Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1444962 > unrolled thread

[PATCH 2/2] net: ethernet: adi: bfin_mac: use phy_ethtool_{get|set}_link_ksettings

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH 2/2] net: ethernet: adi: bfin_mac: use phy_ethtool_{get|set}_link_ksettings Philippe Reynes <tremyfr@gmail.com> - 2016-07-17 01:20 +0200
    Re: [PATCH 2/2] net: ethernet: adi: bfin_mac: use  phy_ethtool_{get|set}_link_ksettings David Miller <davem@davemloft.net> - 2016-07-18 08:30 +0200

#1444962 — [PATCH 2/2] net: ethernet: adi: bfin_mac: use phy_ethtool_{get|set}_link_ksettings

There are two generics functions phy_ethtool_{get|set}_link_ksettings,
so we can use them instead of defining the same code in the driver.

There was a check on CAP_NET_ADMIN in bfin_mac_ethtool_setsettings,
but this check is already done in dev_ethtool, so no need to repeat
it before calling the generic function.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
 drivers/net/ethernet/adi/bfin_mac.c |   25 ++-----------------------
 1 files changed, 2 insertions(+), 23 deletions(-)

diff --git a/drivers/net/ethernet/adi/bfin_mac.c b/drivers/net/ethernet/adi/bfin_mac.c
index 32af9d2..38eaea1 100644
--- a/drivers/net/ethernet/adi/bfin_mac.c
+++ b/drivers/net/ethernet/adi/bfin_mac.c
@@ -449,27 +449,6 @@ static irqreturn_t bfin_mac_wake_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int
-bfin_mac_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
-	if (dev->phydev)
-		return phy_ethtool_gset(dev->phydev, cmd);
-
-	return -EINVAL;
-}
-
-static int
-bfin_mac_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
-	if (!capable(CAP_NET_ADMIN))
-		return -EPERM;
-
-	if (dev->phydev)
-		return phy_ethtool_sset(dev->phydev, cmd);
-
-	return -EINVAL;
-}
-
 static void bfin_mac_ethtool_getdrvinfo(struct net_device *dev,
 					struct ethtool_drvinfo *info)
 {
@@ -547,8 +526,6 @@ static int bfin_mac_ethtool_get_ts_info(struct net_device *dev,
 #endif
 
 static const struct ethtool_ops bfin_mac_ethtool_ops = {
-	.get_settings = bfin_mac_ethtool_getsettings,
-	.set_settings = bfin_mac_ethtool_setsettings,
 	.get_link = ethtool_op_get_link,
 	.get_drvinfo = bfin_mac_ethtool_getdrvinfo,
 	.get_wol = bfin_mac_ethtool_getwol,
@@ -556,6 +533,8 @@ static const struct ethtool_ops bfin_mac_ethtool_ops = {
 #ifdef CONFIG_BFIN_MAC_USE_HWSTAMP
 	.get_ts_info = bfin_mac_ethtool_get_ts_info,
 #endif
+	.get_link_ksettings = phy_ethtool_get_link_ksettings,
+	.set_link_ksettings = phy_ethtool_set_link_ksettings,
 };
 
 /**************************************************************************/
-- 
1.7.4.4

[toc] | [next] | [standalone]

#1445239 — Re: [PATCH 2/2] net: ethernet: adi: bfin_mac: use phy_ethtool_{get|set}_link_ksettings

From: Philippe Reynes <tremyfr@gmail.com>
Date: Sun, 17 Jul 2016 01:10:15 +0200

> There are two generics functions phy_ethtool_{get|set}_link_ksettings,
> so we can use them instead of defining the same code in the driver.
> 
> There was a check on CAP_NET_ADMIN in bfin_mac_ethtool_setsettings,
> but this check is already done in dev_ethtool, so no need to repeat
> it before calling the generic function.
> 
> Signed-off-by: Philippe Reynes <tremyfr@gmail.com>

Applied.

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web