Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1441848 > unrolled thread
| Started by | Alexandre Belloni <alexandre.belloni@free-electrons.com> |
|---|---|
| First post | 2016-07-13 00:50 +0200 |
| Last post | 2016-07-14 18:10 +0200 |
| Articles | 2 — 2 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
[PATCH 3/4] ARM: dts: at91: sama5d4_ma5d4: fix regulator names Alexandre Belloni <alexandre.belloni@free-electrons.com> - 2016-07-13 00:50 +0200
Re: [PATCH 3/4] ARM: dts: at91: sama5d4_ma5d4: fix regulator names Marek Vasut <marex@denx.de> - 2016-07-14 18:10 +0200
| From | Alexandre Belloni <alexandre.belloni@free-electrons.com> |
|---|---|
| Date | 2016-07-13 00:50 +0200 |
| Subject | [PATCH 3/4] ARM: dts: at91: sama5d4_ma5d4: fix regulator names |
| Message-ID | <rUeF4-2Ns-43@gated-at.bofh.it> |
vcc_3v3_reg and vcc_mmc1_reg are fixed regulators and don't need a
reg property. Remove their unit-address.
Solves:
Warning (unit_address_vs_reg): Node /fixedregulator@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /fixedregulator@1 has a unit name, but no reg property
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
Cc: Marek Vasut <marex@denx.de>
arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
index e7b2109fc85a..d9ca7f214677 100644
--- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
@@ -106,7 +106,7 @@
};
};
- vcc_3v3_reg: fixedregulator@0 {
+ vcc_3v3_reg: fixedregulator_3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC 3V3";
regulator-min-microvolt = <3300000>;
@@ -115,7 +115,7 @@
regulator-always-on;
};
- vcc_mmc0_reg: fixedregulator@1 {
+ vcc_mmc0_reg: fixedregulator_mmc0 {
compatible = "regulator-fixed";
gpio = <&pioE 15 GPIO_ACTIVE_HIGH>;
regulator-name = "RST_n MCI0";
--
2.8.1
[toc] | [next] | [standalone]
| From | Marek Vasut <marex@denx.de> |
|---|---|
| Date | 2016-07-14 18:10 +0200 |
| Message-ID | <rURn4-3qz-15@gated-at.bofh.it> |
| In reply to | #1441848 |
On 07/13/2016 12:45 AM, Alexandre Belloni wrote:
> vcc_3v3_reg and vcc_mmc1_reg are fixed regulators and don't need a
> reg property. Remove their unit-address.
>
> Solves:
> Warning (unit_address_vs_reg): Node /fixedregulator@0 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /fixedregulator@1 has a unit name, but no reg property
>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Reviewed-by: Marek Vasut <marex@denx.de>
> ---
> Cc: Marek Vasut <marex@denx.de>
> arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
> index e7b2109fc85a..d9ca7f214677 100644
> --- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
> +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
> @@ -106,7 +106,7 @@
> };
> };
>
> - vcc_3v3_reg: fixedregulator@0 {
> + vcc_3v3_reg: fixedregulator_3v3 {
> compatible = "regulator-fixed";
> regulator-name = "VCC 3V3";
> regulator-min-microvolt = <3300000>;
> @@ -115,7 +115,7 @@
> regulator-always-on;
> };
>
> - vcc_mmc0_reg: fixedregulator@1 {
> + vcc_mmc0_reg: fixedregulator_mmc0 {
> compatible = "regulator-fixed";
> gpio = <&pioE 15 GPIO_ACTIVE_HIGH>;
> regulator-name = "RST_n MCI0";
>
--
Best regards,
Marek Vasut
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web