Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1440426 > unrolled thread

[PATCH 00/15] net: thunderx: Add support for 81xx and 83xx

Back to article view | Back to linux.kernel

Contents

  [PATCH 00/15] net: thunderx: Add support for 81xx and 83xx  sunil.kovvuri@gmail.com - 2016-07-11 12:10 +0200
    [PATCH 15/15] net: thunderx: Don't set mac address for secondary Qset VFs sunil.kovvuri@gmail.com - 2016-07-11 12:10 +0200
    [PATCH 02/15] net: thunderx: Add VNIC's PCI devid on future chips sunil.kovvuri@gmail.com - 2016-07-11 12:10 +0200
    [PATCH 07/15] net: thunderx: Support for different LMAC types within BGX sunil.kovvuri@gmail.com - 2016-07-11 12:10 +0200

#1440426 — [PATCH 00/15] net: thunderx: Add support for 81xx and 83xx

From: Sunil Goutham <sgoutham@cavium.com>

This patch series adds support for VNIC on 81xx and 83xx SOCs. 
81xx/83xx is different from 88xx in terms of capabilities and different 
types of interfaces supported (eg: QSGMII, RGMII) and have DLMs instead
of QLMs which allows single BGX to have interfaces of different LMAC types. 

Also included some patches which are common for all 88xx/81xx/83xx
SOCs like using netdev's name while registering irqs, reset receive
queue stats and some cleanup changes.

Jerin Jacob (1):
  net: thunderx: Reset RXQ HW stats when interface is brought down

Radoslaw Biernacki (1):
  net: thunderx: Improvement for MBX interface debug messages

Sunil Goutham (13):
  net: thunderx: Moved HW capability info from macros to structure
  net: thunderx: Add VNIC's PCI devid on future chips
  net: thunderx: Add support for 81xx and 83xx chips
  net: thunderx: Set queue count based on number of CPUs
  net: thunderx: Enable CQE_RX desc's extension fields
  net: thunderx: Enable mailbox interrupts on 81xx/83xx
  net: thunderx: Support for different LMAC types within BGX
  net: thunderx: Add 81xx support to BGX driver
  net: thunderx: Add QSGMII interface type support
  net: thunderx: Add RGMII interface type support
  net: thunderx: Use netdev's name for naming VF's interrupts
  net: thunderx: Use skb_add_rx_frag() for split buffer Rx pkts
  net: thunderx: Don't set mac address for secondary Qset VFs

 drivers/net/ethernet/cavium/Kconfig                |  10 +
 drivers/net/ethernet/cavium/thunder/Makefile       |   1 +
 drivers/net/ethernet/cavium/thunder/nic.h          |  85 +++--
 drivers/net/ethernet/cavium/thunder/nic_main.c     | 351 ++++++++++++++----
 drivers/net/ethernet/cavium/thunder/nic_reg.h      |   2 +
 drivers/net/ethernet/cavium/thunder/nicvf_main.c   |  51 ++-
 drivers/net/ethernet/cavium/thunder/nicvf_queues.c |  59 +--
 drivers/net/ethernet/cavium/thunder/nicvf_queues.h |   5 +-
 drivers/net/ethernet/cavium/thunder/thunder_bgx.c  | 410 ++++++++++++++-------
 drivers/net/ethernet/cavium/thunder/thunder_bgx.h  |  28 +-
 drivers/net/ethernet/cavium/thunder/thunder_xcv.c  | 237 ++++++++++++
 11 files changed, 939 insertions(+), 300 deletions(-)
 create mode 100644 drivers/net/ethernet/cavium/thunder/thunder_xcv.c

-- 
2.7.4

[toc] | [next] | [standalone]

#1440427 — [PATCH 15/15] net: thunderx: Don't set mac address for secondary Qset VFs

From: Sunil Goutham <sgoutham@cavium.com>

Set MAC addresses only for primary VF's and don't for
secondary VFs.

Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
---
 drivers/net/ethernet/cavium/thunder/nic_main.c   | 2 +-
 drivers/net/ethernet/cavium/thunder/nicvf_main.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/cavium/thunder/nic_main.c b/drivers/net/ethernet/cavium/thunder/nic_main.c
index 6524cfc..69e329e 100644
--- a/drivers/net/ethernet/cavium/thunder/nic_main.c
+++ b/drivers/net/ethernet/cavium/thunder/nic_main.c
@@ -174,7 +174,7 @@ static void nic_mbx_send_ready(struct nicpf *nic, int vf)
 
 	mbx.nic_cfg.tns_mode = NIC_TNS_BYPASS_MODE;
 
-	if (vf < MAX_LMAC) {
+	if (vf < nic->num_vf_en) {
 		bgx_idx = NIC_GET_BGX_FROM_VF_LMAC_MAP(nic->vf_lmac_map[vf]);
 		lmac = NIC_GET_LMAC_FROM_VF_LMAC_MAP(nic->vf_lmac_map[vf]);
 
diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_main.c b/drivers/net/ethernet/cavium/thunder/nicvf_main.c
index 300416a..4a084ab 100644
--- a/drivers/net/ethernet/cavium/thunder/nicvf_main.c
+++ b/drivers/net/ethernet/cavium/thunder/nicvf_main.c
@@ -1209,7 +1209,7 @@ int nicvf_open(struct net_device *netdev)
 	}
 
 	/* Check if we got MAC address from PF or else generate a radom MAC */
-	if (is_zero_ether_addr(netdev->dev_addr)) {
+	if (!nic->sqs_mode && is_zero_ether_addr(netdev->dev_addr)) {
 		eth_hw_addr_random(netdev);
 		nicvf_hw_set_mac_addr(nic, netdev);
 	}
-- 
2.7.4

[toc] | [prev] | [next] | [standalone]

#1440428 — [PATCH 02/15] net: thunderx: Add VNIC's PCI devid on future chips

From: Sunil Goutham <sgoutham@cavium.com>

This patch adds PCI device IDs of VNIC on newer chips and also
registers VF driver with them. Device id remains same for all
versions of chips but subsystem device id changes.

Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
---
 drivers/net/ethernet/cavium/thunder/nic.h        | 10 +++++++++-
 drivers/net/ethernet/cavium/thunder/nicvf_main.c | 14 ++++++++++++--
 2 files changed, 21 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/cavium/thunder/nic.h b/drivers/net/ethernet/cavium/thunder/nic.h
index 66b499b..6b0b240 100644
--- a/drivers/net/ethernet/cavium/thunder/nic.h
+++ b/drivers/net/ethernet/cavium/thunder/nic.h
@@ -21,7 +21,15 @@
 #define	PCI_DEVICE_ID_THUNDER_BGX		0xA026
 
 /* Subsystem device IDs */
-#define PCI_SUBSYS_DEVID_88XX_NIC_PF           0xA11E
+#define PCI_SUBSYS_DEVID_88XX_NIC_PF		0xA11E
+#define PCI_SUBSYS_DEVID_81XX_NIC_PF		0xA21E
+#define PCI_SUBSYS_DEVID_83XX_NIC_PF		0xA31E
+
+#define PCI_SUBSYS_DEVID_88XX_PASS1_NIC_VF	0xA11E
+#define PCI_SUBSYS_DEVID_88XX_NIC_VF		0xA134
+#define PCI_SUBSYS_DEVID_81XX_NIC_VF		0xA234
+#define PCI_SUBSYS_DEVID_83XX_NIC_VF		0xA334
+
 
 /* PCI BAR nos */
 #define	PCI_CFG_REG_BAR_NUM		0
diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_main.c b/drivers/net/ethernet/cavium/thunder/nicvf_main.c
index a19e73f..0c10635 100644
--- a/drivers/net/ethernet/cavium/thunder/nicvf_main.c
+++ b/drivers/net/ethernet/cavium/thunder/nicvf_main.c
@@ -29,10 +29,20 @@
 static const struct pci_device_id nicvf_id_table[] = {
 	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_CAVIUM,
 			 PCI_DEVICE_ID_THUNDER_NIC_VF,
-			 PCI_VENDOR_ID_CAVIUM, 0xA134) },
+			 PCI_VENDOR_ID_CAVIUM,
+			 PCI_SUBSYS_DEVID_88XX_NIC_VF) },
 	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_CAVIUM,
 			 PCI_DEVICE_ID_THUNDER_PASS1_NIC_VF,
-			 PCI_VENDOR_ID_CAVIUM, 0xA11E) },
+			 PCI_VENDOR_ID_CAVIUM,
+			 PCI_SUBSYS_DEVID_88XX_PASS1_NIC_VF) },
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_CAVIUM,
+			 PCI_DEVICE_ID_THUNDER_NIC_VF,
+			 PCI_VENDOR_ID_CAVIUM,
+			 PCI_SUBSYS_DEVID_81XX_NIC_VF) },
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_CAVIUM,
+			 PCI_DEVICE_ID_THUNDER_NIC_VF,
+			 PCI_VENDOR_ID_CAVIUM,
+			 PCI_SUBSYS_DEVID_83XX_NIC_VF) },
 	{ 0, }  /* end of table */
 };
 
