Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1438281 > unrolled thread

[GIT PULL] clockevents for 4.8

Started byDaniel Lezcano <daniel.lezcano@linaro.org>
First post2016-07-07 10:10 +0200
Last post2016-07-07 11:00 +0200
Articles 20 on this page of 71 — 1 participant

Back to article view | Back to linux.kernel

Contents

  [GIT PULL] clockevents for 4.8 Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:10 +0200
    [PATCH 30/93] clocksource/drivers/h8300_timer8: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:10 +0200
    [PATCH 04/93] clocksource/drivers/samsung_pwm: Fix typo in Kconfig Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:10 +0200
    [PATCH 18/93] clocksource/drivers/st_lpc: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:10 +0200
    [PATCH 42/93] clocksource/drivers/tango_xtal: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:10 +0200
    [PATCH 57/93] clocksource/drivers/stm32: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:10 +0200
    [PATCH 11/93] of: Add a new macro to declare_of for one parameter function returning a value Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:10 +0200
    [PATCH 27/93] clocksource/drivers/arm_arch_timer: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:10 +0200
    [PATCH 59/93] clocksource/drivers/ti-32k: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:10 +0200
    [PATCH 54/93] clocksource/drivers/integrator-ap: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:10 +0200
    [PATCH 58/93] clocksource/drivers/sun5i: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:10 +0200
    [PATCH 19/93] clocksource/drivers/dw_apb_timer: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:10 +0200
    [PATCH 01/93] clocksource/drivers/armada-370-xp: Make syscore_ops static Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:10 +0200
      [PATCH 69/93] clocksource/drivers/nps: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:20 +0200
      [PATCH 71/93] clocksource/drivers/oxnas-rps: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:20 +0200
      [PATCH 51/93] clocksource/drivers/atmel-st: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:20 +0200
      [PATCH 55/93] clocksource/drivers/keystone: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:20 +0200
      [PATCH 73/93] clk: Add missing clk_get_sys() stub Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:20 +0200
      [PATCH 52/93] clocksource/drivers/prima2: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:20 +0200
      [PATCH 56/93] clocksource/drivers/sp804: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:20 +0200
      [PATCH 53/93] clocksource/drivers/imx-gpt: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:20 +0200
      [PATCH 70/93] clocksource/drivers/arc: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:20 +0200
      [PATCH 50/93] clocksource/drivers/atmel-pit: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:20 +0200
      [PATCH 44/93] clocksource/drivers/time-armada-370-xp: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:30 +0200
      [PATCH 45/93] clocksource/drivers/time-efm32: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:30 +0200
      [PATCH 40/93] clocksource/drivers/samsung_pwm: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:30 +0200
      [PATCH 43/93] clocksource/drivers/tegra20: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:30 +0200
      [PATCH 65/93] clocksource/drivers/microblaze: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:30 +0200
      [PATCH 48/93] clocksource/drivers/pistachio: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:30 +0200
      [PATCH 39/93] clocksource/drivers/qcom: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:30 +0200
      [PATCH 34/93] clocksource/drivers/moxart: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:30 +0200
      [PATCH 60/93] clocksource/drivers/u300: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:30 +0200
      [PATCH 64/93] clocksource/drivers/zevio: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:30 +0200
      [PATCH 63/93] clocksource/drivers/vt8500: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:30 +0200
      [PATCH 49/93] clocksource/drivers/atlas7: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:30 +0200
      [PATCH 66/93] clocksource/drivers/ralink: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:30 +0200
      [PATCH 61/93] clocksource/drivers/versatile: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:30 +0200
      [PATCH 67/93] clocksource/drivers/nios2: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:30 +0200
      [PATCH 62/93] clocksource/drivers/vf_pit_timer: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:30 +0200
      [PATCH 47/93] clocksource/drivers/orion: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:30 +0200
      [PATCH 68/93] clocksource/drivers/smp_twd: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:30 +0200
      [PATCH 36/93] clocksource/drivers/mxs: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:30 +0200
      [PATCH 46/93] clocksource/drivers/time-lpc32xx: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:30 +0200
      [PATCH 41/93] clocksource/drivers/sun4i: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:30 +0200
      [PATCH 35/93] clocksource/drivers/mps2-timer: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:40 +0200
      [PATCH 31/93] clocksource/drivers/h8300_tpu: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:40 +0200
      [PATCH 22/93] clocksource/drivers/armv7m_systick: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:40 +0200
      [PATCH 24/93] clocksource/drivers/bcm_kona: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:40 +0200
      [PATCH 15/93] clocksource/drivers/exynos_mct: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:40 +0200
      [PATCH 21/93] clocksource/drivers/digicolor: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:40 +0200
      [PATCH 32/93] clocksource/drivers/meson6_timer.c: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:40 +0200
      [PATCH 28/93] clocksource/drivers/arm_global_timer: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:40 +0200
      [PATCH 20/93] clocksource/drivers/clps711x: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:40 +0200
      [PATCH 25/93] clocksource/drivers/clksrc-dbx500: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:40 +0200
      [PATCH 26/93] clocksource/drivers/fsl_ftm_timer: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:40 +0200
      [PATCH 29/93] clocksource/drivers/h8300_timer16: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:40 +0200
      [PATCH 23/93] clocksource/drivers/bcm2835_timer: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:40 +0200
      [PATCH 33/93] clocksource/drivers/mips-gic-timer: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:40 +0200
      [PATCH 17/93] clocksource/drivers/cadence_ttc: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:50 +0200
      [PATCH 14/93] clocksource/drivers/mtk_timer: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:50 +0200
      [PATCH 16/93] clocksource/drivers/asm9260: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:50 +0200
      [PATCH 07/93] clocksource/drivers/rockchip: Add support for the rk3399 SoC Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 10:50 +0200
      [PATCH 03/93] clocksource/drivers/samsung_pwm_timer: Fix endian accessors Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 11:00 +0200
      [PATCH 05/93] dt-bindings: Document rk3399 rk-timer bindings Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 11:00 +0200
      [PATCH 10/93] dt-bindings: clocksource: Add Oxford Semiconductor RPS Timer bindings Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 11:00 +0200
      [PATCH 02/93] clocksource/drivers/digicolor: Fix warning of non-static function Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 11:00 +0200
      [PATCH 13/93] clocksource/drivers/rockchip_timer: Convert init function to return error Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 11:00 +0200
      [PATCH 12/93] clocksource/drivers/clksrc-probe: Introduce init functions with return code Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 11:00 +0200
      [PATCH 06/93] clocksource/drivers/rockchip: Add the dynamic irq flag to the timer Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 11:00 +0200
      [PATCH 08/93] arm64: dts: rockchip: Add rktimer device node for rk3399 Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 11:00 +0200
      [PATCH 09/93] clocksource/drivers/oxnas-rps: Add Oxford Semiconductor RPS Dual Timer Daniel Lezcano <daniel.lezcano@linaro.org> - 2016-07-07 11:00 +0200

Page 1 of 4  [1] 2 3 4  Next page →

#1438281 — [GIT PULL] clockevents for 4.8

FromDaniel Lezcano <daniel.lezcano@linaro.org>
Date2016-07-07 10:10 +0200
Subject[GIT PULL] clockevents for 4.8
Message-ID<rScxH-4ic-9@gated-at.bofh.it>
Hi Thomas,

this pull request contains the following changes:

 - Convert the clocksource-probe init functions to return a value in
order to prepare the consolidation of the drivers using the DT. It is a
big patchset but went through 01.org (kbuild bot), linux next and
kernel-ci (continuous integration) (Daniel Lezcano)

 - Fix a bad error handling by returning the right value for cadence_ttc
(Christophe Jaillet)

 - Fix typo in the Kconfig for the Samsung pwm (Alexandre Belloni)

 - Change functions to static for armada-370-xp and digicolor (Ben Dooks)

 - Add support for the rk3399 SoC timer by adding bindings and a slight
change in the base address. Take the opportunity to add the DYNIRQ flag
(Huang Tao)

 - Fix endian accessors for the Samsung pwm timer (Matthew Leach)

 - Add Oxford Semiconductor RPS Dual Timer driver (Neil Armstrong)

 - Add a kernel parameter to swich on/off the event stream feature of
the arch arm timer (Will Deacon)

Thanks !

   -- Daniel


The following changes since commit c7d6b5a22c00a19b513353469d89062264a7235f:

  Merge branch 'fortglx/4.8/time' of
https://git.linaro.org/people/john.stultz/linux into timers/core
(2016-06-21 08:22:51 +0200)

are available in the git repository at:


  http://git.linaro.org/people/daniel.lezcano/linux.git clockevents/4.8

for you to fetch changes up to 34c720a915857f168b98ab03f97b33784286e4ad:

  clocksource/drivers/cadence_ttc: fix a return value in case of error
(2016-07-07 09:44:38 +0200)

----------------------------------------------------------------
Alexandre Belloni (1):
      clocksource/drivers/samsung_pwm: Fix typo in Kconfig

Ben Dooks (2):
      clocksource/drivers/armada-370-xp: Make syscore_ops static
      clocksource/drivers/digicolor: Fix warning of non-static function

Christophe Jaillet (1):
      clocksource/drivers/cadence_ttc: fix a return value in case of error

