0100
    [PATCH v2 08/10] ARM: clk: dra7xx: Correct mcasp8_ahclkx_mux name Peter Ujfalusi <peter.ujfalusi@ti.com> - 2016-03-07 16:20 +0100
    [PATCH v2 07/10] ARM: DTS: am57xx-beagle-x15: Enable AFIFO use for McASP3 Peter Ujfalusi <peter.ujfalusi@ti.com> - 2016-03-07 16:20 +0100
    [PATCH v2 09/10] ARM: DRA7: hwmod: Add data for McASP1/2/4/5/6/7/8 Peter Ujfalusi <peter.ujfalusi@ti.com> - 2016-03-07 16:20 +0100
      Re: [PATCH v2 09/10] ARM: DRA7: hwmod: Add data for  McASP1/2/4/5/6/7/8 Paul Walmsley <paul@pwsan.com> - 2016-03-08 07:40 +0100
    [PATCH v2 03/10] ARM: DTS: dra7: Use eDMA and add DAT port address for McASP3 Peter Ujfalusi <peter.ujfalusi@ti.com> - 2016-03-07 16:30 +0100
    [PATCH v2 05/10] ARM: DTS: dra72-evm: Enable AFIFO use for McASP3 Peter Ujfalusi <peter.ujfalusi@ti.com> - 2016-03-07 16:30 +0100
    [PATCH v2 06/10] ARM: DTS: am57xx-beagle-x15: Move clkout2 source selection to codec node Peter Ujfalusi <peter.ujfalusi@ti.com> - 2016-03-07 16:30 +0100
    [PATCH v2 02/10] ARM: DTS: dra7: Enable eDMA Peter Ujfalusi <peter.ujfalusi@ti.com> - 2016-03-07 16:30 +0100

#1351694 — [PATCH v2 00/10] ARM: DTS/clk: DRA7 family: enable eDMA and audio updates

Hi,

Changes since v1:
- hwmod patch for eDMA (tpcc/tptc0/tptc1) removed as it is already in linux-next
- mcasp hwmod changes:
 - all module have HWMOD_OPT_CLKS_NEEDED and no HWMOD_SWSUP_SIDLE (per Paul's
   comment)
 - mcasp1,2: add ahclkr as opt clock since those modules have fclk, ahclkx and
   ahclkr marked as functional clocks.
   Same change is added to the DTS patch

On dra7 family we have two DMA engine available: sDMA (omap-dma) and eDMA.
For some peripherals the use of eDMA is better due to L3 interconnect limitation
when using sDMA. Such peripherals are McASP1/2/3. By switching to eDMA we can
enable the AFIFO which will help to avoid under or overruns in audio.

This set will:
- add the hwmod data for eDMA TPCC and TPTCs
- add the needed DT nodes for eDMA and the crossbar
- we will enable the AFIFO use for audio
- add hwmod data and DT nodes for all McASP ports
- Fix the beagle-x15's clkout2 parent setting for the codec

The patch set has been tested on top of linux-next.

Regards,
Peter
---
Misael Lopez Cruz (1):
  ARM: DTS: dra7: Use eDMA and add DAT port address for McASP3

Peter Ujfalusi (9):
  ARM: DTS: dra7: Move the sDMA crossbar node under l4_cfg/scm
  ARM: DTS: dra7: Enable eDMA
  ARM: DTS: dra7-evm: Enable AFIFO use for McASP3
  ARM: DTS: dra72-evm: Enable AFIFO use for McASP3
  ARM: DTS: am57xx-beagle-x15: Move clkout2 source selection to codec
    node
  ARM: DTS: am57xx-beagle-x15: Enable AFIFO use for McASP3
  ARM: clk: dra7xx: Correct mcasp8_ahclkx_mux name
  ARM: DRA7: hwmod: Add data for McASP1/2/4/5/6/7/8
  ARM: DTS: dra7: Add nodes for McASP1/2/4/5/6/7/8

 arch/arm/boot/dts/am57xx-beagle-x15.dts   |   7 +-
 arch/arm/boot/dts/dra7-evm.dts            |   2 +
 arch/arm/boot/dts/dra7.dtsi               | 183 +++++++++++++++++++++--
 arch/arm/boot/dts/dra72-evm.dts           |   2 +
 arch/arm/boot/dts/dra7xx-clocks.dtsi      |   2 +-
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 237 ++++++++++++++++++++++++++++++
 drivers/clk/ti/clk-7xx.c                  |   2 +-
 7 files changed, 421 insertions(+), 14 deletions(-)

