Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1446293 > unrolled thread

[PATCH v5 2/2] Bindings documentation for ISSI is31fl319x driver

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v5 2/2] Bindings documentation for ISSI is31fl319x driver "H. Nikolaus Schaller" <hns@goldelico.com> - 2016-07-19 11:50 +0200

#1446293 — [PATCH v5 2/2] Bindings documentation for ISSI is31fl319x driver

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
 .../devicetree/bindings/leds/is31fl319x.txt        | 59 ++++++++++++++++++++++
 1 file changed, 59 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/is31fl319x.txt

diff --git a/Documentation/devicetree/bindings/leds/is31fl319x.txt b/Documentation/devicetree/bindings/leds/is31fl319x.txt
new file mode 100644
index 0000000..03287c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/is31fl319x.txt
@@ -0,0 +1,59 @@
+LEDs connected to is31fl319x LED controller chip
+
+Required properties:
+- compatible : Should be any of
+	"issi,is31fl3190"
+	"issi,is31fl3191"
+	"issi,is31fl3193"
+	"issi,is31fl3196"
+	"issi,is31fl3199"
+	"si-en,sn3199".
+- #address-cells: Must be 1.
+- #size-cells: Must be 0.
+- reg: 0x64, 0x65, 0x66, 0x67.
+
+Optional properties:
+- audio-gain-db : audio gain selection for external analog modulation input.
+	Valid values: 0 - 21, step by 3 (rounded down)
+	Default: 0
+
+Each led is represented as a sub-node of the issi,is31fl319x device.
+There can be less leds subnodes than the chip can support but not more.
+
+Required led sub-node properties:
+- reg : number of LED line
+	Valid values: 1 - number of leds supported by the chip variant.
+
+Optional led sub-node properties:
+- label : see Documentation/devicetree/bindings/leds/common.txt.
+- linux,default-trigger :
+	see Documentation/devicetree/bindings/leds/common.txt.
+- led-max-microamp : (optional)
+	Valid values: 5000 - 40000, step by 5000 (rounded down)
+	Default: 20000 (20 mA)
+	Note: a driver will take the lowest of all led limits since the
+	chip has a single global setting. The lowest value will be chosen
+	due to the PWM specificity, where lower brightness is achieved
+	by reducing the dury-cycle of pulses and not the current, which
+	will always have its peak value equal to led-max-microamp.
+
+Examples:
+
+fancy_leds: leds@65 {
+	compatible = "issi,is31fl3196";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x65>;
+
+	red_aux: led@1 {
+		label = "red:aux";
+		reg = <1>;
+		led-max-microamp = <10000>;
+	};
+
+	green_power: led@5 {
+		label = "green:power";
+		reg = <5>;
+		linux,default-trigger = "default-on";
+	};
+};
-- 
2.7.3

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web