Daniel Lezcano (81):
      of: Add a new macro to declare_of for one parameter function
returning a value
      clocksource/drivers/clksrc-probe: Introduce init functions with
return code
      clocksource/drivers/rockchip_timer: Convert init function to
return error
      clocksource/drivers/mtk_timer: Convert init function to return error
      clocksource/drivers/exynos_mct: Convert init function to return error
      clocksource/drivers/asm9260: Convert init function to return error
      clocksource/drivers/cadence_ttc: Convert init function to return error
      clocksource/drivers/st_lpc: Convert init function to return error
      clocksource/drivers/dw_apb_timer: Convert init function to return
error
      clocksource/drivers/clps711x: Convert init function to return error
      clocksource/drivers/digicolor: Convert init function to return error
      clocksource/drivers/armv7m_systick: Convert init function to
return error
      clocksource/drivers/bcm2835_timer: Convert init function to return
error
      clocksource/drivers/bcm_kona: Convert init function to return error
      clocksource/drivers/clksrc-dbx500: Convert init function to return
error
      clocksource/drivers/fsl_ftm_timer: Convert init function to return
error
      clocksource/drivers/arm_arch_timer: Convert init function to
return error
      clocksource/drivers/arm_global_timer: Convert init function to
return error
      clocksource/drivers/h8300_timer16: Convert init function to return
error
      clocksource/drivers/h8300_timer8: Convert init function to return
error
      clocksource/drivers/h8300_tpu: Convert init function to return error
      clocksource/drivers/meson6_timer.c: Convert init function to
return error
      clocksource/drivers/mips-gic-timer: Convert init function to
return error
      clocksource/drivers/moxart: Convert init function to return error
      clocksource/drivers/mps2-timer: Convert init function to return error
      clocksource/drivers/mxs: Convert init function to return error
      clocksource/drivers/nomadik-mtu: Convert init function to return error
      clocksource/drivers/pxa: Convert init function to return error
      clocksource/drivers/qcom: Convert init function to return error
      clocksource/drivers/samsung_pwm: Convert init function to return error
      clocksource/drivers/sun4i: Convert init function to return error
      clocksource/drivers/tango_xtal: Convert init function to return error
      clocksource/drivers/tegra20: Convert init function to return error
      clocksource/drivers/time-armada-370-xp: Convert init function to
return error
      clocksource/drivers/time-efm32: Convert init function to return error
      clocksource/drivers/time-lpc32xx: Convert init function to return
error
      clocksource/drivers/orion: Convert init function to return error
      clocksource/drivers/pistachio: Convert init function to return error
      clocksource/drivers/atlas7: Convert init function to return error
      clocksource/drivers/atmel-pit: Convert init function to return error
      clocksource/drivers/atmel-st: Convert init function to return error
      clocksource/drivers/prima2: Convert init function to return error
      clocksource/drivers/imx-gpt: Convert init function to return error
      clocksource/drivers/integrator-ap: Convert init function to return
error
      clocksource/drivers/keystone: Convert init function to return error
      clocksource/drivers/sp804: Convert init function to return error
      clocksource/drivers/stm32: Convert init function to return error
      clocksource/drivers/sun5i: Convert init function to return error
      clocksource/drivers/ti-32k: Convert init function to return error
      clocksource/drivers/u300: Convert init function to return error
      clocksource/drivers/versatile: Convert init function to return error
      clocksource/drivers/vf_pit_timer: Convert init function to return
error
      clocksource/drivers/vt8500: Convert init function to return error
      clocksource/drivers/zevio: Convert init function to return error
      clocksource/drivers/microblaze: Convert init function to return error
      clocksource/drivers/ralink: Convert init function to return error
      clocksource/drivers/nios2: Convert init function to return error
      clocksource/drivers/smp_twd: Convert init function to return error
      clocksource/drivers/nps: Convert init function to return error
      clocksource/drivers/arc: Convert init function to return error
      clocksource/drivers/oxnas-rps: Convert init function to return error
      clocksources: Switch back to the clksrc table
      clk: Add missing clk_get_sys() stub
      clocksource/drivers/bcm_kona: Remove useless header <asm/mach/time.h>
      clocksource/drivers/bcm2835: Add the COMPILE_TEST option
      clocksource/drivers/armv7m_systick: Add the COMPILE_TEST option
      clocksource/drivers/bcm_kona: Add the COMPILE_TEST option
      clocksource/drivers/clps_711x: Add the COMPILE_TEST option
      clocksource/drivers/atlas7: Add the COMPILE_TEST option
      clocksource/drivers/moxart: Add the COMPILE_TEST option
      clocksource/drivers/mxs: Remove useless header <asm/mach/time.h>
      clocksource/drivers/mxs: Add the COMPILE_TEST option
      clocksource/drivers/prima2: Remove useless header <asm/mach/time.h>
      clocksource/drivers/prima2: Add the COMPILE_TEST option
      clocksource/drivers/u300: Add the COMPILE_TEST option
      clocksource/drivers/nspire: Add the COMPILE_TEST option
      clocksource/drivers/keystone: Add the COMPILE_TEST option
      clocksource/drivers/integrator-ap: Add the COMPILE_TEST option
      clocksource/drivers/arm_global_timer: Add the COMPILE_TEST option
      clocksource/drivers/timer-atmel-st: Add the COMPILE_TEST option
      clocksource/drivers/versatile: Add the COMPILE_TEST option

Huang Tao (2):
      dt-bindings: Document rk3399 rk-timer bindings
      arm64: dts: rockchip: Add rktimer device node for rk3399

Huang, Tao (2):
      clocksource/drivers/rockchip: Add the dynamic irq flag to the timer
      clocksource/drivers/rockchip: Add support for the rk3399 SoC

Matthew Leach (1):
      clocksource/drivers/samsung_pwm_timer: Fix endian accessors

Neil Armstrong (2):
      clocksource/drivers/oxnas-rps: Add Oxford Semiconductor RPS Dual Timer
      dt-bindings: clocksource: Add Oxford Semiconductor RPS Timer bindings

Will Deacon (1):
      clocksource/drivers/arm_arch_timer: Control the evtstrm via the
cmdline

 .../devicetree/bindings/timer/oxsemi,rps-timer.txt |  17 ++
 ...chip,rk3288-timer.txt => rockchip,rk-timer.txt} |   6 +-
 Documentation/kernel-parameters.txt                |   8 +
 arch/arc/kernel/time.c                             |  63 +++--
 arch/arm/Kconfig                                   |   2 +-
 arch/arm/kernel/smp_twd.c                          |   3 +-
 arch/arm/mach-bcm/Kconfig                          |   2 +
 arch/arm/mach-integrator/Kconfig                   |   2 +-
 arch/arm/mach-keystone/Kconfig                     |   2 +-
 arch/arm/mach-moxart/Kconfig                       |   2 +-
 arch/arm/mach-mxs/Kconfig                          |   2 +-
 arch/arm/mach-nspire/Kconfig                       |   1 +
 arch/arm/mach-prima2/Kconfig                       |   2 +
 arch/arm/mach-u300/Kconfig                         |   2 +-
 arch/arm64/boot/dts/rockchip/rk3399.dtsi           |   8 +
 arch/microblaze/kernel/timer.c                     |  49 +++-
 arch/mips/ralink/cevt-rt3352.c                     |  17 +-
 arch/nios2/kernel/time.c                           |  63 +++--
 drivers/clocksource/Kconfig                        | 116 +++++++-
 drivers/clocksource/Makefile                       |  23 +-
 drivers/clocksource/arm_arch_timer.c               |  56 ++--
 drivers/clocksource/arm_global_timer.c             |  26 +-
 drivers/clocksource/armv7m_systick.c               |  17 +-
 drivers/clocksource/asm9260_timer.c                |  22 +-
 drivers/clocksource/bcm2835_timer.c                |  38 ++-
 drivers/clocksource/bcm_kona_timer.c               |  12 +-
 drivers/clocksource/cadence_ttc_timer.c            |  74 +++--
 drivers/clocksource/clksrc-dbx500-prcmu.c          |   4 +-
 drivers/clocksource/clksrc-probe.c                 |  14 +-
 drivers/clocksource/clksrc_st_lpc.c                |  20 +-
 drivers/clocksource/clps711x-timer.c               |  10 +-
 drivers/clocksource/dw_apb_timer_of.c              |   4 +-
 drivers/clocksource/exynos_mct.c                   |  32 ++-
 drivers/clocksource/fsl_ftm_timer.c                |  20 +-
 drivers/clocksource/h8300_timer16.c                |  12 +-
 drivers/clocksource/h8300_timer8.c                 |  11 +-
 drivers/clocksource/h8300_tpu.c                    |  10 +-
 drivers/clocksource/meson6_timer.c                 |  19 +-
 drivers/clocksource/mips-gic-timer.c               |  24 +-
 drivers/clocksource/moxart_timer.c                 |  39 ++-
 drivers/clocksource/mps2-timer.c                   |   8 +-
 drivers/clocksource/mtk_timer.c                    |   8 +-
 drivers/clocksource/mxs_timer.c                    |  26 +-
 drivers/clocksource/nomadik-mtu.c                  |  43 +--
 drivers/clocksource/pxa_timer.c                    |  44 ++-
 drivers/clocksource/qcom-timer.c                   |  23 +-
 drivers/clocksource/rockchip_timer.c               |  53 +++-
 drivers/clocksource/samsung_pwm_timer.c            |  70 ++---
 drivers/clocksource/sun4i_timer.c                  |  43 ++-
 drivers/clocksource/tango_xtal.c                   |  10 +-
 drivers/clocksource/tegra20_timer.c                |  24 +-
 drivers/clocksource/time-armada-370-xp.c           |  98 +++++--
 drivers/clocksource/time-efm32.c                   |  17 +-
 drivers/clocksource/time-lpc32xx.c                 |  10 +-
 drivers/clocksource/time-orion.c                   |  50 +++-
 drivers/clocksource/time-pistachio.c               |  18 +-
 drivers/clocksource/timer-atlas7.c                 |  30 ++-
 drivers/clocksource/timer-atmel-pit.c              |  41 ++-
 drivers/clocksource/timer-atmel-st.c               |  42 +--
 drivers/clocksource/timer-digicolor.c              |  16 +-
 drivers/clocksource/timer-imx-gpt.c                |  51 ++--
 drivers/clocksource/timer-integrator-ap.c          |  57 ++--
 drivers/clocksource/timer-keystone.c               |  13 +-
 drivers/clocksource/timer-nps.c                    |  14 +-
 drivers/clocksource/timer-oxnas-rps.c              | 297
+++++++++++++++++++++
 drivers/clocksource/timer-prima2.c                 |  42 ++-
 drivers/clocksource/timer-sp804.c                  |  86 ++++--
 drivers/clocksource/timer-stm32.c                  |   8 +-
 drivers/clocksource/timer-sun5i.c                  |  33 ++-
 drivers/clocksource/timer-ti-32k.c                 |   8 +-
 drivers/clocksource/timer-u300.c                   |  36 ++-
 drivers/clocksource/versatile.c                    |   6 +-
 drivers/clocksource/vf_pit_timer.c                 |  25 +-
 drivers/clocksource/vt8500_timer.c                 |  24 +-
 drivers/clocksource/zevio-timer.c                  |   4 +-
 include/clocksource/timer-sp804.h                  |   8 +-
 include/linux/clk.h                                |   4 +
 include/linux/clocksource.h                        |   2 +-
 include/linux/of.h                                 |   3 +
 79 files changed, 1628 insertions(+), 621 deletions(-)
 create mode 100644
Documentation/devicetree/bindings/timer/oxsemi,rps-timer.txt
 rename
Documentation/devicetree/bindings/timer/{rockchip,rk3288-timer.txt =>
rockchip,rk-timer.txt} (75%)
 create mode 100644 drivers/clocksource/timer-oxnas-rps.c