-- 
2.7.2

[toc] | [next] | [standalone]

#1351697 — [PATCH v2 04/10] ARM: DTS: dra7-evm: Enable AFIFO use for McASP3

Since we switched to use eDMA we can now safely enable the FIFO in McASP.
This will reduce the chance of McASP level under/overflow.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/boot/dts/dra7-evm.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index d9b87236019d..1b2a2f8c38e7 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -904,6 +904,8 @@
 	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 		1 2 0 0
 	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
 };
 
 &mailbox5 {
-- 
2.7.2

[toc] | [prev] | [next] | [standalone]

#1351699 — [PATCH v2 01/10] ARM: DTS: dra7: Move the sDMA crossbar node under l4_cfg/scm

Move the sDMA xbar nodes under the L4 interconnect node.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/boot/dts/dra7.dtsi | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 098b4dd14b01..db7fda97a4fa 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -161,6 +161,15 @@
 					compatible = "syscon";
 					reg = <0x1c24 0x0024>;
 				};
+
+				sdma_xbar: dma-router@b78 {
+					compatible = "ti,dra7-dma-crossbar";
+					reg = <0xb78 0xfc>;
+					#dma-cells = <1>;
+					dma-requests = <205>;
+					ti,dma-safe-map = <0>;
+					dma-masters = <&sdma>;
+				};
 			};
 
 			cm_core_aon: cm_core_aon@5000 {
@@ -315,15 +324,6 @@
 			dma-requests = <127>;
 		};
 
-		sdma_xbar: dma-router@4a002b78 {
-			compatible = "ti,dra7-dma-crossbar";
-			reg = <0x4a002b78 0xfc>;
-			#dma-cells = <1>;
-			dma-requests = <205>;
-			ti,dma-safe-map = <0>;
-			dma-masters = <&sdma>;
-		};
-
 		gpio1: gpio@4ae10000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x4ae10000 0x200>;
-- 
2.7.2

[toc] | [prev] | [next] | [standalone]

#1351703 — [PATCH v2 08/10] ARM: clk: dra7xx: Correct mcasp8_ahclkx_mux name

rename the mcasp8_ahclk_mux to mcasp8_ahclkx_mux.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/boot/dts/dra7xx-clocks.dtsi | 2 +-
 drivers/clk/ti/clk-7xx.c             | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index d0bae06b7eb7..4d614b3c7ec2 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -1856,7 +1856,7 @@
 		reg = <0x1908>;
 	};
 
-	mcasp8_ahclk_mux: mcasp8_ahclk_mux {
+	mcasp8_ahclkx_mux: mcasp8_ahclkx_mux {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c
index a911d7de3377..6b5a309d9939 100644
--- a/drivers/clk/ti/clk-7xx.c
+++ b/drivers/clk/ti/clk-7xx.c
@@ -223,7 +223,7 @@ static struct ti_dt_clk dra7xx_clks[] = {
 	DT_CLK(NULL, "mcasp6_aux_gfclk_mux", "mcasp6_aux_gfclk_mux"),
 	DT_CLK(NULL, "mcasp7_ahclkx_mux", "mcasp7_ahclkx_mux"),
 	DT_CLK(NULL, "mcasp7_aux_gfclk_mux", "mcasp7_aux_gfclk_mux"),
-	DT_CLK(NULL, "mcasp8_ahclk_mux", "mcasp8_ahclk_mux"),
+	DT_CLK(NULL, "mcasp8_ahclkx_mux", "mcasp8_ahclkx_mux"),
 	DT_CLK(NULL, "mcasp8_aux_gfclk_mux", "mcasp8_aux_gfclk_mux"),
 	DT_CLK(NULL, "mmc1_fclk_mux", "mmc1_fclk_mux"),
 	DT_CLK(NULL, "mmc1_fclk_div", "mmc1_fclk_div"),
-- 
2.7.2

[toc] | [prev] | [next] | [standalone]

#1351705 — [PATCH v2 07/10] ARM: DTS: am57xx-beagle-x15: Enable AFIFO use for McASP3

Since we switched to use eDMA we can now safely enable the FIFO in McASP.
This will reduce the chance of McASP level under/overflow.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/boot/dts/am57xx-beagle-x15.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index 2bbc8ae00ada..08fd3c37d628 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -813,6 +813,8 @@
 	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
 		1 2 0 0
 	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
 };
 
 &mailbox5 {
-- 
2.7.2

[toc] | [prev] | [next] | [standalone]

