Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1429951 > unrolled thread
| Started by | Boris Brezillon <boris.brezillon@free-electrons.com> |
|---|---|
| First post | 2016-06-23 18:10 +0200 |
| Last post | 2016-06-24 06:30 +0200 |
| Articles | 2 — 1 participant |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
Re: [PATCH v6 2/2] mtd: nand: sunxi: add reset line support Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-06-23 18:10 +0200
Re: [PATCH v6 2/2] mtd: nand: sunxi: add reset line support Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-06-24 06:30 +0200
| From | Boris Brezillon <boris.brezillon@free-electrons.com> |
|---|---|
| Date | 2016-06-23 18:10 +0200 |
| Subject | Re: [PATCH v6 2/2] mtd: nand: sunxi: add reset line support |
| Message-ID | <rNfmy-41u-27@gated-at.bofh.it> |
On Mon, 20 Jun 2016 12:48:38 +0800
Icenowy Zheng <icenowy@aosc.xyz> wrote:
> The NAND controller on some sun8i chips needs its reset line to be
> deasserted before they can enter working state.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
> ---
> Changes in v2:
> - Corrected the error checking code of reset line.
>
> Changes in v3:
> - Corrected a more serious error brought in the "fix" of v2.
>
> Changes in v4:
> - Removed unneeded code block after "else".
>
> Changes in v5:
> - Added reassertion code in case of initialization error and device
> remove.
>
> Changes in v6:
> - Fixed a resource leak by not using goto to exit in case of error.
>
> drivers/mtd/nand/sunxi_nand.c | 28 +++++++++++++++++++++++++---
> 1 file changed, 25 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
> index a83a690..08d5e88 100644
> --- a/drivers/mtd/nand/sunxi_nand.c
> +++ b/drivers/mtd/nand/sunxi_nand.c
> @@ -39,6 +39,7 @@
> #include <linux/gpio.h>
> #include <linux/interrupt.h>
> #include <linux/iopoll.h>
> +#include <linux/reset.h>
>
> #define NFC_REG_CTL 0x0000
> #define NFC_REG_ST 0x0004
> @@ -269,6 +270,7 @@ struct sunxi_nfc {
> void __iomem *regs;
> struct clk *ahb_clk;
> struct clk *mod_clk;
> + struct reset_control *reset;
> unsigned long assigned_cs;
> unsigned long clk_rate;
> struct list_head chips;
> @@ -1871,26 +1873,42 @@ static int sunxi_nfc_probe(struct platform_device *pdev)
> if (ret)
> goto out_ahb_clk_unprepare;
>
> + nfc->reset = devm_reset_control_get_optional(dev, "ahb");
> +
> + if (!IS_ERR(nfc->reset)) {
> + ret = reset_control_deassert(nfc->reset);
> + if (ret) {
> + dev_err(dev, "reset err %d\n", ret);
> + goto out_mod_clk_unprepare;
> + }
> + } else if (PTR_ERR(nfc->reset) != -ENOENT) {
> + ret = PTR_ERR(nfc->reset);
You should return -EDEFER_PROBE here.
And can you please rebase this series on top of nand/next [1]?
[1]https://github.com/linux-nand/linux/tree/nand/next
[toc] | [next] | [standalone]
| From | Boris Brezillon <boris.brezillon@free-electrons.com> |
|---|---|
| Date | 2016-06-24 06:30 +0200 |
| Message-ID | <rNqUH-3pa-43@gated-at.bofh.it> |
| In reply to | #1429951 |
On Fri, 24 Jun 2016 07:20:38 +0800
Icenowy Zheng <icenowy@aosc.xyz> wrote:
> In my opinion, return directly PTR_ERR(nfc->reset) is OK here.
> If devm_reset_control_get_optional() return -EPROBE_DEFER, the code here will also return it. However, if we get other error, why should it return -EPROBE_DEFER again?
Sorry, I just had a brainfart :-). Your implementation is correct.
BTW, can you avoid top-posting and reply inline?
>
> 24.06.2016, 00:01, "Boris Brezillon" <boris.brezillon@free-electrons.com>:
> > On Mon, 20 Jun 2016 12:48:38 +0800
> > Icenowy Zheng <icenowy@aosc.xyz> wrote:
> >
> >> The NAND controller on some sun8i chips needs its reset line to be
> >> deasserted before they can enter working state.
> >>
> >> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
> >> ---
> >> Changes in v2:
> >> - Corrected the error checking code of reset line.
> >>
> >> Changes in v3:
> >> - Corrected a more serious error brought in the "fix" of v2.
> >>
> >> Changes in v4:
> >> - Removed unneeded code block after "else".
> >>
> >> Changes in v5:
> >> - Added reassertion code in case of initialization error and device
> >> remove.
> >>
> >> Changes in v6:
> >> - Fixed a resource leak by not using goto to exit in case of error.
> >>
> >> drivers/mtd/nand/sunxi_nand.c | 28 +++++++++++++++++++++++++---
> >> 1 file changed, 25 insertions(+), 3 deletions(-)
> >>
> >> diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
> >> index a83a690..08d5e88 100644
> >> --- a/drivers/mtd/nand/sunxi_nand.c
> >> +++ b/drivers/mtd/nand/sunxi_nand.c
> >> @@ -39,6 +39,7 @@
> >> #include <linux/gpio.h>
> >> #include <linux/interrupt.h>
> >> #include <linux/iopoll.h>
> >> +#include <linux/reset.h>
> >>
> >> #define NFC_REG_CTL 0x0000
> >> #define NFC_REG_ST 0x0004
> >> @@ -269,6 +270,7 @@ struct sunxi_nfc {
> >> void __iomem *regs;
> >> struct clk *ahb_clk;
> >> struct clk *mod_clk;
> >> + struct reset_control *reset;
> >> unsigned long assigned_cs;
> >> unsigned long clk_rate;
> >> struct list_head chips;
> >> @@ -1871,26 +1873,42 @@ static int sunxi_nfc_probe(struct platform_device *pdev)
> >> if (ret)
> >> goto out_ahb_clk_unprepare;
> >>
> >> + nfc->reset = devm_reset_control_get_optional(dev, "ahb");
> >> +
> >> + if (!IS_ERR(nfc->reset)) {
> >> + ret = reset_control_deassert(nfc->reset);
> >> + if (ret) {
> >> + dev_err(dev, "reset err %d\n", ret);
> >> + goto out_mod_clk_unprepare;
> >> + }
> >> + } else if (PTR_ERR(nfc->reset) != -ENOENT) {
> >> + ret = PTR_ERR(nfc->reset);
> >
> > You should return -EDEFER_PROBE here.
> >
> > And can you please rebase this series on top of nand/next [1]?
> >
> > [1]https://github.com/linux-nand/linux/tree/nand/next
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web