-- 
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

[toc] | [next] | [standalone]

#1438283 — [PATCH 30/93] clocksource/drivers/h8300_timer8: Convert init function to return error

FromDaniel Lezcano <daniel.lezcano@linaro.org>
Date2016-07-07 10:10 +0200
Subject[PATCH 30/93] clocksource/drivers/h8300_timer8: Convert init function to return error
Message-ID<rScxH-4ic-19@gated-at.bofh.it>
In reply to#1438281
The init functions do not return any error. They behave as the following:

  - panic, thus leading to a kernel crash while another timer may work and
       make the system boot up correctly

  or

  - print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/h8300_timer8.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/clocksource/h8300_timer8.c b/drivers/clocksource/h8300_timer8.c
index c151941..0292a19 100644
--- a/drivers/clocksource/h8300_timer8.c
+++ b/drivers/clocksource/h8300_timer8.c
@@ -164,24 +164,26 @@ static struct timer8_priv timer8_priv = {
 	},
 };
 
-static void __init h8300_8timer_init(struct device_node *node)
+static int __init h8300_8timer_init(struct device_node *node)
 {
 	void __iomem *base;
-	int irq;
+	int irq, ret;
 	struct clk *clk;
 
 	clk = of_clk_get(node, 0);
 	if (IS_ERR(clk)) {
 		pr_err("failed to get clock for clockevent\n");
-		return;
+		return PTR_ERR(clk);
 	}
 
+	ret = ENXIO;
 	base = of_iomap(node, 0);
 	if (!base) {
 		pr_err("failed to map registers for clockevent\n");
 		goto free_clk;
 	}
 
+	ret = -EINVAL;
 	irq = irq_of_parse_and_map(node, 0);
 	if (!irq) {
 		pr_err("failed to get irq for clockevent\n");
@@ -205,11 +207,12 @@ static void __init h8300_8timer_init(struct device_node *node)
 	clockevents_config_and_register(&timer8_priv.ced,
 					timer8_priv.rate, 1, 0x0000ffff);
 
-	return;
+	return 0;
 unmap_reg:
 	iounmap(base);
 free_clk:
 	clk_put(clk);
+	return ret;
 }
 
-CLOCKSOURCE_OF_DECLARE(h8300_8bit, "renesas,8bit-timer", h8300_8timer_init);
+CLOCKSOURCE_OF_DECLARE_RET(h8300_8bit, "renesas,8bit-timer", h8300_8timer_init);
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1438285 — [PATCH 04/93] clocksource/drivers/samsung_pwm: Fix typo in Kconfig

FromDaniel Lezcano <daniel.lezcano@linaro.org>
Date2016-07-07 10:10 +0200
Subject[PATCH 04/93] clocksource/drivers/samsung_pwm: Fix typo in Kconfig
Message-ID<rScxI-4ic-35@gated-at.bofh.it>
In reply to#1438281
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>

Correct the typo in "driver" word in the option description.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 47352d2..6bbd3d8 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -270,7 +270,7 @@ config CLKSRC_EXYNOS_MCT
 	  Support for Multi Core Timer controller on Exynos SoCs.
 
 config CLKSRC_SAMSUNG_PWM
-	bool "PWM timer drvier for Samsung S3C, S5P" if COMPILE_TEST
+	bool "PWM timer driver for Samsung S3C, S5P" if COMPILE_TEST
 	depends on GENERIC_CLOCKEVENTS
 	depends on HAS_IOMEM
 	help
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1438286 — [PATCH 18/93] clocksource/drivers/st_lpc: Convert init function to return error

FromDaniel Lezcano <daniel.lezcano@linaro.org>
Date2016-07-07 10:10 +0200
Subject[PATCH 18/93] clocksource/drivers/st_lpc: Convert init function to return error
Message-ID<rScxI-4ic-45@gated-at.bofh.it>
In reply to#1438281
The init functions do not return any error. They behave as the following:

 - panic, thus leading to a kernel crash while another timer may work and
   make the system boot up correctly

 or

 - print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
---
 drivers/clocksource/clksrc_st_lpc.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

diff --git a/drivers/clocksource/clksrc_st_lpc.c b/drivers/clocksource/clksrc_st_lpc.c
index 65ec467..c9022a9 100644
--- a/drivers/clocksource/clksrc_st_lpc.c
+++ b/drivers/clocksource/clksrc_st_lpc.c
@@ -92,7 +92,7 @@ static int __init st_clksrc_setup_clk(struct device_node *np)
 	return 0;
 }
 
-static void __init st_clksrc_of_register(struct device_node *np)
+static int __init st_clksrc_of_register(struct device_node *np)
 {
 	int ret;
 	uint32_t mode;
@@ -100,32 +100,36 @@ static void __init st_clksrc_of_register(struct device_node *np)
 	ret = of_property_read_u32(np, "st,lpc-mode", &mode);
 	if (ret) {
 		pr_err("clksrc-st-lpc: An LPC mode must be provided\n");
-		return;
+		return ret;
 	}
 
 	/* LPC can either run as a Clocksource or in RTC or WDT mode */
 	if (mode != ST_LPC_MODE_CLKSRC)
-		return;
+		return 0;
 
 	ddata.base = of_iomap(np, 0);
 	if (!ddata.base) {
 		pr_err("clksrc-st-lpc: Unable to map iomem\n");
-		return;
+		return -ENXIO;
 	}
 
-	if (st_clksrc_setup_clk(np)) {
+	ret = st_clksrc_setup_clk(np);
+	if (ret) {
 		iounmap(ddata.base);
-		return;
+		return ret;
 	}
 
-	if (st_clksrc_init()) {
+	ret = st_clksrc_init();
+	if (ret) {
 		clk_disable_unprepare(ddata.clk);
 		clk_put(ddata.clk);
 		iounmap(ddata.base);
-		return;
+		return ret;
 	}
 
 	pr_info("clksrc-st-lpc: clocksource initialised - running @ %luHz\n",
 		clk_get_rate(ddata.clk));
+
+	return ret;
 }
-CLOCKSOURCE_OF_DECLARE(ddata, "st,stih407-lpc", st_clksrc_of_register);
+CLOCKSOURCE_OF_DECLARE_RET(ddata, "st,stih407-lpc", st_clksrc_of_register);
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1438287 — [PATCH 42/93] clocksource/drivers/tango_xtal: Convert init function to return error

FromDaniel Lezcano <daniel.lezcano@linaro.org>
Date2016-07-07 10:10 +0200
Subject[PATCH 42/93] clocksource/drivers/tango_xtal: Convert init function to return error
Message-ID<rScxI-4ic-29@gated-at.bofh.it>
In reply to#1438281
The init functions do not return any error. They behave as the following:

  - panic, thus leading to a kernel crash while another timer may work and
       make the system boot up correctly

  or

  - print an error and leave the caller unaware of the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just returns an error code from the init function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
---
 drivers/clocksource/tango_xtal.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/clocksource/tango_xtal.c b/drivers/clocksource/tango_xtal.c
index c407c47..7dc716c 100644
--- a/drivers/clocksource/tango_xtal.c
+++ b/drivers/clocksource/tango_xtal.c
@@ -19,7 +19,7 @@ static u64 notrace read_sched_clock(void)
 	return read_xtal_counter();
 }
 
-static void __init tango_clocksource_init(struct device_node *np)
+static int __init tango_clocksource_init(struct device_node *np)
 {
 	struct clk *clk;
 	int xtal_freq, ret;
@@ -27,13 +27,13 @@ static void __init tango_clocksource_init(struct device_node *np)
 	xtal_in_cnt = of_iomap(np, 0);
 	if (xtal_in_cnt == NULL) {
 		pr_err("%s: invalid address\n", np->full_name);
-		return;
+		return -ENXIO;
 	}
 
 	clk = of_clk_get(np, 0);
 	if (IS_ERR(clk)) {
 		pr_err("%s: invalid clock\n", np->full_name);
-		return;
+		return PTR_ERR(clk);
 	}
 
 	xtal_freq = clk_get_rate(clk);
@@ -44,11 +44,13 @@ static void __init tango_clocksource_init(struct device_node *np)
 				    32, clocksource_mmio_readl_up);
 	if (ret) {
 		pr_err("%s: registration failed\n", np->full_name);
-		return;
+		return ret;
 	}
 
 	sched_clock_register(read_sched_clock, 32, xtal_freq);
 	register_current_timer_delay(&delay_timer);
+
+	return 0;
 }
 
-CLOCKSOURCE_OF_DECLARE(tango, "sigma,tick-counter", tango_clocksource_init);
+CLOCKSOURCE_OF_DECLARE_RET(tango, "sigma,tick-counter", tango_clocksource_init);
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1438288 — [PATCH 57/93] clocksource/drivers/stm32: Convert init function to return error

FromDaniel Lezcano <daniel.lezcano@linaro.org>
Date2016-07-07 10:10 +0200
Subject[PATCH 57/93] clocksource/drivers/stm32: Convert init function to return error
Message-ID<rScxI-4ic-39@gated-at.bofh.it>
In reply to#1438281
The init functions do not return any error. They behave as the following:

