Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1446566 > unrolled thread

[RFC 6/7] Documentation: bindings: add documentation for ir-spi device driver

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [RFC 6/7] Documentation: bindings: add documentation for ir-spi device  driver Andi Shyti <andi.shyti@samsung.com> - 2016-07-19 18:00 +0200

#1446566 — [RFC 6/7] Documentation: bindings: add documentation for ir-spi device driver

Document the ir-spi driver's binding which is a IR led driven
through the SPI line.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
---
 Documentation/devicetree/bindings/media/spi-ir.txt | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/spi-ir.txt

diff --git a/Documentation/devicetree/bindings/media/spi-ir.txt b/Documentation/devicetree/bindings/media/spi-ir.txt
new file mode 100644
index 0000000..532da68
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/spi-ir.txt
@@ -0,0 +1,20 @@
+Device tree bindings for IR LED connected through SPI bus which is used as
+remote controller.
+
+The IR LED switch is connected to the MOSI line of the SPI device and the data
+are delivered thourgh that.
+
+Required properties:
+	- compatible: should be "ir-spi"
+
+Optional properties:
+	- irled,switch: specifies the gpio switch which enables the irled
+
+Example:
+
+        irled@0 {
+                compatible = "ir-spi";
+                reg = <0x0>;
+                spi-max-frequency = <5000000>;
+                irled,switch = <&gpr3 3 0>;
+        };
-- 
2.8.1

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web