Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1446167 > unrolled thread

[PATCH v8 0/3] Add a new Rockchip usb2 phy driver

Back to article view | Back to linux.kernel

Contents

  [PATCH v8 0/3] Add a new Rockchip usb2 phy driver Frank Wang <frank.wang@rock-chips.com> - 2016-07-19 09:30 +0200
    [PATCH v8 1/3] Documentation: bindings: add DT documentation for Rockchip USB2PHY Frank Wang <frank.wang@rock-chips.com> - 2016-07-19 09:30 +0200

#1446167 — [PATCH v8 0/3] Add a new Rockchip usb2 phy driver

The newer SoCs (rk3366, rk3399) of Rock-chip take a different usb-phy
IP block than rk3288 and before, and most of phy-related registers are
also different from the past, so a new phy driver is required necessarily.

These series patches add phy-rockchip-inno-usb2.c and the corresponding
dt-bindings.

Changes in v8:
 - Added support for rk3399 SoC.
 - Prepare input clock of phy at probe time.
 - Improved sm_work function to handle phy-port state more clearly.

Changes in v7:
 - Renamed functions *usb2phy_resume/*usb2phy_suspend to *usb2phy_power_on/usb2phy_power_off.

Changes in v6:
 - Changed '_' to '-' for otg-id and otg-bvalid property in devicetree bindings.
 - Fixed the output clock would be disabled more than once while phy-port was going to suspend.
 - Improved the driver to avoid the currently empty otg-port would cause null-pointer dereferences.

Changes in v5:
 - Added 'reg' property both in devicetree bindings and driver to match the different phy-blocks.

Changes in v4:
 - Used 'phy-supply' instead of 'vbus_*-supply'.

Changes in v3:
 - Supplemented some hardware-description into the devicetree bindings.
 - Resolved the mapping defect between fixed value in driver and the property
   in devicetree.
 - Code cleanup.

Changes in v2:
 - Specified more hardware-description into the devicetree bindings.
 - Optimized some process of driver.

Frank Wang (3):
  Documentation: bindings: add DT documentation for Rockchip USB2PHY
  phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy
  arm64: dts: rockchip: add usb2-phy support for rk3399

 .../bindings/phy/phy-rockchip-inno-usb2.txt        |   64 ++
 arch/arm64/boot/dts/rockchip/rk3399-evb.dts        |   19 +
 arch/arm64/boot/dts/rockchip/rk3399.dtsi           |   47 +-
 drivers/phy/Kconfig                                |    7 +
 drivers/phy/Makefile                               |    1 +
 drivers/phy/phy-rockchip-inno-usb2.c               |  707 ++++++++++++++++++++
 6 files changed, 844 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
 create mode 100644 drivers/phy/phy-rockchip-inno-usb2.c

-- 
1.7.9.5

[toc] | [next] | [standalone]

#1446177 — [PATCH v8 1/3] Documentation: bindings: add DT documentation for Rockchip USB2PHY

Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
---

Changes in v8: None

Changes in v7: None

Changes in v6:
 - Changed '_' to '-' for otg-id and otg-bvalid property.

Changes in v5:
 - Added 'reg' property to identify the different phy-blocks.

Changes in v4:
 - Used 'phy-supply' instead of 'vbus_*-supply'.

Changes in v3:
 - Added 'clocks' and 'clock-names' optional properties.
 - Specified 'otg-port' and 'host-port' as the sub-node name.

Changes in v2:
 - Changed vbus_host optional property from gpio to regulator.
 - Specified vbus_otg-supply optional property.
 - Specified otg_id and otg_bvalid property.

 .../bindings/phy/phy-rockchip-inno-usb2.txt        |   64 ++++++++++++++++++++
 1 file changed, 64 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt

diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
new file mode 100644
index 0000000..3c29c77
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
@@ -0,0 +1,64 @@
+ROCKCHIP USB2.0 PHY WITH INNO IP BLOCK
+
+Required properties (phy (parent) node):
+ - compatible : should be one of the listed compatibles:
+	* "rockchip,rk3366-usb2phy"
+	* "rockchip,rk3399-usb2phy"
+ - reg : the address offset of grf for usb-phy configuration.
+ - #clock-cells : should be 0.
+ - clock-output-names : specify the 480m output clock name.
+
+Optional properties:
+ - clocks : phandle + phy specifier pair, for the input clock of phy.
+ - clock-names : input clock name of phy, must be "phyclk".
+
+Required nodes : a sub-node is required for each port the phy provides.
+		 The sub-node name is used to identify host or otg port,
+		 and shall be the following entries:
+	* "otg-port" : the name of otg port.
+	* "host-port" : the name of host port.
+
+Required properties (port (child) node):
+ - #phy-cells : must be 0. See ./phy-bindings.txt for details.
+ - interrupts : specify an interrupt for each entry in interrupt-names.
+ - interrupt-names : a list which shall be the following entries:
+	* "otg-id" : for the otg id interrupt.
+	* "otg-bvalid" : for the otg vbus interrupt.
+	* "linestate" : for the host/otg linestate interrupt.
+
+Optional properties:
+ - phy-supply : phandle to a regulator that provides power to VBUS.
+		See ./phy-bindings.txt for details.
+
+Example:
+
+grf: syscon@ff770000 {
+	compatible = "rockchip,rk3366-grf", "syscon", "simple-mfd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+...
+
+	u2phy: usb2-phy@700 {
+		compatible = "rockchip,rk3366-usb2phy";
+		reg = <0x700 0x2c>;
+		#clock-cells = <0>;
+		clock-output-names = "sclk_otgphy0_480m";
+
+		u2phy_otg: otg-port {
+			#phy-cells = <0>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "otg-id", "otg-bvalid", "linestate";
+			status = "okay";
+		};
+
+		u2phy_host: host-port {
+			#phy-cells = <0>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "linestate";
+			status = "okay";
+		};
+	};
+};
-- 
1.7.9.5

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web