  - panic, thus leading to a kernel crash while another timer may work and
       make the system boot up correctly

  or

  - print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
---
 drivers/clocksource/timer-stm32.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/clocksource/timer-stm32.c b/drivers/clocksource/timer-stm32.c
index f3dcb76..d5bf352 100644
--- a/drivers/clocksource/timer-stm32.c
+++ b/drivers/clocksource/timer-stm32.c
@@ -98,7 +98,7 @@ static struct stm32_clock_event_ddata clock_event_ddata = {
 	},
 };
 
-static void __init stm32_clockevent_init(struct device_node *np)
+static int __init stm32_clockevent_init(struct device_node *np)
 {
 	struct stm32_clock_event_ddata *data = &clock_event_ddata;
 	struct clk *clk;
@@ -130,12 +130,14 @@ static void __init stm32_clockevent_init(struct device_node *np)
 
 	data->base = of_iomap(np, 0);
 	if (!data->base) {
+		ret = -ENXIO;
 		pr_err("failed to map registers for clockevent\n");
 		goto err_iomap;
 	}
 
 	irq = irq_of_parse_and_map(np, 0);
 	if (!irq) {
+		ret = -EINVAL;
 		pr_err("%s: failed to get irq.\n", np->full_name);
 		goto err_get_irq;
 	}
@@ -173,7 +175,7 @@ static void __init stm32_clockevent_init(struct device_node *np)
 	pr_info("%s: STM32 clockevent driver initialized (%d bits)\n",
 			np->full_name, bits);
 
-	return;
+	return ret;
 
 err_get_irq:
 	iounmap(data->base);
@@ -182,7 +184,7 @@ err_iomap:
 err_clk_enable:
 	clk_put(clk);
 err_clk_get:
-	return;
+	return ret;
 }
 
-CLOCKSOURCE_OF_DECLARE(stm32, "st,stm32-timer", stm32_clockevent_init);
+CLOCKSOURCE_OF_DECLARE_RET(stm32, "st,stm32-timer", stm32_clockevent_init);
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1438289 — [PATCH 11/93] of: Add a new macro to declare_of for one parameter function returning a value

FromDaniel Lezcano <daniel.lezcano@linaro.org>
Date2016-07-07 10:10 +0200
Subject[PATCH 11/93] of: Add a new macro to declare_of for one parameter function returning a value
Message-ID<rScxI-4ic-51@gated-at.bofh.it>
In reply to#1438281
The macro OF_DECLARE_1 expect a void (*func)(struct device_node *) while the
OF_DECLARE_2 expect a int (*func)(struct device_node *, struct device_node *).

The second one allows to pass an init function returning a value, which make
possible to call the functions in the table and check the return value in order
to catch at a higher level the errors and handle them from there instead of
doing a panic in each driver (well at least this is the case for the clkevt).

Unfortunately the OF_DECLARE_1 does not allow that and that lead to some code
duplication and crappyness in the drivers.

The OF_DECLARE_1 is used by all the clk drivers and the clocksource/clockevent
drivers. It is not possible to do the change in one shot as we have to change
all the init functions.

The OF_DECLARE_2 specifies an init function prototype with two parameters with
the node and its parent. The latter won't be used, ever, in the timer drivers.

Introduce a OF_DECLARE_1_RET macro to be used, and hopefully we can smoothly
and iteratively change the users of OF_DECLARE_1 to use the new macro instead.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
---
 include/linux/of.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/include/linux/of.h b/include/linux/of.h
index c7292e8..552943d 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -1009,10 +1009,13 @@ static inline int of_get_available_child_count(const struct device_node *np)
 #endif
 
 typedef int (*of_init_fn_2)(struct device_node *, struct device_node *);
+typedef int (*of_init_fn_1_ret)(struct device_node *);
 typedef void (*of_init_fn_1)(struct device_node *);
 
 #define OF_DECLARE_1(table, name, compat, fn) \
 		_OF_DECLARE(table, name, compat, fn, of_init_fn_1)
+#define OF_DECLARE_1_RET(table, name, compat, fn) \
+		_OF_DECLARE(table, name, compat, fn, of_init_fn_1_ret)
 #define OF_DECLARE_2(table, name, compat, fn) \
 		_OF_DECLARE(table, name, compat, fn, of_init_fn_2)
 
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1438290 — [PATCH 27/93] clocksource/drivers/arm_arch_timer: Convert init function to return error

FromDaniel Lezcano <daniel.lezcano@linaro.org>
Date2016-07-07 10:10 +0200
Subject[PATCH 27/93] clocksource/drivers/arm_arch_timer: Convert init function to return error
Message-ID<rScxJ-4ic-61@gated-at.bofh.it>
In reply to#1438281
The init functions do not return any error. They behave as the following:

  - panic, thus leading to a kernel crash while another timer may work and
       make the system boot up correctly

  or

  - print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/arm_arch_timer.c | 52 +++++++++++++++++++++++-------------
 1 file changed, 33 insertions(+), 19 deletions(-)

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 4814446..d0cda68 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -693,25 +693,26 @@ arch_timer_needs_probing(int type, const struct of_device_id *matches)
 	return needs_probing;
 }
 
-static void __init arch_timer_common_init(void)
+static int __init arch_timer_common_init(void)
 {
 	unsigned mask = ARCH_CP15_TIMER | ARCH_MEM_TIMER;
 
 	/* Wait until both nodes are probed if we have two timers */
 	if ((arch_timers_present & mask) != mask) {
 		if (arch_timer_needs_probing(ARCH_MEM_TIMER, arch_timer_mem_of_match))
-			return;
+			return 0;
 		if (arch_timer_needs_probing(ARCH_CP15_TIMER, arch_timer_of_match))
-			return;
+			return 0;
 	}
 
 	arch_timer_banner(arch_timers_present);
 	arch_counter_register(arch_timers_present);
-	arch_timer_arch_init();
+	return arch_timer_arch_init();
 }
 
-static void __init arch_timer_init(void)
+static int __init arch_timer_init(void)
 {
+	int ret;
 	/*
 	 * If HYP mode is available, we know that the physical timer
 	 * has been configured to be accessible from PL1. Use it, so
@@ -739,23 +740,30 @@ static void __init arch_timer_init(void)
 
 		if (!has_ppi) {
 			pr_warn("arch_timer: No interrupt available, giving up\n");
-			return;
+			return -EINVAL;
 		}
 	}
 
-	arch_timer_register();
-	arch_timer_common_init();
+	ret = arch_timer_register();
+	if (ret)
+		return ret;
+
+	ret = arch_timer_common_init();
+	if (ret)
+		return ret;
 
 	arch_timer_kvm_info.virtual_irq = arch_timer_ppi[VIRT_PPI];
+	
+	return 0;
 }
 
-static void __init arch_timer_of_init(struct device_node *np)
+static int __init arch_timer_of_init(struct device_node *np)
 {
 	int i;
 
 	if (arch_timers_present & ARCH_CP15_TIMER) {
 		pr_warn("arch_timer: multiple nodes in dt, skipping\n");
-		return;
+		return 0;
 	}
 
 	arch_timers_present |= ARCH_CP15_TIMER;
@@ -774,23 +782,23 @@ static void __init arch_timer_of_init(struct device_node *np)
 	    of_property_read_bool(np, "arm,cpu-registers-not-fw-configured"))
 		arch_timer_uses_ppi = PHYS_SECURE_PPI;
 
-	arch_timer_init();
+	return arch_timer_init();
 }
-CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_of_init);
-CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_of_init);
+CLOCKSOURCE_OF_DECLARE_RET(armv7_arch_timer, "arm,armv7-timer", arch_timer_of_init);
+CLOCKSOURCE_OF_DECLARE_RET(armv8_arch_timer, "arm,armv8-timer", arch_timer_of_init);
 
-static void __init arch_timer_mem_init(struct device_node *np)
+static int __init arch_timer_mem_init(struct device_node *np)
 {
 	struct device_node *frame, *best_frame = NULL;
 	void __iomem *cntctlbase, *base;
-	unsigned int irq;
+	unsigned int irq, ret = -EINVAL;
 	u32 cnttidr;
 
 	arch_timers_present |= ARCH_MEM_TIMER;
 	cntctlbase = of_iomap(np, 0);
 	if (!cntctlbase) {
 		pr_err("arch_timer: Can't find CNTCTLBase\n");
-		return;
+		return -ENXIO;
 	}
 
 	cnttidr = readl_relaxed(cntctlbase + CNTTIDR);
@@ -830,6 +838,7 @@ static void __init arch_timer_mem_init(struct device_node *np)
 		best_frame = of_node_get(frame);
 	}
 
+	ret= -ENXIO;
 	base = arch_counter_base = of_iomap(best_frame, 0);
 	if (!base) {
 		pr_err("arch_timer: Can't map frame's registers\n");
@@ -841,6 +850,7 @@ static void __init arch_timer_mem_init(struct device_node *np)
 	else
 		irq = irq_of_parse_and_map(best_frame, 0);
 
+	ret = -EINVAL;
 	if (!irq) {
 		pr_err("arch_timer: Frame missing %s irq",
 		       arch_timer_mem_use_virtual ? "virt" : "phys");
@@ -848,13 +858,17 @@ static void __init arch_timer_mem_init(struct device_node *np)
 	}
 
 	arch_timer_detect_rate(base, np);
-	arch_timer_mem_register(base, irq);
-	arch_timer_common_init();
+	ret = arch_timer_mem_register(base, irq);
+	if (ret)
+		goto out;
+
+	return arch_timer_common_init();
 out:
 	iounmap(cntctlbase);
 	of_node_put(best_frame);
+	return ret;
 }
-CLOCKSOURCE_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem",
+CLOCKSOURCE_OF_DECLARE_RET(armv7_arch_timer_mem, "arm,armv7-timer-mem",
 		       arch_timer_mem_init);
 
 #ifdef CONFIG_ACPI
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1438291 — [PATCH 59/93] clocksource/drivers/ti-32k: Convert init function to return error

FromDaniel Lezcano <daniel.lezcano@linaro.org>
Date2016-07-07 10:10 +0200
Subject[PATCH 59/93] clocksource/drivers/ti-32k: Convert init function to return error
Message-ID<rScxI-4ic-49@gated-at.bofh.it>
In reply to#1438281
The init functions do not return any error. They behave as the following:

