Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1439394 > unrolled thread

[PATCH] xen/acpi: allow xen-acpi-processor driver to load on Xen 4.7

Back to article view | Back to linux.kernel

Contents

  [PATCH] xen/acpi: allow xen-acpi-processor driver to load on  Xen 4.7 "Jan Beulich" <JBeulich@suse.com> - 2016-07-08 14:20 +0200
    Re: [PATCH] xen/acpi: allow xen-acpi-processor driver to load on Xen  4.7 David Vrabel <david.vrabel@citrix.com> - 2016-07-08 14:30 +0200
      Re: [PATCH] xen/acpi: allow xen-acpi-processor driver to load  on Xen 4.7 "Jan Beulich" <JBeulich@suse.com> - 2016-07-08 15:00 +0200
        Re: [Xen-devel] [PATCH] xen/acpi: allow xen-acpi-processor driver to  load on Xen 4.7 David Vrabel <david.vrabel@citrix.com> - 2016-07-08 16:00 +0200

#1439394 — [PATCH] xen/acpi: allow xen-acpi-processor driver to load on Xen 4.7

As of Xen 4.7 PV CPUID doesn't expose either of CPUID[1].ECX[7] and
CPUID[0x80000007].EDX[7] anymore, causing the driver to fail to load on
both Intel and AMD systems. Doing any kind of hardware capability
checks in the driver as a prerequisite was wrong anyway: With the
hypervisor being in charge, all such checking should be done by it. If
ACPI data gets uploaded despite some missing capability, the hypervisor
is free to ignore part or all of that data.

Ditch the entire check_prereq() function, and do the only valid check
(xen_initial_domain()) in the caller in its place.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
 drivers/xen/xen-acpi-processor.c |   35 +++--------------------------------
 1 file changed, 3 insertions(+), 32 deletions(-)

--- 4.7-rc6/drivers/xen/xen-acpi-processor.c
+++ 4.7-rc6-xen-acpi-processor-prereqs/drivers/xen/xen-acpi-processor.c
@@ -423,36 +423,7 @@ upload:
 
 	return 0;
 }
-static int __init check_prereq(void)
-{
-	struct cpuinfo_x86 *c = &cpu_data(0);
-
-	if (!xen_initial_domain())
-		return -ENODEV;
-
-	if (!acpi_gbl_FADT.smi_command)
-		return -ENODEV;
 
-	if (c->x86_vendor == X86_VENDOR_INTEL) {
-		if (!cpu_has(c, X86_FEATURE_EST))
-			return -ENODEV;
-
-		return 0;
-	}
-	if (c->x86_vendor == X86_VENDOR_AMD) {
-		/* Copied from powernow-k8.h, can't include ../cpufreq/powernow
-		 * as we get compile warnings for the static functions.
-		 */
-#define CPUID_FREQ_VOLT_CAPABILITIES    0x80000007
-#define USE_HW_PSTATE                   0x00000080
-		u32 eax, ebx, ecx, edx;
-		cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx);
-		if ((edx & USE_HW_PSTATE) != USE_HW_PSTATE)
-			return -ENODEV;
-		return 0;
-	}
-	return -ENODEV;
-}
 /* acpi_perf_data is a pointer to percpu data. */
 static struct acpi_processor_performance __percpu *acpi_perf_data;
 
@@ -509,10 +480,10 @@ struct notifier_block xen_acpi_processor
 static int __init xen_acpi_processor_init(void)
 {
 	unsigned int i;
-	int rc = check_prereq();
+	int rc;
 
-	if (rc)
-		return rc;
+	if (!xen_initial_domain())
+		return -ENODEV;
 
 	nr_acpi_bits = get_max_acpi_id() + 1;
 	acpi_ids_done = kcalloc(BITS_TO_LONGS(nr_acpi_bits), sizeof(unsigned long), GFP_KERNEL);

[toc] | [next] | [standalone]

#1439401 — Re: [PATCH] xen/acpi: allow xen-acpi-processor driver to load on Xen 4.7

On 08/07/16 13:15, Jan Beulich wrote:
> As of Xen 4.7 PV CPUID doesn't expose either of CPUID[1].ECX[7] and
> CPUID[0x80000007].EDX[7] anymore, causing the driver to fail to load on
> both Intel and AMD systems. Doing any kind of hardware capability
> checks in the driver as a prerequisite was wrong anyway: With the
> hypervisor being in charge, all such checking should be done by it. If
> ACPI data gets uploaded despite some missing capability, the hypervisor
> is free to ignore part or all of that data.
> 
> Ditch the entire check_prereq() function, and do the only valid check
> (xen_initial_domain()) in the caller in its place.

Thanks, but I'm not sure this is sufficient.  I think the generic ACPI
code needs to know the full capabilities in order to generate the
correct tables, or you won't get (for example) turbo mode working.

We had to fake the EST feature back in.