-- 
2.7.4

[toc] | [prev] | [next] | [standalone]

#1440429 — [PATCH 07/15] net: thunderx: Support for different LMAC types within BGX

From: Sunil Goutham <sgoutham@cavium.com>

On 88xx all LMACs in a BGX will be in same mode but on 81xx
BGX can be split as two and there can be LMACs configured in
different modes.

These changes move lmac_type, lane2serdes fields into per lmac
struct from BGX struct. Got rid of qlm_mode field which has become
redundant with these changes. And now no of valid LMACs is read
from CSRs configured by low level firmware and figuring out the
same based on QLM mode is discarded

Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
---
 drivers/net/ethernet/cavium/thunder/thunder_bgx.c | 224 ++++++++++------------
 drivers/net/ethernet/cavium/thunder/thunder_bgx.h |  10 -
 2 files changed, 98 insertions(+), 136 deletions(-)

diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
index 63a39ac..4497427 100644
--- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
+++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
@@ -28,6 +28,9 @@ struct lmac {
 	struct bgx		*bgx;
 	int			dmac;
 	u8			mac[ETH_ALEN];
+	u8                      lmac_type;
+	u8                      lane_to_sds;
+	bool                    use_training;
 	bool			link_up;
 	int			lmacid; /* ID within BGX */
 	int			lmacid_bd; /* ID on board */
@@ -43,12 +46,8 @@ struct lmac {
 
 struct bgx {
 	u8			bgx_id;
-	u8			qlm_mode;
 	struct	lmac		lmac[MAX_LMAC_PER_BGX];
 	int			lmac_count;
-	int                     lmac_type;
-	int                     lane_to_sds;
-	int			use_training;
 	void __iomem		*reg_base;
 	struct pci_dev		*pdev;
 };
@@ -418,9 +417,10 @@ static int bgx_lmac_sgmii_init(struct bgx *bgx, int lmacid)
 	return 0;
 }
 
-static int bgx_lmac_xaui_init(struct bgx *bgx, int lmacid, int lmac_type)
+static int bgx_lmac_xaui_init(struct bgx *bgx, struct lmac *lmac)
 {
 	u64 cfg;
+	int lmacid = lmac->lmacid;
 
 	/* Reset SPU */
 	bgx_reg_modify(bgx, lmacid, BGX_SPUX_CONTROL1, SPU_CTL_RESET);
@@ -436,7 +436,7 @@ static int bgx_lmac_xaui_init(struct bgx *bgx, int lmacid, int lmac_type)
 
 	bgx_reg_modify(bgx, lmacid, BGX_SPUX_CONTROL1, SPU_CTL_LOW_POWER);
 	/* Set interleaved running disparity for RXAUI */
-	if (bgx->lmac_type != BGX_MODE_RXAUI)
+	if (lmac->lmac_type != BGX_MODE_RXAUI)
 		bgx_reg_modify(bgx, lmacid,
 			       BGX_SPUX_MISC_CONTROL, SPU_MISC_CTL_RX_DIS);
 	else
@@ -451,7 +451,7 @@ static int bgx_lmac_xaui_init(struct bgx *bgx, int lmacid, int lmac_type)
 	cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_INT);
 	bgx_reg_write(bgx, lmacid, BGX_SPUX_INT, cfg);
 