  - panic, thus leading to a kernel crash while another timer may work and
       make the system boot up correctly

  or

  - print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/timer-ti-32k.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/clocksource/timer-ti-32k.c b/drivers/clocksource/timer-ti-32k.c
index 8518d9d..e4ad3c6e 100644
--- a/drivers/clocksource/timer-ti-32k.c
+++ b/drivers/clocksource/timer-ti-32k.c
@@ -88,14 +88,14 @@ static u64 notrace omap_32k_read_sched_clock(void)
 	return ti_32k_read_cycles(&ti_32k_timer.cs);
 }
 
-static void __init ti_32k_timer_init(struct device_node *np)
+static int __init ti_32k_timer_init(struct device_node *np)
 {
 	int ret;
 
 	ti_32k_timer.base = of_iomap(np, 0);
 	if (!ti_32k_timer.base) {
 		pr_err("Can't ioremap 32k timer base\n");
-		return;
+		return -ENXIO;
 	}
 
 	ti_32k_timer.counter = ti_32k_timer.base;
@@ -116,11 +116,13 @@ static void __init ti_32k_timer_init(struct device_node *np)
 	ret = clocksource_register_hz(&ti_32k_timer.cs, 32768);
 	if (ret) {
 		pr_err("32k_counter: can't register clocksource\n");
-		return;
+		return ret;
 	}
 
 	sched_clock_register(omap_32k_read_sched_clock, 32, 32768);
 	pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n");
+
+	return 0;
 }
-CLOCKSOURCE_OF_DECLARE(ti_32k_timer, "ti,omap-counter32k",
+CLOCKSOURCE_OF_DECLARE_RET(ti_32k_timer, "ti,omap-counter32k",
 		ti_32k_timer_init);
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1438292 — [PATCH 54/93] clocksource/drivers/integrator-ap: Convert init function to return error

FromDaniel Lezcano <daniel.lezcano@linaro.org>
Date2016-07-07 10:10 +0200
Subject[PATCH 54/93] clocksource/drivers/integrator-ap: Convert init function to return error
Message-ID<rScxJ-4ic-63@gated-at.bofh.it>
In reply to#1438281
The init functions do not return any error. They behave as the following:

  - panic, thus leading to a kernel crash while another timer may work and
       make the system boot up correctly

  or

  - print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/timer-integrator-ap.c | 59 ++++++++++++++++++++-----------
 1 file changed, 38 insertions(+), 21 deletions(-)

diff --git a/drivers/clocksource/timer-integrator-ap.c b/drivers/clocksource/timer-integrator-ap.c
index 3f59ac2..675face 100644
--- a/drivers/clocksource/timer-integrator-ap.c
+++ b/drivers/clocksource/timer-integrator-ap.c
@@ -36,11 +36,12 @@ static u64 notrace integrator_read_sched_clock(void)
 	return -readl(sched_clk_base + TIMER_VALUE);
 }
 
-static void integrator_clocksource_init(unsigned long inrate,
-					void __iomem *base)
+static int integrator_clocksource_init(unsigned long inrate,
+				       void __iomem *base)
 {
 	u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
 	unsigned long rate = inrate;
+	int ret;
 
 	if (rate >= 1500000) {
 		rate /= 16;
@@ -50,11 +51,15 @@ static void integrator_clocksource_init(unsigned long inrate,
 	writel(0xffff, base + TIMER_LOAD);
 	writel(ctrl, base + TIMER_CTRL);
 
-	clocksource_mmio_init(base + TIMER_VALUE, "timer2",
-			rate, 200, 16, clocksource_mmio_readl_down);
+	ret = clocksource_mmio_init(base + TIMER_VALUE, "timer2",
+				    rate, 200, 16, clocksource_mmio_readl_down);
+	if (ret)
+		return ret;
 
 	sched_clk_base = base;
 	sched_clock_register(integrator_read_sched_clock, 16, rate);
+
+	return 0;
 }
 
 static unsigned long timer_reload;
@@ -138,11 +143,12 @@ static struct irqaction integrator_timer_irq = {
 	.dev_id		= &integrator_clockevent,
 };
 
-static void integrator_clockevent_init(unsigned long inrate,
-				void __iomem *base, int irq)
+static int integrator_clockevent_init(unsigned long inrate,
+				      void __iomem *base, int irq)
 {
 	unsigned long rate = inrate;
 	unsigned int ctrl = 0;
+	int ret;
 
 	clkevt_base = base;
 	/* Calculate and program a divisor */
@@ -156,14 +162,18 @@ static void integrator_clockevent_init(unsigned long inrate,
 	timer_reload = rate / HZ;
 	writel(ctrl, clkevt_base + TIMER_CTRL);
 
-	setup_irq(irq, &integrator_timer_irq);
+	ret = setup_irq(irq, &integrator_timer_irq);
+	if (ret)
+		return ret;
+
 	clockevents_config_and_register(&integrator_clockevent,
 					rate,
 					1,
 					0xffffU);
+	return 0;
 }
 
-static void __init integrator_ap_timer_init_of(struct device_node *node)
+static int __init integrator_ap_timer_init_of(struct device_node *node)
 {
 	const char *path;
 	void __iomem *base;
@@ -176,12 +186,12 @@ static void __init integrator_ap_timer_init_of(struct device_node *node)
 
 	base = of_io_request_and_map(node, 0, "integrator-timer");
 	if (IS_ERR(base))
-		return;
+		return PTR_ERR(base);
 
 	clk = of_clk_get(node, 0);
 	if (IS_ERR(clk)) {
 		pr_err("No clock for %s\n", node->name);
-		return;
+		return PTR_ERR(clk);
 	}
 	clk_prepare_enable(clk);
 	rate = clk_get_rate(clk);
@@ -189,31 +199,38 @@ static void __init integrator_ap_timer_init_of(struct device_node *node)
 
 	err = of_property_read_string(of_aliases,
 				"arm,timer-primary", &path);
-	if (WARN_ON(err))
-		return;
+	if (err) {
+		pr_warn("Failed to read property");
+		return err;
+	}
+
 	pri_node = of_find_node_by_path(path);
+
 	err = of_property_read_string(of_aliases,
 				"arm,timer-secondary", &path);
-	if (WARN_ON(err))
-		return;
+	if (err) {
+		pr_warn("Failed to read property");		
+		return err;
+	}
+
+
 	sec_node = of_find_node_by_path(path);
 
-	if (node == pri_node) {
+	if (node == pri_node)
 		/* The primary timer lacks IRQ, use as clocksource */
-		integrator_clocksource_init(rate, base);
-		return;
-	}
+		return integrator_clocksource_init(rate, base);
 
 	if (node == sec_node) {
 		/* The secondary timer will drive the clock event */
 		irq = irq_of_parse_and_map(node, 0);
-		integrator_clockevent_init(rate, base, irq);
-		return;
+		return integrator_clockevent_init(rate, base, irq);
 	}
 
 	pr_info("Timer @%p unused\n", base);
 	clk_disable_unprepare(clk);
+
+	return 0;
 }
 
-CLOCKSOURCE_OF_DECLARE(integrator_ap_timer, "arm,integrator-timer",
+CLOCKSOURCE_OF_DECLARE_RET(integrator_ap_timer, "arm,integrator-timer",
 		       integrator_ap_timer_init_of);
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1438293 — [PATCH 58/93] clocksource/drivers/sun5i: Convert init function to return error

FromDaniel Lezcano <daniel.lezcano@linaro.org>
Date2016-07-07 10:10 +0200
Subject[PATCH 58/93] clocksource/drivers/sun5i: Convert init function to return error
Message-ID<rScxJ-4ic-67@gated-at.bofh.it>
In reply to#1438281
The init functions do not return any error. They behave as the following:

  - panic, thus leading to a kernel crash while another timer may work and
       make the system boot up correctly

  or

  - print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/timer-sun5i.c | 37 +++++++++++++++++++++++--------------
 1 file changed, 23 insertions(+), 14 deletions(-)

diff --git a/drivers/clocksource/timer-sun5i.c b/drivers/clocksource/timer-sun5i.c
index 24c83f9..f0a3ffb 100644
--- a/drivers/clocksource/timer-sun5i.c
+++ b/drivers/clocksource/timer-sun5i.c
@@ -311,33 +311,42 @@ err_free:
 	return ret;
 }
 
-static void __init sun5i_timer_init(struct device_node *node)
+static int __init sun5i_timer_init(struct device_node *node)
 {
 	struct reset_control *rstc;
 	void __iomem *timer_base;
 	struct clk *clk;
-	int irq;
+	int irq, ret;
 
 	timer_base = of_io_request_and_map(node, 0, of_node_full_name(node));
-	if (IS_ERR(timer_base))
-		panic("Can't map registers");
+	if (IS_ERR(timer_base)) {
+		pr_err("Can't map registers");
+		return PTR_ERR(timer_base);;
+	}
 
 	irq = irq_of_parse_and_map(node, 0);
-	if (irq <= 0)
-		panic("Can't parse IRQ");
+	if (irq <= 0) {
+		pr_err("Can't parse IRQ");
+		return -EINVAL;
+	}
 
 	clk = of_clk_get(node, 0);
-	if (IS_ERR(clk))
-		panic("Can't get timer clock");
+	if (IS_ERR(clk)) {
+		pr_err("Can't get timer clock");
+		return PTR_ERR(clk);
+	}
 
 	rstc = of_reset_control_get(node, NULL);
 	if (!IS_ERR(rstc))
 		reset_control_deassert(rstc);
 
