Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1450593 > unrolled thread

Re: [PATCH] power:bq27xxx: 27000/10 read FLAGS register as single

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH] power:bq27xxx: 27000/10 read FLAGS register as single "Andrew F. Davis" <afd@ti.com> - 2016-07-26 15:10 +0200

#1450593 — Re: [PATCH] power:bq27xxx: 27000/10 read FLAGS register as single

On 07/18/2016 11:12 AM, H. Nikolaus Schaller wrote:
> The bq27000 and bq27010 have a single byte FLAGS register.
> Other gauges have 16 bit FLAGS registers.
> 
> For reading the FLAGS register it is sufficient to read the single
> register instead of reading RSOC at the next higher address as
> well and then ignore the high byte.
> 
> This does not change functionality but optimizes i2c and hdq
> traffic.
> 
> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
> ---

Matches the datasheet,

Acked-by: Andrew F. Davis <afd@ti.com>

>  drivers/power/bq27xxx_battery.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/power/bq27xxx_battery.c b/drivers/power/bq27xxx_battery.c
> index 45f6ebf..56712b2 100644
> --- a/drivers/power/bq27xxx_battery.c
> +++ b/drivers/power/bq27xxx_battery.c
> @@ -656,8 +656,9 @@ static bool bq27xxx_battery_dead(struct bq27xxx_device_info *di, u16 flags)
>  static int bq27xxx_battery_read_health(struct bq27xxx_device_info *di)
>  {
>  	int flags;
> +	bool has_singe_flag = di->chip == BQ27000 || di->chip == BQ27010;
>  
> -	flags = bq27xxx_read(di, BQ27XXX_REG_FLAGS, false);
> +	flags = bq27xxx_read(di, BQ27XXX_REG_FLAGS, has_singe_flag);
>  	if (flags < 0) {
>  		dev_err(di->dev, "error reading flag register:%d\n", flags);
>  		return flags;
> @@ -760,7 +761,7 @@ static int bq27xxx_battery_current(struct bq27xxx_device_info *di,
>  	}
>  
>  	if (di->chip == BQ27000 || di->chip == BQ27010) {
> -		flags = bq27xxx_read(di, BQ27XXX_REG_FLAGS, false);
> +		flags = bq27xxx_read(di, BQ27XXX_REG_FLAGS, true);
>  		if (flags & BQ27000_FLAG_CHGS) {
>  			dev_dbg(di->dev, "negative current!\n");
>  			curr = -curr;
> 

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web