Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1450116 > unrolled thread

[PATCH 4.6 126/203] drm: add missing drm_mode_set_crtcinfo call

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH 4.6 126/203] drm: add missing drm_mode_set_crtcinfo call Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-07-26 00:20 +0200

#1450116 — [PATCH 4.6 126/203] drm: add missing drm_mode_set_crtcinfo call

4.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tomi Valkeinen <tomi.valkeinen@ti.com>

commit b201e743f42d143f4bcdcb14587caf7cb1d99229 upstream.

When setting mode via MODE_ID property,
drm_atomic_set_mode_prop_for_crtc() does not call
drm_mode_set_crtcinfo() which possibly causes:

"[drm:drm_calc_timestamping_constants [drm]] *ERROR* crtc 32: Can't
calculate constants, dotclock = 0!"

Whether the error is seen depends on the previous data in state->mode,
as state->mode is not cleared when setting new mode.

This patch adds drm_mode_set_crtcinfo() call to
drm_mode_convert_umode(), which is called in both legacy and atomic
paths. This should be fine as there's no reason to call
drm_mode_convert_umode() without also setting the crtc related fields.

drm_mode_set_crtcinfo() is removed from the legacy drm_mode_setcrtc() as
that is no longer needed.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/drm_crtc.c  |    2 --
 drivers/gpu/drm/drm_modes.c |    2 ++
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -2800,8 +2800,6 @@ int drm_mode_setcrtc(struct drm_device *
 			goto out;
 		}
 
-		drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
-
 		/*
 		 * Check whether the primary plane supports the fb pixel format.
 		 * Drivers not implementing the universal planes API use a
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -1518,6 +1518,8 @@ int drm_mode_convert_umode(struct drm_di
 	if (out->status != MODE_OK)
 		goto out;
 
+	drm_mode_set_crtcinfo(out, CRTC_INTERLACE_HALVE_V);
+
 	ret = 0;
 
 out:

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web