--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -448,7 +448,8 @@ static void __init xen_init_cpuid_mask(void)
 	if ((cx & xsave_mask) != xsave_mask)
 		cpuid_leaf1_ecx_mask &= ~xsave_mask; /* disable XSAVE & OSXSAVE */
 	if (xen_check_mwait())
-		cpuid_leaf1_ecx_set_mask = (1 << (X86_FEATURE_MWAIT % 32));
+		cpuid_leaf1_ecx_set_mask = (1 << (X86_FEATURE_MWAIT % 32)
+					   | 1 << (X86_FEATURE_EST % 32));
 }

 static void xen_set_debugreg(int reg, unsigned long val)

David

[toc] | [prev] | [next] | [standalone]

#1439431 — Re: [PATCH] xen/acpi: allow xen-acpi-processor driver to load on Xen 4.7

>>> On 08.07.16 at 14:29, <david.vrabel@citrix.com> wrote:
> On 08/07/16 13:15, Jan Beulich wrote:
>> As of Xen 4.7 PV CPUID doesn't expose either of CPUID[1].ECX[7] and
>> CPUID[0x80000007].EDX[7] anymore, causing the driver to fail to load on
>> both Intel and AMD systems. Doing any kind of hardware capability
>> checks in the driver as a prerequisite was wrong anyway: With the
>> hypervisor being in charge, all such checking should be done by it. If
>> ACPI data gets uploaded despite some missing capability, the hypervisor
>> is free to ignore part or all of that data.
>> 
>> Ditch the entire check_prereq() function, and do the only valid check
>> (xen_initial_domain()) in the caller in its place.
> 
> Thanks, but I'm not sure this is sufficient.  I think the generic ACPI
> code needs to know the full capabilities in order to generate the
> correct tables, or you won't get (for example) turbo mode working.
> 
> We had to fake the EST feature back in.
> 
> --- a/arch/x86/xen/enlighten.c
> +++ b/arch/x86/xen/enlighten.c
> @@ -448,7 +448,8 @@ static void __init xen_init_cpuid_mask(void)
>  	if ((cx & xsave_mask) != xsave_mask)
>  		cpuid_leaf1_ecx_mask &= ~xsave_mask; /* disable XSAVE & OSXSAVE */
>  	if (xen_check_mwait())
> -		cpuid_leaf1_ecx_set_mask = (1 << (X86_FEATURE_MWAIT % 32));
> +		cpuid_leaf1_ecx_set_mask = (1 << (X86_FEATURE_MWAIT % 32)
> +					   | 1 << (X86_FEATURE_EST % 32));
>  }
> 
>  static void xen_set_debugreg(int reg, unsigned long val)

Hmm, interesting. I admit I only tested on an AMD system, so I
can't exclude the above is necessary. Otoh going over generic
ACPI code the only use of X86_FEATURE_EST controls the
logging of a message. Plus there's a use in
arch_acpi_set_pdc_bits() - perhaps that's the one you mean?

There's certainly no use of X86_FEATURE_HW_PSTATE anywhere
in relevant code, so the AMD side would appear to be fine (which
matches my testing). So I think the patch is fine as is (also avoiding
cross component adjustments), and the part you suggest may then
better be a separate patch?

Jan

[toc] | [prev] | [next] | [standalone]

#1439478 — Re: [Xen-devel] [PATCH] xen/acpi: allow xen-acpi-processor driver to load on Xen 4.7

On 08/07/16 13:53, Jan Beulich wrote:
>>>> On 08.07.16 at 14:29, <david.vrabel@citrix.com> wrote:
>> On 08/07/16 13:15, Jan Beulich wrote:
>>> As of Xen 4.7 PV CPUID doesn't expose either of CPUID[1].ECX[7] and
>>> CPUID[0x80000007].EDX[7] anymore, causing the driver to fail to load on
>>> both Intel and AMD systems. Doing any kind of hardware capability
>>> checks in the driver as a prerequisite was wrong anyway: With the
>>> hypervisor being in charge, all such checking should be done by it. If
>>> ACPI data gets uploaded despite some missing capability, the hypervisor
>>> is free to ignore part or all of that data.
>>>
>>> Ditch the entire check_prereq() function, and do the only valid check
>>> (xen_initial_domain()) in the caller in its place.
>>
>> Thanks, but I'm not sure this is sufficient.  I think the generic ACPI
>> code needs to know the full capabilities in order to generate the
>> correct tables, or you won't get (for example) turbo mode working.
>>
>> We had to fake the EST feature back in.
>>
>> --- a/arch/x86/xen/enlighten.c
>> +++ b/arch/x86/xen/enlighten.c
>> @@ -448,7 +448,8 @@ static void __init xen_init_cpuid_mask(void)
>>  	if ((cx & xsave_mask) != xsave_mask)
>>  		cpuid_leaf1_ecx_mask &= ~xsave_mask; /* disable XSAVE & OSXSAVE */
>>  	if (xen_check_mwait())
>> -		cpuid_leaf1_ecx_set_mask = (1 << (X86_FEATURE_MWAIT % 32));
>> +		cpuid_leaf1_ecx_set_mask = (1 << (X86_FEATURE_MWAIT % 32)
>> +					   | 1 << (X86_FEATURE_EST % 32));
>>  }
>>
>>  static void xen_set_debugreg(int reg, unsigned long val)
> 
> Hmm, interesting. I admit I only tested on an AMD system, so I
> can't exclude the above is necessary. Otoh going over generic
> ACPI code the only use of X86_FEATURE_EST controls the
> logging of a message. Plus there's a use in
> arch_acpi_set_pdc_bits() - perhaps that's the one you mean?
> 
> There's certainly no use of X86_FEATURE_HW_PSTATE anywhere
> in relevant code, so the AMD side would appear to be fine (which
> matches my testing). So I think the patch is fine as is (also avoiding
> cross component adjustments), and the part you suggest may then
> better be a separate patch?

It's also possible that I'm misremembering why we went with the above hack.

I've applied your patch to for-linus-3.7b, thanks.

David

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web