-	if (bgx->use_training) {
+	if (lmac->use_training) {
 		bgx_reg_write(bgx, lmacid, BGX_SPUX_BR_PMD_LP_CUP, 0x00);
 		bgx_reg_write(bgx, lmacid, BGX_SPUX_BR_PMD_LD_CUP, 0x00);
 		bgx_reg_write(bgx, lmacid, BGX_SPUX_BR_PMD_LD_REP, 0x00);
@@ -474,9 +474,9 @@ static int bgx_lmac_xaui_init(struct bgx *bgx, int lmacid, int lmac_type)
 	bgx_reg_write(bgx, lmacid, BGX_SPUX_AN_CONTROL, cfg);
 
 	cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_AN_ADV);
-	if (bgx->lmac_type == BGX_MODE_10G_KR)
+	if (lmac->lmac_type == BGX_MODE_10G_KR)
 		cfg |= (1 << 23);
-	else if (bgx->lmac_type == BGX_MODE_40G_KR)
+	else if (lmac->lmac_type == BGX_MODE_40G_KR)
 		cfg |= (1 << 24);
 	else
 		cfg &= ~((1 << 23) | (1 << 24));
@@ -511,11 +511,11 @@ static int bgx_xaui_check_link(struct lmac *lmac)
 {
 	struct bgx *bgx = lmac->bgx;
 	int lmacid = lmac->lmacid;
-	int lmac_type = bgx->lmac_type;
+	int lmac_type = lmac->lmac_type;
 	u64 cfg;
 
 	bgx_reg_modify(bgx, lmacid, BGX_SPUX_MISC_CONTROL, SPU_MISC_CTL_RX_DIS);
-	if (bgx->use_training) {
+	if (lmac->use_training) {
 		cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_INT);
 		if (!(cfg & (1ull << 13))) {
 			cfg = (1ull << 13) | (1ull << 14);
@@ -556,7 +556,7 @@ static int bgx_xaui_check_link(struct lmac *lmac)
 			       BGX_SPUX_STATUS2, SPU_STATUS2_RCVFLT);
 	if (bgx_reg_read(bgx, lmacid, BGX_SPUX_STATUS2) & SPU_STATUS2_RCVFLT) {
 		dev_err(&bgx->pdev->dev, "Receive fault, retry training\n");
-		if (bgx->use_training) {
+		if (lmac->use_training) {
 			cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_INT);
 			if (!(cfg & (1ull << 13))) {
 				cfg = (1ull << 13) | (1ull << 14);
@@ -599,7 +599,7 @@ static int bgx_xaui_check_link(struct lmac *lmac)
 	/* Rx local/remote fault seen.
 	 * Do lmac reinit to see if condition recovers
 	 */
-	bgx_lmac_xaui_init(bgx, lmacid, bgx->lmac_type);
+	bgx_lmac_xaui_init(bgx, lmac);
 
 	return -1;
 }
@@ -623,7 +623,7 @@ static void bgx_poll_for_link(struct work_struct *work)
 	if ((spu_link & SPU_STATUS1_RCV_LNK) &&
 	    !(smu_link & SMU_RX_CTL_STATUS)) {
 		lmac->link_up = 1;
-		if (lmac->bgx->lmac_type == BGX_MODE_XLAUI)
+		if (lmac->lmac_type == BGX_MODE_XLAUI)
 			lmac->last_speed = 40000;
 		else
 			lmac->last_speed = 10000;
@@ -657,13 +657,13 @@ static int bgx_lmac_enable(struct bgx *bgx, u8 lmacid)
 	lmac = &bgx->lmac[lmacid];
 	lmac->bgx = bgx;
 
-	if (bgx->lmac_type == BGX_MODE_SGMII) {
+	if (lmac->lmac_type == BGX_MODE_SGMII) {
 		lmac->is_sgmii = 1;
 		if (bgx_lmac_sgmii_init(bgx, lmacid))
 			return -1;
 	} else {
 		lmac->is_sgmii = 0;
-		if (bgx_lmac_xaui_init(bgx, lmacid, bgx->lmac_type))
+		if (bgx_lmac_xaui_init(bgx, lmac))
 			return -1;
 	}
 