-	sun5i_setup_clocksource(node, timer_base, clk, irq);
-	sun5i_setup_clockevent(node, timer_base, clk, irq);
+	ret = sun5i_setup_clocksource(node, timer_base, clk, irq);
+	if (ret)
+		return ret;
+
+	return sun5i_setup_clockevent(node, timer_base, clk, irq);
 }
-CLOCKSOURCE_OF_DECLARE(sun5i_a13, "allwinner,sun5i-a13-hstimer",
-		       sun5i_timer_init);
-CLOCKSOURCE_OF_DECLARE(sun7i_a20, "allwinner,sun7i-a20-hstimer",
-		       sun5i_timer_init);
+CLOCKSOURCE_OF_DECLARE_RET(sun5i_a13, "allwinner,sun5i-a13-hstimer",
+			   sun5i_timer_init);
+CLOCKSOURCE_OF_DECLARE_RET(sun7i_a20, "allwinner,sun7i-a20-hstimer",
+			   sun5i_timer_init);
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1438296 — [PATCH 19/93] clocksource/drivers/dw_apb_timer: Convert init function to return error

FromDaniel Lezcano <daniel.lezcano@linaro.org>
Date2016-07-07 10:10 +0200
Subject[PATCH 19/93] clocksource/drivers/dw_apb_timer: Convert init function to return error
Message-ID<rScxJ-4ic-75@gated-at.bofh.it>
In reply to#1438281
The init functions do not return any error. They behave as the following:

 - panic, thus leading to a kernel crash while another timer may work and
   make the system boot up correctly

 or

 - print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/dw_apb_timer_of.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c
index 860843c..4985a2c 100644
--- a/drivers/clocksource/dw_apb_timer_of.c
+++ b/drivers/clocksource/dw_apb_timer_of.c
@@ -143,7 +143,7 @@ static struct delay_timer dw_apb_delay_timer = {
 #endif
 
 static int num_called;
-static void __init dw_apb_timer_init(struct device_node *timer)
+static int __init dw_apb_timer_init(struct device_node *timer)
 {
 	switch (num_called) {
 	case 0:
@@ -164,8 +164,10 @@ static void __init dw_apb_timer_init(struct device_node *timer)
 	}
 
 	num_called++;
+
+	return 0;
 }
-CLOCKSOURCE_OF_DECLARE(pc3x2_timer, "picochip,pc3x2-timer", dw_apb_timer_init);
-CLOCKSOURCE_OF_DECLARE(apb_timer_osc, "snps,dw-apb-timer-osc", dw_apb_timer_init);
-CLOCKSOURCE_OF_DECLARE(apb_timer_sp, "snps,dw-apb-timer-sp", dw_apb_timer_init);
-CLOCKSOURCE_OF_DECLARE(apb_timer, "snps,dw-apb-timer", dw_apb_timer_init);
+CLOCKSOURCE_OF_DECLARE_RET(pc3x2_timer, "picochip,pc3x2-timer", dw_apb_timer_init);
+CLOCKSOURCE_OF_DECLARE_RET(apb_timer_osc, "snps,dw-apb-timer-osc", dw_apb_timer_init);
+CLOCKSOURCE_OF_DECLARE_RET(apb_timer_sp, "snps,dw-apb-timer-sp", dw_apb_timer_init);
+CLOCKSOURCE_OF_DECLARE_RET(apb_timer, "snps,dw-apb-timer", dw_apb_timer_init);
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1438299 — [PATCH 01/93] clocksource/drivers/armada-370-xp: Make syscore_ops static

FromDaniel Lezcano <daniel.lezcano@linaro.org>
Date2016-07-07 10:10 +0200
Subject[PATCH 01/93] clocksource/drivers/armada-370-xp: Make syscore_ops static
Message-ID<rScxH-4ic-11@gated-at.bofh.it>
In reply to#1438281
From: Ben Dooks <ben.dooks@codethink.co.uk>

The driver does not export armada_370_xp_timer_syscore_ops so
make it static to fix the following warning:

drivers/clocksource/time-armada-370-xp.c:249:20: warning: symbol 'armada_370_xp_timer_syscore_ops' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 drivers/clocksource/time-armada-370-xp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clocksource/time-armada-370-xp.c b/drivers/clocksource/time-armada-370-xp.c
index d93ec3c..601dbf74 100644
--- a/drivers/clocksource/time-armada-370-xp.c
+++ b/drivers/clocksource/time-armada-370-xp.c
@@ -246,7 +246,7 @@ static void armada_370_xp_timer_resume(void)
 	writel(timer0_local_ctrl_reg, local_base + TIMER_CTRL_OFF);
 }
 
-struct syscore_ops armada_370_xp_timer_syscore_ops = {
+static struct syscore_ops armada_370_xp_timer_syscore_ops = {
 	.suspend	= armada_370_xp_timer_suspend,
 	.resume		= armada_370_xp_timer_resume,
 };
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1438303 — [PATCH 69/93] clocksource/drivers/nps: Convert init function to return error

FromDaniel Lezcano <daniel.lezcano@linaro.org>
Date2016-07-07 10:20 +0200
Subject[PATCH 69/93] clocksource/drivers/nps: Convert init function to return error
Message-ID<rScHo-4lY-3@gated-at.bofh.it>
In reply to#1438299
The init functions do not return any error. They behave as the following:

  - panic, thus leading to a kernel crash while another timer may work and
       make the system boot up correctly

  or

  - print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/clocksource/timer-nps.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/clocksource/timer-nps.c b/drivers/clocksource/timer-nps.c
index d461089..b5c7b2b 100644
--- a/drivers/clocksource/timer-nps.c
+++ b/drivers/clocksource/timer-nps.c
@@ -55,8 +55,8 @@ static cycle_t nps_clksrc_read(struct clocksource *clksrc)
 	return (cycle_t)ioread32be(nps_msu_reg_low_addr[cluster]);
 }
 
-static void __init nps_setup_clocksource(struct device_node *node,
-					 struct clk *clk)
+static int __init nps_setup_clocksource(struct device_node *node,
+					struct clk *clk)
 {
 	int ret, cluster;
 
@@ -68,7 +68,7 @@ static void __init nps_setup_clocksource(struct device_node *node,
 	ret = clk_prepare_enable(clk);
 	if (ret) {
 		pr_err("Couldn't enable parent clock\n");
-		return;
+		return ret;
 	}
 
 	nps_timer_rate = clk_get_rate(clk);
@@ -79,20 +79,22 @@ static void __init nps_setup_clocksource(struct device_node *node,
 		pr_err("Couldn't register clock source.\n");
 		clk_disable_unprepare(clk);
 	}
+
+	return ret;
 }
 
-static void __init nps_timer_init(struct device_node *node)
+static int __init nps_timer_init(struct device_node *node)
 {
 	struct clk *clk;
 
 	clk = of_clk_get(node, 0);
 	if (IS_ERR(clk)) {
 		pr_err("Can't get timer clock.\n");
-		return;
+		return PTR_ERR(clk);
 	}
 
-	nps_setup_clocksource(node, clk);
+	return nps_setup_clocksource(node, clk);
 }
 
-CLOCKSOURCE_OF_DECLARE(ezchip_nps400_clksrc, "ezchip,nps400-timer",
-		       nps_timer_init);
+CLOCKSOURCE_OF_DECLARE_RET(ezchip_nps400_clksrc, "ezchip,nps400-timer",
+			   nps_timer_init);
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1438304 — [PATCH 71/93] clocksource/drivers/oxnas-rps: Convert init function to return error

FromDaniel Lezcano <daniel.lezcano@linaro.org>
Date2016-07-07 10:20 +0200
Subject[PATCH 71/93] clocksource/drivers/oxnas-rps: Convert init function to return error
Message-ID<rScHo-4lY-9@gated-at.bofh.it>
In reply to#1438299
The init functions do not return any error. They behave as the following:

  - panic, thus leading to a kernel crash while another timer may work and
       make the system boot up correctly

  or

  - print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/clocksource/timer-oxnas-rps.c | 33 ++++++++++++++++++++-------------
 1 file changed, 20 insertions(+), 13 deletions(-)

diff --git a/drivers/clocksource/timer-oxnas-rps.c b/drivers/clocksource/timer-oxnas-rps.c
index c002e99..0d99f40 100644
--- a/drivers/clocksource/timer-oxnas-rps.c
+++ b/drivers/clocksource/timer-oxnas-rps.c
@@ -220,32 +220,37 @@ static int __init oxnas_rps_clocksource_init(struct oxnas_rps_timer *rps)
 	return 0;
 }
 
-static void __init oxnas_rps_timer_init(struct device_node *np)
+static int __init oxnas_rps_timer_init(struct device_node *np)
 {
 	struct oxnas_rps_timer *rps;
 	void __iomem *base;
 	int ret;
 
 	rps = kzalloc(sizeof(*rps), GFP_KERNEL);
-	if (!rps) {
-		pr_err("Failed to allocate rps structure\n");
-		return;
-	}
+	if (!rps)
+		return -ENOMEM;
 
 	rps->clk = of_clk_get(np, 0);
-	if (WARN_ON(IS_ERR(rps->clk)))
+	if (IS_ERR(rps->clk)) {
+		ret = PTR_ERR(rps->clk);
 		goto err_alloc;
+	}
 
-	if (WARN_ON(clk_prepare_enable(rps->clk)))
+	ret = clk_prepare_enable(rps->clk);
+	if (ret)
 		goto err_clk;
 
 	base = of_iomap(np, 0);
-	if (WARN_ON(!base))
+	if (!base) {
+		ret = -ENXIO;
 		goto err_clk_prepare;
+	}
 
 	rps->irq = irq_of_parse_and_map(np, 0);
-	if (WARN_ON(rps->irq < 0))
+	if (rps->irq < 0) {
+		ret = -EINVAL;
 		goto err_iomap;
+	}
 
 	rps->clkevt_base = base + TIMER1_REG_OFFSET;
 	rps->clksrc_base = base + TIMER2_REG_OFFSET;
@@ -261,7 +266,7 @@ static void __init oxnas_rps_timer_init(struct device_node *np)
 	ret = request_irq(rps->irq, oxnas_rps_timer_irq,
 			  IRQF_TIMER | IRQF_IRQPOLL,
 			  "rps-timer", rps);
-	if (WARN_ON(ret))
+	if (ret)
 		goto err_iomap;
 
 	ret = oxnas_rps_clocksource_init(rps);
@@ -272,7 +277,7 @@ static void __init oxnas_rps_timer_init(struct device_node *np)
 	if (ret)
 		goto err_irqreq;
 
