Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1432469 > unrolled thread

[PATCH v1 3/5] ARM: dts: rockchip: add eDP/panel display device nodes for rk3288-evb

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v1 3/5] ARM: dts: rockchip: add eDP/panel display device nodes for rk3288-evb Yakir Yang <ykk@rock-chips.com> - 2016-06-28 07:00 +0200
    Re: [PATCH v1 3/5] ARM: dts: rockchip: add eDP/panel display device nodes for rk3288-evb Heiko Stuebner <heiko@sntech.de> - 2016-07-08 00:40 +0200

#1432469 — [PATCH v1 3/5] ARM: dts: rockchip: add eDP/panel display device nodes for rk3288-evb

The default eDP panel on RK3288 EVB board is LG LP079QX1-SP0V TFT LCD,
we haven't declared the panel regulator in the 'panel-simple' device
node here, so the specific board like ACT8846 / RK8080 need to support
the panel power supply.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
 arch/arm/boot/dts/rk3288-evb.dtsi | 43 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 42 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index 963365d..f293c44 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -48,7 +48,7 @@
 		reg = <0x0 0x80000000>;
 	};
 
-	backlight {
+	backlight: backlight {
 		compatible = "pwm-backlight";
 		brightness-levels = <
 			  0   1   2   3   4   5   6   7
@@ -97,6 +97,20 @@
 		#clock-cells = <0>;
 	};
 
+	panel: panel {
+		compatible ="lg,lp079qx1-sp0v", "simple-panel";
+		backlight = <&backlight>;
+		enable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&lcd_cs>;
+		ports {
+			panel_in: port {
+				panel_in_edp: endpoint {
+					remote-endpoint = <&edp_out_panel>;
+				};
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
@@ -216,6 +230,27 @@
 	status = "okay";
 };
 
+&edp_phy {
+	status = "okay";
+};
+
+&edp {
+	force-hpd;
+	status = "okay";
+
+	ports {
+		edp_out: port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			edp_out_panel: endpoint {
+				reg = <0>;
+				remote-endpoint = <&panel_in_edp>;
+			};
+		};
+	};
+};
+
 &i2c0 {
 	status = "okay";
 };
@@ -322,6 +357,12 @@
 			rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	lcd {
+		lcd_cs: lcd-cs {
+			rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &usbphy {
-- 
1.9.1

[toc] | [next] | [standalone]

#1438988

Am Dienstag, 28. Juni 2016, 12:51:18 schrieb Yakir Yang:
> The default eDP panel on RK3288 EVB board is LG LP079QX1-SP0V TFT LCD,
> we haven't declared the panel regulator in the 'panel-simple' device
> node here, so the specific board like ACT8846 / RK8080 need to support
> the panel power supply.
> 
> Signed-off-by: Yakir Yang <ykk@rock-chips.com>

applied, after reordering the entries to keep our alphabetical sorting.


Heiko

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web