@@ -685,10 +685,10 @@ static int bgx_lmac_enable(struct bgx *bgx, u8 lmacid)
 	/* Restore default cfg, incase low level firmware changed it */
 	bgx_reg_write(bgx, lmacid, BGX_CMRX_RX_DMAC_CTL, 0x03);
 
-	if ((bgx->lmac_type != BGX_MODE_XFI) &&
-	    (bgx->lmac_type != BGX_MODE_XLAUI) &&
-	    (bgx->lmac_type != BGX_MODE_40G_KR) &&
-	    (bgx->lmac_type != BGX_MODE_10G_KR)) {
+	if ((lmac->lmac_type != BGX_MODE_XFI) &&
+	    (lmac->lmac_type != BGX_MODE_XLAUI) &&
+	    (lmac->lmac_type != BGX_MODE_40G_KR) &&
+	    (lmac->lmac_type != BGX_MODE_10G_KR)) {
 		if (!lmac->phydev)
 			return -ENODEV;
 
@@ -753,76 +753,19 @@ static void bgx_lmac_disable(struct bgx *bgx, u8 lmacid)
 
 	bgx_flush_dmac_addrs(bgx, lmacid);
 
-	if ((bgx->lmac_type != BGX_MODE_XFI) &&
-	    (bgx->lmac_type != BGX_MODE_XLAUI) &&
-	    (bgx->lmac_type != BGX_MODE_40G_KR) &&
-	    (bgx->lmac_type != BGX_MODE_10G_KR) && lmac->phydev)
+	if ((lmac->lmac_type != BGX_MODE_XFI) &&
+	    (lmac->lmac_type != BGX_MODE_XLAUI) &&
+	    (lmac->lmac_type != BGX_MODE_40G_KR) &&
+	    (lmac->lmac_type != BGX_MODE_10G_KR) && lmac->phydev)
 		phy_disconnect(lmac->phydev);
 
 	lmac->phydev = NULL;
 }
 
-static void bgx_set_num_ports(struct bgx *bgx)
-{
-	u64 lmac_count;
-
-	switch (bgx->qlm_mode) {
-	case QLM_MODE_SGMII:
-		bgx->lmac_count = 4;
-		bgx->lmac_type = BGX_MODE_SGMII;
-		bgx->lane_to_sds = 0;
-		break;
-	case QLM_MODE_XAUI_1X4:
-		bgx->lmac_count = 1;
-		bgx->lmac_type = BGX_MODE_XAUI;
-		bgx->lane_to_sds = 0xE4;
-			break;
-	case QLM_MODE_RXAUI_2X2:
-		bgx->lmac_count = 2;
-		bgx->lmac_type = BGX_MODE_RXAUI;
-		bgx->lane_to_sds = 0xE4;
-			break;
-	case QLM_MODE_XFI_4X1:
-		bgx->lmac_count = 4;
-		bgx->lmac_type = BGX_MODE_XFI;
-		bgx->lane_to_sds = 0;
-		break;
-	case QLM_MODE_XLAUI_1X4:
-		bgx->lmac_count = 1;
-		bgx->lmac_type = BGX_MODE_XLAUI;
-		bgx->lane_to_sds = 0xE4;
-		break;
-	case QLM_MODE_10G_KR_4X1:
-		bgx->lmac_count = 4;
-		bgx->lmac_type = BGX_MODE_10G_KR;
-		bgx->lane_to_sds = 0;
-		bgx->use_training = 1;
-		break;
-	case QLM_MODE_40G_KR4_1X4:
-		bgx->lmac_count = 1;
-		bgx->lmac_type = BGX_MODE_40G_KR;
-		bgx->lane_to_sds = 0xE4;
-		bgx->use_training = 1;
-		break;
-	default:
-		bgx->lmac_count = 0;
-		break;
-	}
-
-	/* Check if low level firmware has programmed LMAC count
-	 * based on board type, if yes consider that otherwise
-	 * the default static values
-	 */
-	lmac_count = bgx_reg_read(bgx, 0, BGX_CMR_RX_LMACS) & 0x7;
-	if (lmac_count != 4)
-		bgx->lmac_count = lmac_count;
-}
-
 static void bgx_init_hw(struct bgx *bgx)
 {
 	int i;
-
-	bgx_set_num_ports(bgx);
+	struct lmac *lmac;
 
 	bgx_reg_modify(bgx, 0, BGX_CMR_GLOBAL_CFG, CMR_GLOBAL_CFG_FCS_STRIP);
 	if (bgx_reg_read(bgx, 0, BGX_CMR_BIST_STATUS))
@@ -830,17 +773,9 @@ static void bgx_init_hw(struct bgx *bgx)
 