-	return;
+	return 0;
 
 err_irqreq:
 	free_irq(rps->irq, rps);
@@ -284,7 +289,9 @@ err_clk:
 	clk_put(rps->clk);
 err_alloc:
 	kfree(rps);
+
+	return ret;
 }
 
-CLOCKSOURCE_OF_DECLARE(ox810se_rps,
-		       "oxsemi,ox810se-rps-timer", oxnas_rps_timer_init);
+CLOCKSOURCE_OF_DECLARE_RET(ox810se_rps,
+			   "oxsemi,ox810se-rps-timer", oxnas_rps_timer_init);
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1438306 — [PATCH 51/93] clocksource/drivers/atmel-st: Convert init function to return error

FromDaniel Lezcano <daniel.lezcano@linaro.org>
Date2016-07-07 10:20 +0200
Subject[PATCH 51/93] clocksource/drivers/atmel-st: Convert init function to return error
Message-ID<rScHp-4lY-37@gated-at.bofh.it>
In reply to#1438299
The init functions do not return any error. They behave as the following:

  - panic, thus leading to a kernel crash while another timer may work and
       make the system boot up correctly

  or

  - print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/timer-atmel-st.c | 44 +++++++++++++++++++++++-------------
 1 file changed, 28 insertions(+), 16 deletions(-)

diff --git a/drivers/clocksource/timer-atmel-st.c b/drivers/clocksource/timer-atmel-st.c
index 29d21d6..e9331d3 100644
--- a/drivers/clocksource/timer-atmel-st.c
+++ b/drivers/clocksource/timer-atmel-st.c
@@ -194,15 +194,17 @@ static struct clock_event_device clkevt = {
 /*
  * ST (system timer) module supports both clockevents and clocksource.
  */
-static void __init atmel_st_timer_init(struct device_node *node)
+static int __init atmel_st_timer_init(struct device_node *node)
 {
 	struct clk *sclk;
 	unsigned int sclk_rate, val;
 	int irq, ret;
 
 	regmap_st = syscon_node_to_regmap(node);
-	if (IS_ERR(regmap_st))
-		panic(pr_fmt("Unable to get regmap\n"));
+	if (IS_ERR(regmap_st)) {
+		pr_err("Unable to get regmap\n");
+		return PTR_ERR(regmap_st);
+	}
 
 	/* Disable all timer interrupts, and clear any pending ones */
 	regmap_write(regmap_st, AT91_ST_IDR,
@@ -211,27 +213,37 @@ static void __init atmel_st_timer_init(struct device_node *node)
 
 	/* Get the interrupts property */
 	irq  = irq_of_parse_and_map(node, 0);
-	if (!irq)
-		panic(pr_fmt("Unable to get IRQ from DT\n"));
+	if (!irq) {
+		pr_err("Unable to get IRQ from DT\n");
+		return -EINVAL;
+	}
 
 	/* Make IRQs happen for the system timer */
 	ret = request_irq(irq, at91rm9200_timer_interrupt,
 			  IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
 			  "at91_tick", regmap_st);
-	if (ret)
-		panic(pr_fmt("Unable to setup IRQ\n"));
+	if (ret) {
+		pr_err("Unable to setup IRQ\n");
+		return ret;
+	}
 
 	sclk = of_clk_get(node, 0);
-	if (IS_ERR(sclk))
-		panic(pr_fmt("Unable to get slow clock\n"));
+	if (IS_ERR(sclk)) {
+		pr_err("Unable to get slow clock\n");
+		return PTR_ERR(sclk);
+	}
 
-	clk_prepare_enable(sclk);
-	if (ret)
-		panic(pr_fmt("Could not enable slow clock\n"));
+	ret = clk_prepare_enable(sclk);
+	if (ret) {
+		pr_err("Could not enable slow clock\n");
+		return ret;
+	}
 
 	sclk_rate = clk_get_rate(sclk);
-	if (!sclk_rate)
-		panic(pr_fmt("Invalid slow clock rate\n"));
+	if (!sclk_rate) {
+		pr_err("Invalid slow clock rate\n");
+		return -EINVAL;
+	}
 	timer_latch = (sclk_rate + HZ / 2) / HZ;
 
 	/* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used
@@ -246,7 +258,7 @@ static void __init atmel_st_timer_init(struct device_node *node)
 					2, AT91_ST_ALMV);
 
 	/* register clocksource */
-	clocksource_register_hz(&clk32k, sclk_rate);
+	return clocksource_register_hz(&clk32k, sclk_rate);
 }
-CLOCKSOURCE_OF_DECLARE(atmel_st_timer, "atmel,at91rm9200-st",
+CLOCKSOURCE_OF_DECLARE_RET(atmel_st_timer, "atmel,at91rm9200-st",
 		       atmel_st_timer_init);
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1438307 — [PATCH 55/93] clocksource/drivers/keystone: Convert init function to return error

FromDaniel Lezcano <daniel.lezcano@linaro.org>
Date2016-07-07 10:20 +0200
Subject[PATCH 55/93] clocksource/drivers/keystone: Convert init function to return error
Message-ID<rScHo-4lY-35@gated-at.bofh.it>
In reply to#1438299
The init functions do not return any error. They behave as the following:

  - panic, thus leading to a kernel crash while another timer may work and
       make the system boot up correctly

  or

  - print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
---
 drivers/clocksource/timer-keystone.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/clocksource/timer-keystone.c b/drivers/clocksource/timer-keystone.c
index 1cea08c..4199823 100644
--- a/drivers/clocksource/timer-keystone.c
+++ b/drivers/clocksource/timer-keystone.c
@@ -144,7 +144,7 @@ static int keystone_set_periodic(struct clock_event_device *evt)
 	return 0;
 }
 
-static void __init keystone_timer_init(struct device_node *np)
+static int __init keystone_timer_init(struct device_node *np)
 {
 	struct clock_event_device *event_dev = &timer.event_dev;
 	unsigned long rate;
@@ -154,20 +154,20 @@ static void __init keystone_timer_init(struct device_node *np)
 	irq  = irq_of_parse_and_map(np, 0);
 	if (!irq) {
 		pr_err("%s: failed to map interrupts\n", __func__);
-		return;
+		return -EINVAL;
 	}
 
 	timer.base = of_iomap(np, 0);
 	if (!timer.base) {
 		pr_err("%s: failed to map registers\n", __func__);
-		return;
+		return -ENXIO;
 	}
 
 	clk = of_clk_get(np, 0);
 	if (IS_ERR(clk)) {
 		pr_err("%s: failed to get clock\n", __func__);
 		iounmap(timer.base);
-		return;
+		return PTR_ERR(clk);
 	}
 
 	error = clk_prepare_enable(clk);
@@ -219,11 +219,12 @@ static void __init keystone_timer_init(struct device_node *np)
 	clockevents_config_and_register(event_dev, rate, 1, ULONG_MAX);
 
 	pr_info("keystone timer clock @%lu Hz\n", rate);
-	return;
+	return 0;
 err:
 	clk_put(clk);
 	iounmap(timer.base);
+	return error;
 }
 
-CLOCKSOURCE_OF_DECLARE(keystone_timer, "ti,keystone-timer",
-					keystone_timer_init);
+CLOCKSOURCE_OF_DECLARE_RET(keystone_timer, "ti,keystone-timer",
+			   keystone_timer_init);
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1438308 — [PATCH 73/93] clk: Add missing clk_get_sys() stub

FromDaniel Lezcano <daniel.lezcano@linaro.org>
Date2016-07-07 10:20 +0200
Subject[PATCH 73/93] clk: Add missing clk_get_sys() stub
Message-ID<rScHo-4lY-23@gated-at.bofh.it>
In reply to#1438299
When compiling with the COMPILE_TEST option set, the clps711x does not
compile because of the clk_get_sys() noop stub missing.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Michael Turquette <mturquette@baylibre.com>
---
 include/linux/clk.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/include/linux/clk.h b/include/linux/clk.h
index 0df4a51..834179f 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -461,6 +461,10 @@ static inline struct clk *clk_get_parent(struct clk *clk)
 	return NULL;
 }
 
+static inline struct clk *clk_get_sys(const char *dev_id, const char *con_id)
+{
+	return NULL;
+}
 #endif
 
 /* clk_prepare_enable helps cases using clk_enable in non-atomic context. */
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1438309 — [PATCH 52/93] clocksource/drivers/prima2: Convert init function to return error

FromDaniel Lezcano <daniel.lezcano@linaro.org>
Date2016-07-07 10:20 +0200
Subject[PATCH 52/93] clocksource/drivers/prima2: Convert init function to return error
Message-ID<rScHp-4lY-41@gated-at.bofh.it>
In reply to#1438299
The init functions do not return any error. They behave as the following:

  - panic, thus leading to a kernel crash while another timer may work and
       make the system boot up correctly

  or

  - print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/timer-prima2.c | 43 ++++++++++++++++++++++++++++----------
 1 file changed, 32 insertions(+), 11 deletions(-)

diff --git a/drivers/clocksource/timer-prima2.c b/drivers/clocksource/timer-prima2.c
index 2854c66..7b1084d 100644
--- a/drivers/clocksource/timer-prima2.c
+++ b/drivers/clocksource/timer-prima2.c
@@ -189,24 +189,36 @@ static void __init sirfsoc_clockevent_init(void)
 }
 
 /* initialize the kernel jiffy timer source */
-static void __init sirfsoc_prima2_timer_init(struct device_node *np)
+static int __init sirfsoc_prima2_timer_init(struct device_node *np)
 {
 	unsigned long rate;
 	struct clk *clk;
+	int ret;
 
 	clk = of_clk_get(np, 0);
-	BUG_ON(IS_ERR(clk));
+	if (IS_ERR(clk)) {
+		pr_err("Failed to get clock");
+		return PTR_ERR(clk);
+	}
 
-	BUG_ON(clk_prepare_enable(clk));
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		pr_err("Failed to enable clock");
+		return ret;
+	}
 
 	rate = clk_get_rate(clk);
 