#1351706 — [PATCH v2 09/10] ARM: DRA7: hwmod: Add data for McASP1/2/4/5/6/7/8

Add missing data for all McASP ports for the dra7 family

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 237 ++++++++++++++++++++++++++++++
 1 file changed, 237 insertions(+)

diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 9442d89bd229..7610f3ef28b7 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -1374,6 +1374,52 @@ static struct omap_hwmod_class dra7xx_mcasp_hwmod_class = {
 	.sysc	= &dra7xx_mcasp_sysc,
 };
 
+/* mcasp1 */
+static struct omap_hwmod_opt_clk mcasp1_opt_clks[] = {
+	{ .role = "ahclkx", .clk = "mcasp1_ahclkx_mux" },
+	{ .role = "ahclkr", .clk = "mcasp1_ahclkr_mux" },
+};
+
+static struct omap_hwmod dra7xx_mcasp1_hwmod = {
+	.name		= "mcasp1",
+	.class		= &dra7xx_mcasp_hwmod_class,
+	.clkdm_name	= "ipu_clkdm",
+	.main_clk	= "mcasp1_aux_gfclk_mux",
+	.flags		= HWMOD_OPT_CLKS_NEEDED,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_IPU_MCASP1_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_IPU_MCASP1_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= mcasp1_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcasp1_opt_clks),
+};
+
+/* mcasp2 */
+static struct omap_hwmod_opt_clk mcasp2_opt_clks[] = {
+	{ .role = "ahclkx", .clk = "mcasp2_ahclkx_mux" },
+	{ .role = "ahclkr", .clk = "mcasp2_ahclkr_mux" },
+};
+
+static struct omap_hwmod dra7xx_mcasp2_hwmod = {
+	.name		= "mcasp2",
+	.class		= &dra7xx_mcasp_hwmod_class,
+	.clkdm_name	= "l4per2_clkdm",
+	.main_clk	= "mcasp2_aux_gfclk_mux",
+	.flags		= HWMOD_OPT_CLKS_NEEDED,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP2_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER2_MCASP2_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= mcasp2_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcasp2_opt_clks),
+};
+
 /* mcasp3 */
 static struct omap_hwmod_opt_clk mcasp3_opt_clks[] = {
 	{ .role = "ahclkx", .clk = "mcasp3_ahclkx_mux" },
@@ -1396,6 +1442,116 @@ static struct omap_hwmod dra7xx_mcasp3_hwmod = {
 	.opt_clks_cnt	= ARRAY_SIZE(mcasp3_opt_clks),
 };
 