 	/* Set lmac type and lane2serdes mapping */
 	for (i = 0; i < bgx->lmac_count; i++) {
-		if (bgx->lmac_type == BGX_MODE_RXAUI) {
-			if (i)
-				bgx->lane_to_sds = 0x0e;
-			else
-				bgx->lane_to_sds = 0x04;
-			bgx_reg_write(bgx, i, BGX_CMRX_CFG,
-				      (bgx->lmac_type << 8) | bgx->lane_to_sds);
-			continue;
-		}
+		lmac = &bgx->lmac[i];
 		bgx_reg_write(bgx, i, BGX_CMRX_CFG,
-			      (bgx->lmac_type << 8) | (bgx->lane_to_sds + i));
+			      (lmac->lmac_type << 8) | lmac->lane_to_sds);
 		bgx->lmac[i].lmacid_bd = lmac_count;
 		lmac_count++;
 	}
@@ -863,58 +798,95 @@ static void bgx_init_hw(struct bgx *bgx)
 		bgx_reg_write(bgx, 0, BGX_CMR_RX_STREERING + (i * 8), 0x00);
 }
 
-static void bgx_get_qlm_mode(struct bgx *bgx)
+static void bgx_print_qlm_mode(struct bgx *bgx, u8 lmacid)
 {
 	struct device *dev = &bgx->pdev->dev;
-	int lmac_type;
-	int train_en;
-
-	/* Read LMAC0 type to figure out QLM mode
-	 * This is configured by low level firmware
-	 */
-	lmac_type = bgx_reg_read(bgx, 0, BGX_CMRX_CFG);
-	lmac_type = (lmac_type >> 8) & 0x07;
+	struct lmac *lmac;
+	char str[20];
 
-	train_en = bgx_reg_read(bgx, 0, BGX_SPUX_BR_PMD_CRTL) &
-				SPU_PMD_CRTL_TRAIN_EN;
+	lmac = &bgx->lmac[lmacid];
+	sprintf(str, "BGX%d QLM mode", bgx->bgx_id);
 
-	switch (lmac_type) {
+	switch (lmac->lmac_type) {
 	case BGX_MODE_SGMII:
-		bgx->qlm_mode = QLM_MODE_SGMII;
-		dev_info(dev, "BGX%d QLM mode: SGMII\n", bgx->bgx_id);
+		dev_info(dev, "%s: SGMII\n", (char *)str);
 		break;
 	case BGX_MODE_XAUI:
-		bgx->qlm_mode = QLM_MODE_XAUI_1X4;
-		dev_info(dev, "BGX%d QLM mode: XAUI\n", bgx->bgx_id);
+		dev_info(dev, "%s: XAUI\n", (char *)str);
 		break;
 	case BGX_MODE_RXAUI:
-		bgx->qlm_mode = QLM_MODE_RXAUI_2X2;
-		dev_info(dev, "BGX%d QLM mode: RXAUI\n", bgx->bgx_id);
+		dev_info(dev, "%s: RXAUI\n", (char *)str);
 		break;
 	case BGX_MODE_XFI:
-		if (!train_en) {
-			bgx->qlm_mode = QLM_MODE_XFI_4X1;
-			dev_info(dev, "BGX%d QLM mode: XFI\n", bgx->bgx_id);
-		} else {
-			bgx->qlm_mode = QLM_MODE_10G_KR_4X1;
-			dev_info(dev, "BGX%d QLM mode: 10G_KR\n", bgx->bgx_id);
-		}
+		if (!lmac->use_training)
+			dev_info(dev, "%s: XFI\n", (char *)str);
+		else
+			dev_info(dev, "%s: 10G_KR\n", (char *)str);
 		break;
 	case BGX_MODE_XLAUI:
-		if (!train_en) {
-			bgx->qlm_mode = QLM_MODE_XLAUI_1X4;
-			dev_info(dev, "BGX%d QLM mode: XLAUI\n", bgx->bgx_id);
-		} else {
-			bgx->qlm_mode = QLM_MODE_40G_KR4_1X4;
-			dev_info(dev, "BGX%d QLM mode: 40G_KR4\n", bgx->bgx_id);
-		}
+		if (!lmac->use_training)
+			dev_info(dev, "%s: XLAUI\n", (char *)str);
+		else
+			dev_info(dev, "%s: 40G_KR4\n", (char *)str);
 		break;
 	default:
-		bgx->qlm_mode = QLM_MODE_SGMII;
-		dev_info(dev, "BGX%d QLM default mode: SGMII\n", bgx->bgx_id);
+		dev_info(dev, "%s: INVALID\n", (char *)str);
 	}
 }
 