-	BUG_ON(rate < PRIMA2_CLOCK_FREQ);
-	BUG_ON(rate % PRIMA2_CLOCK_FREQ);
+	if (rate < PRIMA2_CLOCK_FREQ || rate % PRIMA2_CLOCK_FREQ) {
+		pr_err("Invalid clock rate");
+		return -EINVAL;
+	}
 
 	sirfsoc_timer_base = of_iomap(np, 0);
-	if (!sirfsoc_timer_base)
-		panic("unable to map timer cpu registers\n");
+	if (!sirfsoc_timer_base) {
+		pr_err("unable to map timer cpu registers\n");
+		return -ENXIO;
+	}
 
 	sirfsoc_timer_irq.irq = irq_of_parse_and_map(np, 0);
 
@@ -216,14 +228,23 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np)
 	writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI);
 	writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS);
 
-	BUG_ON(clocksource_register_hz(&sirfsoc_clocksource,
-				       PRIMA2_CLOCK_FREQ));
+	ret = clocksource_register_hz(&sirfsoc_clocksource, PRIMA2_CLOCK_FREQ);
+	if (ret) {
+		pr_err("Failed to register clocksource");
+		return ret;
+	}
 
 	sched_clock_register(sirfsoc_read_sched_clock, 64, PRIMA2_CLOCK_FREQ);
 
-	BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq));
+	ret = setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq);
+	if (ret) {
+		pr_err("Failed to setup irq");
+		return ret;
+	}
 
 	sirfsoc_clockevent_init();
+
+	return 0;
 }
-CLOCKSOURCE_OF_DECLARE(sirfsoc_prima2_timer,
+CLOCKSOURCE_OF_DECLARE_RET(sirfsoc_prima2_timer,
 	"sirf,prima2-tick", sirfsoc_prima2_timer_init);
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1438312 — [PATCH 56/93] clocksource/drivers/sp804: Convert init function to return error

FromDaniel Lezcano <daniel.lezcano@linaro.org>
Date2016-07-07 10:20 +0200
Subject[PATCH 56/93] clocksource/drivers/sp804: Convert init function to return error
Message-ID<rScHp-4lY-47@gated-at.bofh.it>
In reply to#1438299
The init functions do not return any error. They behave as the following:

  - panic, thus leading to a kernel crash while another timer may work and
       make the system boot up correctly

  or

  - print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/timer-sp804.c | 90 +++++++++++++++++++++++++--------------
 include/clocksource/timer-sp804.h |  8 ++--
 2 files changed, 63 insertions(+), 35 deletions(-)

diff --git a/drivers/clocksource/timer-sp804.c b/drivers/clocksource/timer-sp804.c
index 5f45b9a..3dc47ef 100644
--- a/drivers/clocksource/timer-sp804.c
+++ b/drivers/clocksource/timer-sp804.c
@@ -77,7 +77,7 @@ void __init sp804_timer_disable(void __iomem *base)
 	writel(0, base + TIMER_CTRL);
 }
 
-void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
+int  __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
 						     const char *name,
 						     struct clk *clk,
 						     int use_sched_clock)
@@ -89,14 +89,13 @@ void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
 		if (IS_ERR(clk)) {
 			pr_err("sp804: clock not found: %d\n",
 			       (int)PTR_ERR(clk));
-			return;
+			return PTR_ERR(clk);
 		}
 	}
 
 	rate = sp804_get_clock_rate(clk);
-
 	if (rate < 0)
-		return;
+		return -EINVAL;
 
 	/* setup timer 0 as free-running clocksource */
 	writel(0, base + TIMER_CTRL);
@@ -112,6 +111,8 @@ void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
 		sched_clock_base = base;
 		sched_clock_register(sp804_read, 32, rate);
 	}
+
+	return 0;
 }
 
 
@@ -186,7 +187,7 @@ static struct irqaction sp804_timer_irq = {
 	.dev_id		= &sp804_clockevent,
 };
 
-void __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struct clk *clk, const char *name)
+int __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struct clk *clk, const char *name)
 {
 	struct clock_event_device *evt = &sp804_clockevent;
 	long rate;
@@ -196,12 +197,12 @@ void __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struc
 	if (IS_ERR(clk)) {
 		pr_err("sp804: %s clock not found: %d\n", name,
 			(int)PTR_ERR(clk));
-		return;
+		return PTR_ERR(clk);
 	}
 
 	rate = sp804_get_clock_rate(clk);
 	if (rate < 0)
-		return;
+		return -EINVAL;
 
 	clkevt_base = base;
 	clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ);
@@ -213,27 +214,31 @@ void __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struc
 
 	setup_irq(irq, &sp804_timer_irq);
 	clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);
+
+	return 0;
 }
 
-static void __init sp804_of_init(struct device_node *np)
+static int __init sp804_of_init(struct device_node *np)
 {
 	static bool initialized = false;
 	void __iomem *base;
-	int irq;
+	int irq, ret = -EINVAL;
 	u32 irq_num = 0;
 	struct clk *clk1, *clk2;
 	const char *name = of_get_property(np, "compatible", NULL);
 
 	base = of_iomap(np, 0);
-	if (WARN_ON(!base))
-		return;
+	if (!base)
+		return -ENXIO;
 
 	/* Ensure timers are disabled */
 	writel(0, base + TIMER_CTRL);
 	writel(0, base + TIMER_2_BASE + TIMER_CTRL);
 
-	if (initialized || !of_device_is_available(np))
+	if (initialized || !of_device_is_available(np)) {
+		ret = -EINVAL;
 		goto err;
+	}
 
 	clk1 = of_clk_get(np, 0);
 	if (IS_ERR(clk1))
@@ -256,35 +261,53 @@ static void __init sp804_of_init(struct device_node *np)
 
 	of_property_read_u32(np, "arm,sp804-has-irq", &irq_num);
 	if (irq_num == 2) {
-		__sp804_clockevents_init(base + TIMER_2_BASE, irq, clk2, name);
-		__sp804_clocksource_and_sched_clock_init(base, name, clk1, 1);
+
+		ret = __sp804_clockevents_init(base + TIMER_2_BASE, irq, clk2, name);
+		if (ret)
+			goto err;
+
+		ret = __sp804_clocksource_and_sched_clock_init(base, name, clk1, 1);
+		if (ret)
+			goto err;
 	} else {
-		__sp804_clockevents_init(base, irq, clk1 , name);
-		__sp804_clocksource_and_sched_clock_init(base + TIMER_2_BASE,
-							 name, clk2, 1);
+
+		ret = __sp804_clockevents_init(base, irq, clk1 , name);
+		if (ret)
+			goto err;
+
+		ret =__sp804_clocksource_and_sched_clock_init(base + TIMER_2_BASE,
+							      name, clk2, 1);
+		if (ret)
+			goto err;
 	}
 	initialized = true;
 
-	return;
+	return 0;
 err:
 	iounmap(base);
+	return ret;
 }
-CLOCKSOURCE_OF_DECLARE(sp804, "arm,sp804", sp804_of_init);
+CLOCKSOURCE_OF_DECLARE_RET(sp804, "arm,sp804", sp804_of_init);
 
-static void __init integrator_cp_of_init(struct device_node *np)
+static int __init integrator_cp_of_init(struct device_node *np)
 {
 	static int init_count = 0;
 	void __iomem *base;
-	int irq;
+	int irq, ret = -EINVAL;
 	const char *name = of_get_property(np, "compatible", NULL);
 	struct clk *clk;
 
 	base = of_iomap(np, 0);
-	if (WARN_ON(!base))
-		return;
+	if (!base) {
+		pr_err("Failed to iomap");
+		return -ENXIO;
+	}
+
 	clk = of_clk_get(np, 0);
-	if (WARN_ON(IS_ERR(clk)))
-		return;
+	if (IS_ERR(clk)) {
+		pr_err("Failed to get clock");
+		return PTR_ERR(clk);
+	}
 
 	/* Ensure timer is disabled */
 	writel(0, base + TIMER_CTRL);
@@ -292,19 +315,24 @@ static void __init integrator_cp_of_init(struct device_node *np)
 	if (init_count == 2 || !of_device_is_available(np))
 		goto err;
 
-	if (!init_count)
-		__sp804_clocksource_and_sched_clock_init(base, name, clk, 0);
-	else {
+	if (!init_count) {
+		ret = __sp804_clocksource_and_sched_clock_init(base, name, clk, 0);
+		if (ret)
+			goto err;
+	} else {
 		irq = irq_of_parse_and_map(np, 0);
 		if (irq <= 0)
 			goto err;
 
-		__sp804_clockevents_init(base, irq, clk, name);
+		ret = __sp804_clockevents_init(base, irq, clk, name);
+		if (ret)
+			goto err;
 	}
 
 	init_count++;
-	return;
+	return 0;
 err:
 	iounmap(base);
+	return ret;
 }
-CLOCKSOURCE_OF_DECLARE(intcp, "arm,integrator-cp-timer", integrator_cp_of_init);
+CLOCKSOURCE_OF_DECLARE_RET(intcp, "arm,integrator-cp-timer", integrator_cp_of_init);
diff --git a/include/clocksource/timer-sp804.h b/include/clocksource/timer-sp804.h
index 1f8a1ca..7654d71 100644
--- a/include/clocksource/timer-sp804.h
+++ b/include/clocksource/timer-sp804.h
@@ -3,10 +3,10 @@
 
 struct clk;
 
-void __sp804_clocksource_and_sched_clock_init(void __iomem *,
-					      const char *, struct clk *, int);
-void __sp804_clockevents_init(void __iomem *, unsigned int,
-			      struct clk *, const char *);
+int __sp804_clocksource_and_sched_clock_init(void __iomem *,
+					     const char *, struct clk *, int);
+int __sp804_clockevents_init(void __iomem *, unsigned int,
+			     struct clk *, const char *);
 void sp804_timer_disable(void __iomem *);
 
 static inline void sp804_clocksource_init(void __iomem *base, const char *name)
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

Page 1 of 4  [1] 2 3 4  Next page →

Back to top | Article view | linux.kernel

csiph-web