+/* mcasp4 */
+static struct omap_hwmod_opt_clk mcasp4_opt_clks[] = {
+	{ .role = "ahclkx", .clk = "mcasp4_ahclkx_mux" },
+};
+
+static struct omap_hwmod dra7xx_mcasp4_hwmod = {
+	.name		= "mcasp4",
+	.class		= &dra7xx_mcasp_hwmod_class,
+	.clkdm_name	= "l4per2_clkdm",
+	.main_clk	= "mcasp4_aux_gfclk_mux",
+	.flags		= HWMOD_OPT_CLKS_NEEDED,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP4_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER2_MCASP4_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= mcasp4_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcasp4_opt_clks),
+};
+
+/* mcasp5 */
+static struct omap_hwmod_opt_clk mcasp5_opt_clks[] = {
+	{ .role = "ahclkx", .clk = "mcasp5_ahclkx_mux" },
+};
+
+static struct omap_hwmod dra7xx_mcasp5_hwmod = {
+	.name		= "mcasp5",
+	.class		= &dra7xx_mcasp_hwmod_class,
+	.clkdm_name	= "l4per2_clkdm",
+	.main_clk	= "mcasp5_aux_gfclk_mux",
+	.flags		= HWMOD_OPT_CLKS_NEEDED,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP5_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER2_MCASP5_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= mcasp5_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcasp5_opt_clks),
+};
+
+/* mcasp6 */
+static struct omap_hwmod_opt_clk mcasp6_opt_clks[] = {
+	{ .role = "ahclkx", .clk = "mcasp6_ahclkx_mux" },
+};
+
+static struct omap_hwmod dra7xx_mcasp6_hwmod = {
+	.name		= "mcasp6",
+	.class		= &dra7xx_mcasp_hwmod_class,
+	.clkdm_name	= "l4per2_clkdm",
+	.main_clk	= "mcasp6_aux_gfclk_mux",
+	.flags		= HWMOD_OPT_CLKS_NEEDED,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP6_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER2_MCASP6_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= mcasp6_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcasp6_opt_clks),
+};
+
+/* mcasp7 */
+static struct omap_hwmod_opt_clk mcasp7_opt_clks[] = {
+	{ .role = "ahclkx", .clk = "mcasp7_ahclkx_mux" },
+};
+
+static struct omap_hwmod dra7xx_mcasp7_hwmod = {
+	.name		= "mcasp7",
+	.class		= &dra7xx_mcasp_hwmod_class,
+	.clkdm_name	= "l4per2_clkdm",
+	.main_clk	= "mcasp7_aux_gfclk_mux",
+	.flags		= HWMOD_OPT_CLKS_NEEDED,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP7_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER2_MCASP7_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= mcasp7_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcasp7_opt_clks),
+};
+
+/* mcasp8 */
+static struct omap_hwmod_opt_clk mcasp8_opt_clks[] = {
+	{ .role = "ahclkx", .clk = "mcasp8_ahclkx_mux" },
+};
+
+static struct omap_hwmod dra7xx_mcasp8_hwmod = {
+	.name		= "mcasp8",
+	.class		= &dra7xx_mcasp_hwmod_class,
+	.clkdm_name	= "l4per2_clkdm",
+	.main_clk	= "mcasp8_aux_gfclk_mux",
+	.flags		= HWMOD_OPT_CLKS_NEEDED,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP8_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER2_MCASP8_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= mcasp8_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcasp8_opt_clks),
+};
+
 /*
  * 'mmc' class
  *
@@ -2726,6 +2882,38 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__hdmi = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l4_per2 -> mcasp1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp1 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_mcasp1_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> mcasp1 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__mcasp1 = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_mcasp1_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per2 -> mcasp2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp2 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_mcasp2_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> mcasp2 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__mcasp2 = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_mcasp2_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* l4_per2 -> mcasp3 */
 static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp3 = {
 	.master		= &dra7xx_l4_per2_hwmod,
@@ -2742,6 +2930,46 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__mcasp3 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l4_per2 -> mcasp4 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp4 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_mcasp4_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per2 -> mcasp5 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp5 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_mcasp5_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per2 -> mcasp6 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp6 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_mcasp6_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per2 -> mcasp7 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp7 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_mcasp7_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per2 -> mcasp8 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp8 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_mcasp8_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* l4_per1 -> elm */
 static struct omap_hwmod_ocp_if dra7xx_l4_per1__elm = {
 	.master		= &dra7xx_l4_per1_hwmod,
@@ -3484,8 +3712,17 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l4_wkup__dcan1,
 	&dra7xx_l4_per2__dcan2,
 	&dra7xx_l4_per2__cpgmac0,
+	&dra7xx_l4_per2__mcasp1,
+	&dra7xx_l3_main_1__mcasp1,
+	&dra7xx_l4_per2__mcasp2,
+	&dra7xx_l3_main_1__mcasp2,
 	&dra7xx_l4_per2__mcasp3,
 	&dra7xx_l3_main_1__mcasp3,
+	&dra7xx_l4_per2__mcasp4,
+	&dra7xx_l4_per2__mcasp5,
+	&dra7xx_l4_per2__mcasp6,
+	&dra7xx_l4_per2__mcasp7,
+	&dra7xx_l4_per2__mcasp8,
 	&dra7xx_gmac__mdio,
 	&dra7xx_l4_cfg__dma_system,
 	&dra7xx_l3_main_1__tpcc,
-- 
2.7.2

[toc] | [prev] | [next] | [standalone]

#1352666 — Re: [PATCH v2 09/10] ARM: DRA7: hwmod: Add data for McASP1/2/4/5/6/7/8

On Mon, 7 Mar 2016, Peter Ujfalusi wrote:

> Add missing data for all McASP ports for the dra7 family
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

Thanks, queued for v4.7.

- Paul

[toc] | [prev] | [next] | [standalone]

#1351710 — [PATCH v2 03/10] ARM: DTS: dra7: Use eDMA and add DAT port address for McASP3

From: Misael Lopez Cruz <misael.lopez@ti.com>

McASP3 does not support constant addressing mode on the DAT
port, so increment transfers must be used instead.  This
restriction is also applicable for McASP1 and McASP2.

This DMA addressing constraint poses a major problem for sDMA
where constant addressing mode is used on the peripheral side.
Unfortunately, using increment transfers in sDMA comes with
important side effects.

The addressing mode used in eDMA is INC, so the silicon limitation
described above has no impact and the McASP3 DAT port can be
safely added by switching to eDMA instead of sDMA.

Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/boot/dts/dra7.dtsi | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index b99f51288e71..4c192ea8ae29 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1469,12 +1469,13 @@
 		mcasp3: mcasp@48468000 {
 			compatible = "ti,dra7-mcasp-audio";
 			ti,hwmods = "mcasp3";
-			reg = <0x48468000 0x2000>;
-			reg-names = "mpu";
+			reg = <0x48468000 0x2000>,
+			      <0x46000000 0x1000>;
+			reg-names = "mpu","dat";
 			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "tx", "rx";
-			dmas = <&sdma_xbar 133>, <&sdma_xbar 132>;
+			dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>;
 			dma-names = "tx", "rx";
 			clocks = <&mcasp3_aux_gfclk_mux>, <&mcasp3_ahclkx_mux>;
 			clock-names = "fck", "ahclkx";
-- 
2.7.2

[toc] | [prev] | [next] | [standalone]

#1351711 — [PATCH v2 05/10] ARM: DTS: dra72-evm: Enable AFIFO use for McASP3

Since we switched to use eDMA we can now safely enable the FIFO in McASP.
This will reduce the chance of McASP level under/overflow.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/boot/dts/dra72-evm.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index 6affe2d137da..bdfc9476f036 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -834,6 +834,8 @@
 	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 		1 2 0 0
 	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
 };
 
 &mailbox5 {
-- 
2.7.2

[toc] | [prev] | [next] | [standalone]

#1351713 — [PATCH v2 06/10] ARM: DTS: am57xx-beagle-x15: Move clkout2 source selection to codec node

The assigned-clock* needs to be in the root of the device's node. If it is
in the sub-node the CCF will ignore it.
Since the clkout2 is used by the codec as MCLK, move the clock parent
selection to that node.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/boot/dts/am57xx-beagle-x15.dts | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index 0a5fc5d02ce2..2bbc8ae00ada 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -173,8 +173,6 @@
 
 		sound0_master: simple-audio-card,codec {
 			sound-dai = <&tlv320aic3104>;
-			assigned-clocks = <&clkoutmux2_clk_mux>;
-			assigned-clock-parents = <&sys_clk2_dclk_div>;
 			clocks = <&clkout2_clk>;
 		};
 	};
@@ -584,6 +582,9 @@
 		pinctrl-names = "default", "sleep";
 		pinctrl-0 = <&clkout2_pins_default>;
 		pinctrl-1 = <&clkout2_pins_sleep>;
+		assigned-clocks = <&clkoutmux2_clk_mux>;
+		assigned-clock-parents = <&sys_clk2_dclk_div>;
+
 		status = "okay";
 		adc-settle-ms = <40>;
 
-- 
2.7.2

[toc] | [prev] | [next] | [standalone]

#1351714 — [PATCH v2 02/10] ARM: DTS: dra7: Enable eDMA

DRA7 family has eDMA available along with the sDMA and in some cases it is
better suited for servicing peripherals.

Add the needed nodes for eDMA to be usable:
edma-tpcc, edma-tptc0/1 and the edma-xbar.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/boot/dts/dra7.dtsi | 48 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index db7fda97a4fa..b99f51288e71 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -170,6 +170,15 @@
 					ti,dma-safe-map = <0>;
 					dma-masters = <&sdma>;
 				};
+
+				edma_xbar: dma-router@c78 {
+					compatible = "ti,dra7-dma-crossbar";
+					reg = <0xc78 0x7c>;
+					#dma-cells = <2>;
+					dma-requests = <204>;
+					ti,dma-safe-map = <0>;
+					dma-masters = <&edma>;
+				};
 			};
 
 			cm_core_aon: cm_core_aon@5000 {
@@ -324,6 +333,45 @@
 			dma-requests = <127>;
 		};
 
+		edma: edma@43300000 {
+			compatible = "ti,edma3-tpcc";
+			ti,hwmods = "tpcc";
+			reg = <0x43300000 0x100000>;
+			reg-names = "edma3_cc";
+			interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_ccint", "emda3_mperr",
+					  "edma3_ccerrint";
+			dma-requests = <64>;
+			#dma-cells = <2>;
+
+			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
+
+			/*
+			 * memcpy is disabled, can be enabled with:
+			 * ti,edma-memcpy-channels = <20 21>;
+			 * for example. Note that these channels need to be
+			 * masked in the xbar as well.
+			 */
+		};
+
+		edma_tptc0: tptc@43400000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc0";
+			reg =	<0x43400000 0x100000>;
+			interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc1: tptc@43500000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc1";
+			reg =	<0x43500000 0x100000>;
+			interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
 		gpio1: gpio@4ae10000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x4ae10000 0x200>;
-- 
2.7.2

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web