+static void lmac_set_lane2sds(struct lmac *lmac)
+{
+	switch (lmac->lmac_type) {
+	case BGX_MODE_SGMII:
+	case BGX_MODE_XFI:
+		lmac->lane_to_sds = lmac->lmacid;
+		break;
+	case BGX_MODE_XAUI:
+	case BGX_MODE_XLAUI:
+		lmac->lane_to_sds = 0xE4;
+		break;
+	case BGX_MODE_RXAUI:
+		lmac->lane_to_sds = (lmac->lmacid) ? 0xE : 0x4;
+		break;
+	default:
+		lmac->lane_to_sds = 0;
+		break;
+	}
+}
+
+static void bgx_set_lmac_config(struct bgx *bgx, u8 idx)
+{
+	struct lmac *lmac;
+	u64 cmr_cfg;
+
+	lmac = &bgx->lmac[idx];
+	lmac->lmacid = idx;
+
+	/* Read LMAC0 type to figure out QLM mode
+	 * This is configured by low level firmware
+	 */
+	cmr_cfg = bgx_reg_read(bgx, 0, BGX_CMRX_CFG);
+	lmac->lmac_type = (cmr_cfg >> 8) & 0x07;
+	lmac->use_training =
+		bgx_reg_read(bgx, 0, BGX_SPUX_BR_PMD_CRTL) &
+			SPU_PMD_CRTL_TRAIN_EN;
+	lmac_set_lane2sds(lmac);
+}
+
+static void bgx_get_qlm_mode(struct bgx *bgx)
+{
+	u8  idx;
+
+	/* It is assumed that low level firmware sets this value */
+	bgx->lmac_count = bgx_reg_read(bgx, 0, BGX_CMR_RX_LMACS) & 0x7;
+	if (bgx->lmac_count > MAX_LMAC_PER_BGX)
+		bgx->lmac_count = MAX_LMAC_PER_BGX;
+
+	for (idx = 0; idx < bgx->lmac_count; idx++)
+		bgx_set_lmac_config(bgx, idx);
+	bgx_print_qlm_mode(bgx, 0);
+}
+
 #ifdef CONFIG_ACPI
 
 static int acpi_get_mac_address(struct device *dev, struct acpi_device *adev,
diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.h b/drivers/net/ethernet/cavium/thunder/thunder_bgx.h
index 9f5e49a..b7b91c8 100644
--- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.h
+++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.h
@@ -217,14 +217,4 @@ enum LMAC_TYPE {
 	BGX_MODE_40G_KR = 4,/* 4 lanes, 10.3125 Gbaud */
 };
 
-enum qlm_mode {
-	QLM_MODE_SGMII,         /* SGMII, each lane independent */
-	QLM_MODE_XAUI_1X4,      /* 1 XAUI or DXAUI, 4 lanes */
-	QLM_MODE_RXAUI_2X2,     /* 2 RXAUI, 2 lanes each */
-	QLM_MODE_XFI_4X1,       /* 4 XFI, 1 lane each */
-	QLM_MODE_XLAUI_1X4,     /* 1 XLAUI, 4 lanes each */
-	QLM_MODE_10G_KR_4X1,    /* 4 10GBASE-KR, 1 lane each */
-	QLM_MODE_40G_KR4_1X4,   /* 1 40GBASE-KR4, 4 lanes each */
-};
-
 #endif /* THUNDER_BGX_H */
-- 
2.7.4

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web